Introduction to the 2 m RG59 BNC Patch Lead (ITM001076)
Economical 2 m RG59 BNC patch lead for CCTV and video connections.The 2 m RG59 BNC Patch Lead (BNC Male–Male, 75 , supplier code ITM001076) is a straightforward, cost-effective cable designed for short interconnects in CCTV and standard-definition video systems. At a suggested price of .99 and a cost price of .40, this item targets installers, integrators and DIY users who need reliable, short-run BNC connections without paying for premium cable types or custom assemblies.
- Length: 2 m—ideal for patching between cameras, DVRs, monitors and extension points.
- Cable type: RG59 coaxial, designed for 75 video systems.
- Connectors: BNC male to BNC male bayonet connectors for standard CCTV equipment.
- Intended use: short patch runs and interconnects; supplied as a single lead. Current stock: 30 units.
Detailed specifications and benefits
The technical listing for ITM001076 identifies the core attributes you need to match this lead to your system: a 2 m RG59 coaxial cable terminated with BNC male connectors and having a characteristic impedance of 75 . RG59 is the common coaxial choice for many analogue CCTV systems and some low-bandwidth HD solutions that use coaxial signalling.
- Length:2 m, which minimizes signal loss and keeps cable runs tidy for short distances.
- Connector type:BNC male to BNC male—fits standard camera, DVR and monitor inputs that accept 75 BNC terminations.
- Impedance:75 , matched to CCTV video equipment to avoid reflections and signal degradation when used for short connections.
- Branding / manufacturer notes:Product record references Haydon in the listing and a dynamic manufacturer reference in a third-party listing for the same supplier code. Full conductor AWG, shielding percentage, plating and jacket material are not provided in the product record; consult your supplier for complete electrical/mechanical data if these are critical to your installation.
- Cost-effective: Low unit cost makes it practical to keep several on-hand for rapid installs or temporary setups.
- Plug-and-play: Pre-terminated BNC connectors remove the need for on-site crimping or soldering.
- Compact and convenient: 2 m is a useful length for patching equipment racks, tidy camera-to-dedicated point links and connecting test equipment.
- Compatibility: Works with the large installed base of 75 CCTV equipment and legacy video gear.
Use cases and scenarios where the product excels
This patch lead is designed for short-run video interconnects rather than long-distance coaxial distribution. Typical scenarios include:
When arranging DVRs, monitors and switchers in a rack or test bench, 2 m leads keep the front area tidy and allow quick swapping of sources and displays without re-terminating cable ends.
For cameras that are within a couple of metres of a junction box, short post or coupler, this lead is a fast solution—especially useful during commissioning or temporary installations.
Exhibitions, demonstrations, training sessions and temporary surveillance setups benefit from inexpensive, reusable patch leads that can be deployed quickly and stored compactly.
Installers often keep a selection of common lengths on hand for repairs or troubleshooting. The economical price point makes stocking multiples practical.
Comparisons with similar products on the market
When selecting a coaxial patch lead, consider three main comparison axes: cable type and construction, connector quality, and application rating (indoor/outdoor/in-wall/plenum). The ITM001076 2 m RG59 BNC lead positions itself as an economical indoor patch lead for short runs. Here are a few common comparisons:
- RG59: Smaller diameter, commonly used for CCTV and short video runs. Easier to route in tight spaces but has slightly higher attenuation than RG6 at higher frequencies.
- RG6: Thicker, typically used for satellite, cable TV and longer-distance video runs because of lower loss. For short CCTV patch runs, RG59 and RG6 often perform equivalently, but RG6 may be preferred for longer distances or higher-frequency signals.
- Pre-terminated (like ITM001076): Fast to deploy, consistent termination quality when sourced from a reliable supplier, ideal for patching and temporary work.
- Bulk cable with field termination: Offers customization of length and connector type, can be installed in-wall or outdoor when appropriate jacket and ratings are selected. Requires crimping/soldering tools and skill.
- Economy leads: Lower price, suitable for general CCTV use where ultra-low loss is not required for short distances.
- Premium leads: May offer higher shielding percentage, precision impedance control, gold-plated connectors and certified materials—useful for critical or professional installations where every dB of performance matters or where connectors will undergo frequent matings.
Customer testimonials or reviews
No customer testimonials or formal reviews were provided in the product record for ITM001076. Based on typical user experiences for this class of product, common feedback themes are:
- Positive: Reliable for short connections, useful as spare leads for field technicians, excellent value for money.
- Neutral: Sufficient for indoor/CCTV patch use but not specified for in-wall or outdoor-rated installations.
- Concerns: Lack of full technical details (shielding %, conductor gauge, jacket rating) and absence of explicit CE/UKCA markings in the record means customers who require certification will ask for verification from the supplier.
Installation notes, safety and compliance
The product record does not list CE/UKCA markings or other certifications. Before using this cable in regulated environments or permanent in-wall installations, confirm compliance with local building and electrical regulations and request full specification sheets from the supplier or manufacturer. The lead is intended for short patch runs; it is not recommended as a fixed in-wall cable unless the jacket material and flame rating are verified and allowed in your jurisdiction.
Accessories and related items
- BNC crimps and a crimping tool—if you prefer custom lengths or need to repair connectors.
- BNC couplers and adaptors—to convert or extend connections.
- RG6 leads or low-loss premium BNC patch leads—if longer runs or reduced attenuation is needed.
Conclusion: Why choose the 2 m RG59 BNC Patch Lead (ITM001076)?
For installers, integrators and DIY users who need a simple, cost-effective solution for short CCTV and video interconnects, the 2 m RG59 BNC patch lead (ITM001076) represents good value. It delivers the standard 75 impedance and common BNC male terminations used throughout legacy and many current CCTV setups, simplifies deployment with pre-terminated plugs, and is inexpensive enough to keep as a spare or for temporary rigs.
However, if your project demands documented electrical/mechanical details, certified materials for in-wall or outdoor use, or premium low-loss performance over longer distances, ask your supplier for the full manufacturer datasheet or consider RG6 or higher-spec cable assemblies. For routine indoor patching, testing and short CCTV interconnects, this lead is a practical and economical choice.
