Introduction to the HAY-PSUIP1X2A-12VDC and its key features
HAY-PSUIP1X2A-12VDCis a compact, weatherproof AC→DC power supply designed for outdoor low-voltage equipment. Encased in a grey polycarbonate housing with an IP66 rating, it accepts a wide mains input (100–240 VAC, 50/60 Hz) and delivers a regulated 12 V DC output up to 2 A (24 W). Built-in protections such as a 3 A main input fuse, an auto‑reset PTC output fuse (≈2.5 A) and surge protection make it a dependable choice for powering outdoor CCTV cameras, PTZ heads, gate controllers and other outdoor devices where exposure to dust and heavy rain is a concern.
This unit’s small footprint (approximately 80 × 150 × 71 mm) and light weight (~0.5 kg) make it easy to mount near equipment or within equipment enclosures, and its broad input voltage range suits international installations.
- Single 12 V DC output, 2 A (24 W)
- IP66-rated polycarbonate enclosure for reliable outdoor use
- Wide AC input: 100–240 VAC, 50/60 Hz
- Input protection: 3 A main fuse
- Output protection: auto‑reset PTC (~2.5 A)
- Built-in surge protection suitable for typical outdoor installations
- Compact and lightweight for flexible mounting
The suggested retail price is A334.99, positioning the HAY-PSUIP1X2A-12VDC as an affordable, entry-to-mid-level outdoor PSU for installers and system integrators who need weatherproof, reliable power without the cost of larger industrial supplies.
Detailed specifications and benefits
Understanding what sits behind the HAY-PSUIP1X2A-12VDC specifications helps explain why it’s suited to many outdoor low-voltage power tasks. Below are the key technical details followed by practical benefits.
- Model:HAY-PSUIP1X2A-12VDC
- Input voltage:100 60 6000 VAC, 50/60 Hz
- Input fuse:3 A (main)
- Output voltage:12 V DC
- Output current:2 A (24 W)
- Output protection:Auto-reset PTC (~2.5 A)
- Surge protection:Yes (built-in)
Benefits:The wide input range (100–240 VAC) makes the unit suitable for installations worldwide without voltage conversion. The regulated 12 V output is stable for sensitive electronics like cameras, while the 2 A rating provides enough headroom for many single-camera and access-control devices. Input and output protection reduce risk from short circuits and transient spikes, helping to protect both the supply and the connected device.
- Enclosure material:Grey polycarbonate
- IP rating:IP66 (when correctly installed)
- Dimensions (WD):80 150 71 mm
- Weight:≈0.5 kg
Benefits:Polycarbonate enclosures balance durability and cost—resistant to impact and UV while lighter than metal. IP66 rating indicates strong protection against powerful water jets and dust ingress when the unit is installed and sealed correctly, which is ideal for exposed locations such as camera poles and gate pillars.
- Operating temperature:6 6 6 6 40
- Storage temperature:6 6 6 60
- Humidity:0 65% RH non-condensing
Benefits:Suitable for most temperate outdoor environments encountered for CCTV and access-control equipment. The humidity tolerance and storage range help ensure reliable long-term performance when deployed in non-extreme climates.
Use cases and scenarios where this product excels
The HAY-PSUIP1X2A-12VDC is purpose-built for outdoor low-voltage power delivery. Typical applications include:
- Outdoor CCTV cameras and PTZ heads:Ideal for fixed cameras or smaller PTZ units that draw under 2 A. The waterproof enclosure allows the supply to be mounted close to the camera, reducing cable runs and loss.
- Gate controllers and access control equipment:Many gate motors and access panels require a stable 12 V supply for control electronics; the weatherproof housing enables placement at gate pillars or nearby posts.
- Remote sensors and alarm peripherals:Suitable for powering outdoor sensors, sirens or triggers that need 12 V and modest current.
- Outdoor network devices (non-PoE):For devices that require local DC power rather than PoE—such as some wireless bridges or small controllers—this unit provides a convenient, sealed supply.
Because it’s compact and protected against heavy sprays and dust, the HAY-PSUIP1X2A-12VDC is particularly useful in pole-mounted and exposed installations where a sheltered indoor supply is not practical.
Comparisons with similar products in the market
When choosing an outdoor power supply, key differentiators are enclosure material, ingress protection rating, output capacity and built-in protections. Here’s how the HAY-PSUIP1X2A-12VDC compares in those areas:
- Enclosure material (polycarbonate vs metal):Polycarbonate enclosures as used here are lightweight, corrosion-resistant and generally cheaper than metal boxes. Metal enclosures can offer better EMI shielding and higher mechanical strength, but may require corrosion protection in coastal environments.
- IP rating (IP66 vs IP65/IP67):IP66 provides high protection against powerful water jets and dust; IP65 is slightly lower (protected against water jets but not high pressure), while IP67 adds temporary immersion protection. If installations risk submersion (e.g., pit-mounted equipment), an IP67-rated unit would be preferable—but for most pole- and wall-mounted CCTV applications, IP66 is sufficient.
- Output capacity (2 A vs higher current models):A 2 A, 24 W output suits single cameras and small devices. For multi-camera feeds, high-power PTZs with heaters or wipers, or devices with motorized components, larger 3 A–10 A supplies or multiple supplies will be needed. Choosing the right size prevents overload and frequent PTC trips.
- Indoor DIN-rail power supplies vs sealed outdoor supplies:Indoor DIN-rail supplies are often more efficient and offer higher power density, but they must be installed in weatherproof cabinets. The HAY unit’s integrated sealed enclosure removes the need for additional housings, saving installation complexity and cost.
- PoE alternatives:For IP cameras that accept Power over Ethernet, PoE injectors or switches simplify cabling by combining data and power. However, PoE is not universally supported and PoE devices may require different infrastructure. The HAY unit remains relevant where 12 V DC is required or PoE is not available.
Choose the HAY-PSUIP1X2A-12VDC when you need a simple, affordable, weatherproof 12 V supply close to a single outdoor device, and when IP66 protection is adequate for the environment. Consider higher IP ratings, metal enclosures or higher current supplies when the environment or load demands it.
Customer testimonials and typical feedback
There are no verified customer reviews included with the product data provided. Based on the products specifications and typical installer experience with similar units, common feedback themes would likely include:
- Positive:Installers often appreciate the ease of mounting, compact size and reliable weatherproofing—especially when it eliminates the need for an extra enclosure. The built-in surge protection and auto-reset PTC are commonly noted as useful safeguards in outdoor installations.
- Constructive:Some users may find the 2 A limit restrictive for high-draw PTZ cameras or setups with heaters, and they may prefer a higher-current model for future-proofing. Others in harsh coastal or industrial settings may request metal enclosures for added durability.
If you need objective customer feedback, ask suppliers for site references or check integration forums where installers discuss field performance of similarly specified outdoor PSUs.
- Professional installation:Install in accordance with local electrical regulations; installation by a qualified electrician is recommended.
- Load limits:Do not exceed the rated 2 A output; verify the connected devices current draw and allow margin for inrush currents (motors, heaters, IR illuminators).
- IP66 considerations:The IP66 rating applies only when the unit is correctly installed and sealed; avoid submerging the unit and check cable glands and seals after installation.
- Surge protection:Built-in surge protection helps but does not replace site-level lightning protection on exposed sites—consider additional surge arrestors where lightning risk exists.
- Warranty:No warranty information is provided in the supplied data. Confirm warranty terms with the supplier or manufacturer before purchase.
Conclusion: why the HAY-PSUIP1X2A-12VDC is a great choice
The HAY-PSUIP1X2A-12VDC combines practical features—regulated 12 V DC output, IP66 weatherproofing, surge protection and compact polycarbonate packaging—into an affordable package for outdoor low-voltage power. Its particularly well-suited for single-camera CCTV installations, gate controllers and other outdoor devices that require a stable 12 V supply but do not demand high current capacity.
For installers seeking a simple, cost-effective outdoor power solution that reduces cable runs and the need for extra enclosures, this unit represents good value at its suggested price point. Just ensure the 2 A rating matches your load requirements and confirm warranty and certification details with your supplier if those are critical to your project.
Bottom line:If you need a reliable, weatherproof 12 V DC supply for a single outdoor device and value compactness and protection over high current capacity, the HAY-PSUIP1X2A-12VDC is a practical and economical option.
