Morley DXc Network Card Kit, DXc Panel Network Interface, 795-099

Introduction to the Morley DXc Network Card Kit (795-099)

Morley DXc Network Card Kit, model 795-099is a dedicated communication interface designed to network Morley DXc analogue addressable fire alarm control panels. Supplied as a kit that includes the interface card and mounting fixings, the DXc Network Card enables peer-to-peer sharing of zones, keyboards and event information between multiple DXc panels. For installers and system designers working with DXc1, DXc2 and DXc4 panels, this small but essential accessory makes it straightforward to scale fire alarm systems across larger buildings or distributed sites while maintaining unified event visibility and control.

Key features at a glance

• Panel networking:Enables networking of Morley DXc panels (one card per panel).
• Peer-to-peer sharing:Panels on the network share zones, keyboards and events—supporting distributed control and monitoring.
• Compatibility:Designed for DXc1, DXc2 and DXc4 control panels.
• Compact kit:Fits to the left-hand side of the control panel on panel studs; fixing screws supplied.
• Scalability:DXc networks support combined systems up to a platform limit of 16 loops, allowing larger system coverage through multiple panels.

Detailed specifications and benefits

• Manufacturer:Honeywell (Morley-IAS)
• Manufacturer part number:795-099
• Product type:DXc Network Card / Communication Module
• Compatibility:Morley DXc1, DXc2, DXc4 panels
• Pack type:Kit (card + fixings)
• Typical system capability:Supports DXc network configurations up to 16 loops (platform limit)
• Mounting location:Left-hand side of control panel on panel studs
• Mounting fixings:Fixing screws supplied in kit
• Pack weight:0.02 kg
• Electrical consumption:INSufficient data — refer to manufacturer documentation for detailed power figures
• PCB / dimensions:INSufficient data — check product datasheet for physical dimensions and form factor
• Compliance / certification:INSufficient data — installers should verify CE/UKCA or local certification markings on supplied units and refer to Honeywell/Morley documentation

• Simplified system expansion:Rather than replacing a single control panel with a larger-capacity unit, the DXc Network Card Kit lets you expand coverage by joining panels, which is often faster and more cost-effective for phased projects.
• Distributed control and visibility:Peer-to-peer sharing means events and zone status from any networked panel are visible across the network—useful for security staff, building managers and fire response teams who need a holistic, real-time view.
• Reduced cabling and central point dependence:Networking panels allows separation of loops among panels while preserving centralized awareness, rather than routing all field devices back to a single central unit.
• Installer-friendly mounting:The card fits to panel studs on the left-hand side and includes fixings, reducing on-site preparation and simplifying retrofits.
• Cost-effective scaling:For many commercial and large premises, scaling with networked DXc panels and a simple interface card can be more economical than alternative expansion methods.

Use cases and scenarios where the DXc Network Card Kit excels

The DXc Network Card Kit is particularly valuable in installations where multiple control panels are desirable or necessary. Typical scenarios include:

• Large commercial buildings and multi-floor sites:Office towers, shopping centres and mixed-use buildings often require more than one control panel to manage numerous loops. Network cards let each panel control nearby loops while sharing events and keyboard access across the site.
• Campus and multi-building sites:Universities, hospitals and industrial parks with separate buildings can link DXc panels to provide a unified fire alarm picture without running all device wiring to a single central panel.
• Phased installations and upgrades:When expanding an existing system in stages, network cards allow newly installed panels to integrate seamlessly with the existing network—ideal for projects with budget or access constraints.
• Redundancy and distributed operation:In some designs, distributing control across networked panels improves fault tolerance—if one panel requires maintenance, others remain operational and events continue to be shared.
• Retrofits and constrained spaces:When space inside an existing enclosure is limited, adding a network card and a second panel elsewhere can be easier than reconfiguring an oversized central panel.

Comparisons with similar products and network approaches

When considering network options for addressable fire alarm systems, there are several approaches and competing modules to evaluate. Below are high-level comparisons to help identify where the Morley DXc Network Card Kit fits.

• Peer-to-peer (DXc network card):Panels share events and zone data directly with each other. This approach simplifies architecture by avoiding a single point of failure in terms of network logic and allows each panel to retain autonomous control of its loops while providing shared visibility.
• Master-slave or centralized networks:Some systems use a central controller or management server that aggregates data from subordinate panels. While centralized control can offer advanced management features, it may introduce a single point where a failure or communication loss can impact the entire system unless redundant servers are provided.

• OEM module advantages:The 795-099 is designed specifically for Morley DXc panels, ensuring compatibility, simpler commissioning and manufacturer support. Integration tends to be more straightforward because wiring, addressing and firmware expectations are aligned with the platform.
• Third-party or generic network modules:While there are generic communication interfaces, they can require additional configuration, bespoke wiring adapters or validation to meet certification requirements. For installations where certification traceability and manufacturer support matter, an OEM kit like the DXc Network Card is usually preferable.

• Cost-efficiency:The DXc Network Card Kit is a relatively low-cost add-on (suggested retail pricing positions it as an economical option compared with replacing or upgrading central panels) and saves on labour and downtime in many scenarios.
• Complexity:Networking panels introduces planning requirements—addressing, logical zone mapping and commissioning must be carefully managed. However, because the 795-099 is purpose-built for DXc panels, it tends to lower complexity versus custom integration approaches.

Customer testimonials and installer feedback

Official, verified customer reviews for part number 795-099 are not widely published in public retailer listings. However, installer and system integrator feedback gathered from field practices and common installer commentary highlights a few recurring themes:

• Ease of installation:Installers frequently note that the card’s form factor and supplied fixings make physical installation quick when panels are accessible.
• Reliable interoperability:Technicians value the certified compatibility with DXc1, DXc2 and DXc4 units—reducing commissioning surprises compared with generic modules.
• Practical for phased upgrades:Project managers appreciate being able to expand an existing system without wholesale panel replacement, thereby spreading costs across budget cycles.

Please note that these points reflect typical installer observations and best-practice experiences rather than verbatim public customer reviews. For documented case studies or formal testimonials, consult Honeywell / Morley-IAS sales literature or authorised distributors.

Conclusion: Why choose the Morley DXc Network Card Kit (795-099)?

The Morley DXc Network Card Kit (795-099) is a pragmatic and effective solution for organisations and contractors who need to network DXc control panels. It delivers targeted functionality—peer-to-peer sharing of zones, keyboards and events—without introducing excessive complexity or cost. Its OEM design ensures compatibility with DXc1, DXc2 and DXc4 panels and its compact kit format with supplied fixings streamlines onsite installation.

For large buildings, campuses, phased upgrades and installations where distributed panel control or redundancy is desired, the DXc Network Card Kit provides a straightforward path to scale up fire alarm systems while maintaining coherent monitoring and control. Where detailed electrical or dimensional data is required, installers should consult the official Honeywell/Morley DXc product documentation and local regulatory requirements. When balanced against alternatives, the 795-099 is often the best choice for DXc-based systems seeking reliable, supported networking capability.