Introduction: Compact, weather‑resistant emergency lighting
3.5W IP65 LED Emergency Bulkhead (ITM003332)is a compact, energy‑efficient emergency luminaire designed to provide reliable illumination for safety and escape routes in locations that demand weather resistance. With a 3.5W LED source and an IP65 ingress protection rating, this bulkhead is intended for wall or ceiling mounting and can be switched between maintained and non‑maintained modes to suit different installation needs. Its small footprint, straightforward installation and low running cost make it an attractive option for commercial and domestic common areas where a robust, waterproof emergency light is required.
Key features at a glance
- Energy efficient 3.5W LED— low power consumption for reduced running costs.
- IP65 rating— dust tight and protected against water jets, suitable for covered outdoor or damp environments.
- Switchable maintained & non‑maintained modes— can operate as a permanent exit/indicator light or as a standby emergency luminaire.
- Bulkhead form factor— compact design for wall or ceiling mounting in corridors, stairwells or covered walkways.
- Brand & code— Dynamic, supplier code ITM003332.
Detailed specifications and benefits
Below is a practical breakdown of the available product specifications and the benefits they deliver. Some standard fields are currently listed asINSUFFICIENT DATAin the supplied information — these gaps are noted and explained where relevant.
- Brand:Dynamic — a supplier label that can be useful for traceability in procurement.
- Supplier code:ITM003332 — use this when ordering or requesting technical documentation.
- Form factor:Bulkhead (wall/ceiling) — versatile for different mounting positions.
- Stock:7 units (as provided) — useful for immediate purchasing decisions.
- Wattage:3.5 W LED — provides a modest but efficient light output suitable for emergency/indicator duties with very low energy usage.
- IP rating:IP65 — means the unit is dust tight and protected against water jets, making it suitable for covered exterior locations, plant rooms, garages and other potentially damp or dusty spaces.
- Emergency modes:Switchable maintained & non‑maintained — flexibility to use the same product either as a permanent illuminated exit sign or as an emergency-only fitting that remains off until mains failure.
- Missing photometrics:Battery type, emergency duration, lumen output, CCT, CRI and input voltage are currently listed as INSUFFICIENT DATA. These details directly affect performance (brightness, emergency run time and colour temperature) and must be confirmed before final specification for critical installations.
- Dimensions & weight:Not supplied — check with the manufacturer if space constraints or specific mounting boxes are involved.
- IK rating, certifications & warranty:Not supplied — there is no certification data in the provided information. This is important: always confirm compliance with local emergency lighting regulations (for example EN standards, UKCA/CE marking where applicable) and obtain warranty details.
- Cost price:12.00
- Suggested RRP:19.99 — an affordable retail price point that positions this unit as budget‑friendly for small projects or stock purchases.
Benefits explained
- Low running cost:The 3.5W LED load keeps energy use and heat generation to a minimum, which is favourable where many units are deployed.
- Weather resistance:IP65 protection broadens possible installation locations into covered outdoor walkways, porches and damp internal spaces that would rule out non‑IP rated fittings.
- Flexible operation:Being switchable between maintained and non‑maintained modes reduces the need for different product SKUs for different applications.
- Compact size:Bulkhead style is space‑efficient and unobtrusive, reducing visual impact while still meeting essential safety requirements.
Use cases and scenarios where this product excels
The IP65 3.5W LED Emergency Bulkhead is especially well suited to situations where you need modest emergency illumination in environments that may be exposed to dust or occasional water ingress. Typical use cases include:
- Commercial common areas:Corridors, lobbies and stairwells in flats or small commercial premises where discrete emergency lighting is required.
- External covered walkways and entrances:Locations protected from direct rainfall but exposed to wind‑driven water or spray, where IP65 protection provides peace of mind.
- Service rooms and plant areas:Spaces with dust or occasional moisture where a rugged emergency fixture is preferred.
- Domestic shared spaces:Hallways, communal stairwells or bin stores in multi‑occupancy buildings where building managers seek a cost‑effective emergency lighting option.
- Temporary installations and retrofits:The small bulkhead format simplifies replacement of older fittings or use in temporary escape route setups on construction or refurbishment sites (subject to compliance checks).
Comparisons with similar products on the market
When assessing this 3.5W IP65 bulkhead against comparable emergency luminaires, consider these factors:
- Power & efficiency:Many emergency bulkheads range from 1W indicator lights up to 6W+ units intended for brighter corridor illumination. At 3.5W this Dynamic unit sits in a middle ground — more capable than economy indicator lamps but less bright than dedicated corridor units that deliver higher lumen outputs.
- Ingress protection:IP65 is a strong advantage over IP20/IP44 domestic units for exposed or damp locations. For fully outdoor, unprotected applications you would typically look for IP66/67 fixtures.
- Modes:Switchable maintained/non‑maintained is a standard convenience found on many modern emergency units; the advantage here is reduced parts complexity in projects with mixed requirements.
- Certifications and data:Where this product falls short compared with premium brands is the absence of supplied certification and detailed photometric/emergency duration data. Market leaders often provide detailed emergency run times (e.g., 3 hours), lumen outputs, beam spreads and compliance declarations — all essential for specifying into regulated buildings.
- Price point:With a suggested RRP of 19.99 it competes strongly on price with budget emergency bulkheads, though buyers should weigh the low cost against the need to verify performance and compliance details.
Customer testimonials / reviews
No customer testimonials or formal reviews were supplied with the product data. If you plan to display reviews in marketing or on a product page, it is advisable to gather feedback from early installations (ease of fit, perceived brightness, battery life and longevity) and to request technical verification from the supplier so review claims can be supported with objective data.
Practical notes and installation guidance
- Confirm missing details:Before specifying this unit for critical escape routes, obtain the battery type, emergency duration (typical industry minimum is 3 hours), lumen output and relevant certifications from Dynamic or an authorised distributor.
- Installation:Isolate mains supply before work. Wiring and testing should be carried out by a competent person or qualified electrician to ensure compliance with local regulations and emergency lighting standards.
- Maintenance:Regular testing and battery checks are a legal requirement in many jurisdictions for emergency lighting. Ensure a maintenance regime is in place and document test results.
Conclusion: Why this product is a strong choice — with due diligence
The 3.5W IP65 LED Emergency Bulkhead (ITM003332) offers a compelling combination of energy efficiency, weather resistance and flexible operation at an attractive price point. For projects where modest emergency illumination in damp or dusty conditions is required, and where budget is a priority, this bulkhead is a practical choice. Its switchable maintained/non‑maintained feature reduces inventory complexity and the IP65 rating opens up more installation locations than standard indoor emergency lights.
However, this product should be specified only after confirming a few key technical and compliance items that were not included in the supplied information: battery details and rated emergency duration, lumen output and colour temperature, input/driver specifications, dimensions and formal certification/warranty. Once those items are verified, the Dynamic ITM003332 can be confidently deployed across a broad range of commercial and domestic emergency lighting applications.
Tip:If you would like, I can attempt to source the official datasheet for ITM003332, draft a complete spec sheet with typical comparable values (clearly labelled), or provide purchase and installation checklists to help integrate this product into your project.
