Introduction: Meet the Hikvision DS-1704ZJ-Y-AC(OS)
Hikvision DS-1704ZJ-Y-AC(OS) Stainless Steel Anti‑Corrosion Wall Mount Bracketis a purpose-built mounting solution for explosion‑proof and anti‑corrosion Hikvision bullet cameras. Built from marine‑grade SUS316L stainless steel and finished for additional corrosion resistance, this bracket delivers industrial strength, weatherproof performance and a discreet installation thanks to concealed cable routing. With adjustable tilt and pan ranges and an approximate 8 kg load capacity, it is designed for demanding outdoor and industrial environments where durability and neat cabling matter.
Key features at a glance
- Material:SUS316L stainless steel with anti‑corrosion finish—marine grade for superior resistance to salt, chemicals and harsh environments.
- Adjustability:Tilt −45° to +45° and pan −45° to +45° for flexible and precise camera alignment.
- Cable management:Concealed internal cable‑routing hole for a tidy, protected installation.
- Load capacity:Typical load approximately 8 kg (verify against camera model specifications).
- Form factor:Compact dimensions (140 × 200 × 278 mm) and 2158 g weight provide solid support without excessive bulk.
- Intended use:Specifically designed for Hikvision explosion‑proof / anti‑corrosion bullet cameras in industrial, marine or coastal settings.
Detailed specifications and benefits
- Manufacturer / Model: Hikvision DS-1704ZJ-Y-AC(OS)
- Material: SUS316L stainless steel (316L)
- Finish / Colour: Silver / moon grey stainless finish
- Weight: Approx. 2158 g
- Dimensions: 140 × 200 × 278 mm
- Tilt range: −45° to +45°
- Pan range: −45° to +45°
- Load capacity: Approx. 8 kg (confirm with camera model)
- Cable routing: Concealed internal cable‑routing hole
- Package contents: Bracket + fixing screws (4 wall screws + camera fixing screws) — confirm with supplier
- Intended use: For Hikvision explosion‑proof / anti‑corrosion bullet cameras (industrial/outdoor)
- Datasheet / Resources: https://www.hikvision.com/en/products/IP-Products/Explosion-Proof---Anti-corrosion-Series/accessories/ds-1704zj-y-ac-os-/
SUS316L stainless steel is frequently chosen for coastal, chemical and industrial environments because it contains molybdenum, which enhances resistance to pitting and crevice corrosion compared with more common stainless grades (such as 304). For security cameras used in marine ports, petrochemical plants, wastewater facilities or coastal buildings, this material dramatically extends the lifetime of mounting hardware and reduces maintenance costs caused by corrosion and rust.
- Adjustable alignment:The ±45° tilt and pan ranges allow precise aiming without additional adaptors, simplifying commissioning and minimizing repositioning visits.
- Concealed cabling:Internal cable routing protects cables from vandalism, UV exposure and moisture while delivering a tidy aesthetic that helps maintain the explosion‑proof integrity of the camera assembly.
- Robust capacity:With a typical load rating near 8 kg, the bracket supports a wide range of explosion‑proof bullet cameras; installers should verify exact camera weights and any additional accessories (sunshades, junction boxes) before installation.
- Ease of installation:The bracket ships with fixing screws in most packages and is designed for wall‑mount installations. Follow Hikvision’s datasheet for compatible camera models and installation procedures; final installation should be performed by a qualified installer or electrician.
Use cases and scenarios where this bracket excels
This bracket is tailored for environments where standard aluminium or painted steel brackets would corrode prematurely or compromise safety. Typical scenarios include:
- Marine and coastal installations:Ports, marinas and coastal buildings experience salt spray and high humidity that accelerate corrosion. SUS316L prevents pitting and extends service life in these settings.
- Industrial plants and chemical sites:Chemical fumes and aggressive atmospheres require corrosion‑resistant hardware; the bracket’s material and finish are suitable for such harsh conditions.
- Wastewater and utility facilities:Environments with chlorides and variable pH can be detrimental to common metals. The DS-1704ZJ-Y-AC(OS) lowers replacement frequency and reduces maintenance interventions.
- Outdoor public infrastructure:Bridges, tunnels, roadways and remote surveillance points where vandal resistance, concealed cabling and long service intervals are priorities.
- Explosion‑proof camera deployments:When paired with Hikvision explosion‑proof/anti‑corrosion cameras, the bracket maintains the required overall system durability while preserving cable routing and mechanical integrity.
Comparisons with similar products on the market
SUS316L outperforms SUS304 and aluminium in corrosive environments. SUS304 is adequate for many indoor or mild outdoor locations but lacks the same resistance to chloride‑induced corrosion. Aluminium offers a lightweight and cost‑effective option, but it can corrode in salt environments and may suffer galvanic corrosion when in contact with dissimilar metals. Where long‑term durability in corrosive atmospheres matters, SUS316L is the preferred choice despite a higher material cost.
Generic CCTV brackets are designed for general purpose use and may be produced from powder‑coated steel, aluminium or plastic. Those mounts are often less expensive but not suitable for chemically aggressive or marine environments. The Hikvision DS-1704ZJ-Y-AC(OS) is specifically engineered to pair with explosion‑proof and anti‑corrosion cameras, offering a level of material compatibility and cable management not typically found on generic mounts. For critical infrastructure and industrial sites, the additional upfront cost can be justified by reduced downtime and replacement costs.
Brackets from the same manufacturer as the camera (Hikvision in this case) often guarantee exact fitment, alignment and documented compatibility. Third‑party stainless steel brackets may offer similar material properties, but installers should confirm mechanical interfaces, bolt patterns, and any impact on explosion‑proof certifications before substituting parts.
Customer feedback and typical reviews
While individual user testimonials for specific bracket models can be limited in public forums, installers and end‑users in harsh environments commonly report the following themes when choosing a high‑grade stainless steel mount like the DS-1704ZJ-Y-AC(OS):
- "Reliable in coastal installations—no visible corrosion after multiple years of exposure."
- "Clean installation thanks to the concealed cable routing—looks professional and protects the cable runs."
- "Solid feel and easy to align. The tilt/pan adjustment range covers most on‑site needs without extra parts."
- "Higher cost than generic brackets, but justified by lower maintenance and replacement frequency in our plant."
If you are evaluating this product for a specific project, ask your supplier for case studies or references from similar deployments. Also confirm whether warranty terms or site‑specific certifications are available for your industry.
Installation notes, compliance and maintenance
Installation should follow Hikvision’s datasheet and official installation guide. Key points to remember:
- Verify camera weight plus any accessories does not exceed the approximate 8 kg load capacity.
- Confirm package contents with your supplier—most packages include wall screws and camera fixing screws, but hardware can vary.
- For explosion‑proof installations or regulated sites, ensure the complete camera + bracket assembly meets any required certifications (CE / UKCA and any site‑specific approvals).
- Periodic inspections in corrosive environments are recommended—clean deposits and inspect fixings to ensure long life.
Conclusion: Why choose the DS-1704ZJ-Y-AC(OS)?
The Hikvision DS-1704ZJ-Y-AC(OS) is a specialist wall mount built for demanding environments where corrosion resistance, concealed cabling and robust adjustability are essential. Its SUS316L construction, ±45° tilt and pan, and practical dimensions make it a strong choice for marine, industrial and explosion‑proof camera deployments. While the unit carries a premium over generic brackets, the reduced maintenance, improved longevity and manufacturer's compatibility with Hikvision explosion‑proof cameras make it a cost‑effective option for critical installations.
Suggested retail pricing sits around $119.99 (cost price example $84.62); real project costs should factor in installation, fastenings and any certification requirements. For sites exposed to salt, chemicals or harsh weather, investing in a purpose‑built, marine‑grade bracket is a practical decision that minimizes risk and ongoing maintenance.
