Introduction to CDVI ADH-EPOXY Glass-to-Metal Bonding Kit
CDVI ADH-EPOXYis a two-part industrial epoxy bonding kit formulated specifically for glass-to-metal fixings, most notably to secure CDVI UBK series glass brackets (L, Z and armature housings) to glass doors. Designed for professional installers and access-control contractors, this compact kit provides an industrial/structural-strength bond where mechanical clamps or through-glass fixings are not practical or desirable. Whether you are fitting magnetic locks to frameless glass doors or attaching armature housings in a delicate architectural setting, ADH-EPOXY offers a purpose-built solution for those installations.
Key features at a glance
- Two-part epoxy resin:A resin + hardener system engineered to create a durable, permanent bond between glass and metal surfaces.
- Designed for CDVI UBK brackets:Intended specifically for the UBK L/Z brackets and related armature housings used in maglock applications.
- Industrial/structural bond strength:Rated conceptually for maglock fittings where high shear and peel resistance are required (consult manufacturer data for exact values).
- Compact, installer-friendly kit:Sized for single or small-number installations to keep waste and storage needs low.
- Professional use:Suited to trained access-control technicians who follow manufacturer installation and safety guidance.
Detailed specifications and benefits
The ADH-EPOXY kit is supplied by CDVI and referenced as ADH-EPOXY (CDVI ref E0900000021), with supplier code ITM002645. The packaged kit weight is approximately 0.3 kg, making it easy to transport to job sites and suitable for one-off or limited installations. The typical application is explicitly stated as bonding UBK L and Z brackets and armature housings to glass doors for magnetic lock installations.
Technical public data are intentionally limited on the public product page — the adhesive is described as a two-part epoxy (resin + hardener), but specific kit contents, cure times, and shear/peel strength values are not published online. This is common for professional-grade adhesives where manufacturers require installers to request Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for detailed application, handling, and compliance information. For this reason, CDVI advises installers to obtain the TDS/SDS directly from the manufacturer to verify cure schedules, load ratings, and test results for their particular installation conditions.
Benefits of this approach include:
- Purpose-built compatibility:Because the kit is developed for UBK brackets, it simplifies material selection and reduces the risk of incompatibility when compared to generic adhesives.
- Structural integrity:Two-part epoxies typically provide superior mechanical strength versus one-part adhesives, helping ensure a long service life when used correctly.
- Cleaner aesthetics:Bonding brackets directly to glass eliminates the need for visible mechanical clamps or bulky hardware on frameless doors.
- Compact packaging for small jobs:Reduces waste for smaller installations and is convenient for contractors servicing multiple sites.
ADH-EPOXY is sold with the expectation that professional installers will follow established safety practices. Work in a well-ventilated area, use appropriate personal protective equipment (PPE) such as gloves and eye protection, and follow the disposal guidance in the SDS. The manufacturer does not publish the SDS/TDS on the public product page; installers should request these documents from CDVI before use to confirm cure times, mixing ratios, environmental limitations (temperature, humidity), and specific mechanical performance data required for compliance and risk assessment.
Use cases and scenarios where ADH-EPOXY excels
ADH-EPOXY is tailored to installations where bonding glass to metal is necessary and mechanical fastening options are limited or undesirable. Typical use cases include:
- Frameless glass doors with maglocks:Frameless doors cannot easily accept traditional mechanical fasteners. ADH-EPOXY enables a strong, concealed bond between the UBK bracket and the glass surface to support a magnetic lock assembly.
- Architectural or aesthetic projects:When the visual appearance of a glass door must be maintained without visible clamps, adhesives offer a clean and discrete solution.
- Retrofitting and repairs:In retrofit jobs where drilling or mechanical alteration of the door is not feasible, bonding provides a minimally invasive option.
- Limited access installations:Small or complex glass assemblies where space prevents traditional clamping or bolting solutions.
Because the kit is compact and designed for professional users, it is particularly well suited to single-site installers, security contractors, and facilities managers performing targeted upgrades or new installations where reliability and neat finish are priorities.
Comparisons with similar products and alternative approaches
There are several methods and products that can be considered as alternatives to a two-part industrial epoxy kit like ADH-EPOXY. Below is a high-level comparison to help decide when ADH-EPOXY is the appropriate choice.
- Mechanical clamps and through-glass fixings:Mechanical solutions provide predictable structural performance and are often favored when glass can be safely drilled or framed. However, drilling compromises the integrity of some glass designs and impacts aesthetics. ADH-EPOXY avoids drilling and offers a hidden solution where aesthetics or glass integrity is a concern.
- Single-part adhesives (silicones, MS polymers):These are easier to apply and may offer good water resistance, but they generally do not match the mechanical strength of two-part structural epoxies. For maglock installations where shear strength matters, a two-part epoxy engineered for structural bonding is typically superior.
- Structural acrylics:Some structural acrylic adhesives provide fast cure and good adhesion to glass and metal. They can be a viable alternative, but compatibility with the specific UBK bracket materials and the load profile of maglocks should be confirmed. CDVI’s ADH-EPOXY is formulated for their bracket system, which can reduce uncertainty in compatibility.
- UV-cure adhesives:UV adhesives cure quickly and work well with transparent substrates, but they require line-of-sight exposure to UV and may not be suitable for opaque bracket interfaces or joints shaded from light.
Overall, ADH-EPOXY occupies the niche of a dedicated, manufacturer-specified epoxy solution for CDVI UBK brackets where proven bond strength and a discrete finish are priorities. The lack of published public technical data makes it important to obtain the TDS/SDS and any manufacturer testing relevant to your application before specifying it for projects requiring certified load ratings.
Public customer reviews for ADH-EPOXY are not widely published on the public product page. For many professional-access products of this kind, formal testimonials are often limited or collected through installer channels rather than public marketplaces. If you require customer feedback, we recommend contacting CDVI or authorized distributors for installer references or case studies they may hold.
In lieu of formal reviews, experienced installers commonly cite these practical considerations when choosing a bonding solution for maglocks:
- Verify cure time and handling window from the manufacturer so that bracket alignment can be maintained during setting.
- Confirm working temperature ranges and substrate preparation steps — proper glass and metal surface preparation significantly influences bond reliability.
- Keep a small supply of adhesive for touch-ups and one-off jobs; kits sized for small installations reduce wastage and storage handling.
Conclusion: Why choose CDVI ADH-EPOXY?
CDVI ADH-EPOXY is a focused, professional-grade solution for bonding UBK series brackets to glass doors when an industrial-strength, discreet fixing is required. Its two-part epoxy chemistry and compact kit format make it suitable for technicians performing maglock installations on frameless or framed glass doors where mechanical fixings are not possible or desired. The key advantages are manufacturer alignment with CDVI brackets, the structural intent of the adhesive, and the convenience of a kit sized for smaller jobs.
Before specifying ADH-EPOXY, obtain the TDS and SDS from CDVI to confirm cure times, shear and peel strength figures, environmental limitations, and handling instructions. This due diligence ensures the adhesive meets the mechanical and compliance requirements of your particular installation. When properly specified and applied by trained installers, ADH-EPOXY offers a discreet, durable method to secure magnetic lock hardware on glass doors while preserving aesthetics and glass integrity.
