Introduction to the Texecom DBE-0002 and its key features
The Texecom DBE-0002 is a purpose-built plastic flush-mount back box designed for use with Texecom Premier Elite FMK flush-mounted keypads. If you install alarm keypads into dry-lined or cavity walls, the DBE-0002 provides a clean, recessed mounting solution that keeps the finished look neat and professional. Lightweight and non-conductive, this back box includes punch/knock-out holes to simplify cable entry and trunking, and it is sized specifically to accept Premier Elite FMK keypads.
Key features at a glance:
- Compatibility:Designed for Texecom Premier Elite FMK flush-mount keypads
- Material:Lightweight plastic, non-conductive
- Mounting:Flush-mount suitable for dry-lining / cavity walls
- Cable entry:Punch/knock-out holes for neat trunking
- Dimensions:110 × 154 × 30 mm (H × W × D)
Detailed description of the product's specifications and benefits
The DBE-0002 is model-coded for easy identification and is explicitly compatible with Premier Elite FMK keypads. As a mechanical mounting accessory rather than an electronic component, it focuses on providing the correct physical support and finish for the keypad rather than interfacing with the alarm electronics.
The unit measures 110 mm high by 154 mm wide and 30 mm deep. This slim depth is ideal for typical dry-lining and cavity wall installations where space behind the plasterboard or lining is limited. The dimensioning is matched to the FMK keypad form factor so that when the keypad is fitted into the box the finished faceplate sits flush with the wall for a tidy appearance.
Constructed from lightweight plastic, the DBE-0002 is non-conductive. This reduces the risk of accidental shorting of cables during installation and provides an electrically neutral mounting surface for the keypad. Plastic also keeps weight and cost down compared with metal alternatives, while still delivering adequate durability for indoor installations.
Punch and knock-out holes are provided for cable entry so installers can create neat trunking routes and avoid exposed cable bends or crimps. These entries help keep installation times down and support a professional finish. Because this back box is designed specifically for the FMK keypad family, the layout of the knock-outs and internal clearance is intended to accommodate typical alarm wiring runs and the keypad’s connector positions.
- Neat, flush finish:Offers a clean recessed fit that is visually discreet and professional in appearance.
- Time-saving:Pre-formed knock-outs and keypad-specific sizing cut down on on-site modification and measuring.
- Non-conductive mounting:Reduces electrical risk during wiring and avoids contact with metal that might need insulation.
- Cost effective:As a simple mechanical accessory, the back box provides a low-cost route to a high-quality finish; suggested retail positioning is competitive with other specialist mounting accessories.
- Installer friendly:Designed with the installer workflow in mind—easy to position in thin cavity walls and compatible with standard dry-lining techniques.
Use cases and scenarios where the product excels
The DBE-0002 is suited to a wide variety of installation contexts. It is particularly strong where a discreet flush finish and space-conscious mounting are priorities.
In new-build homes or renovation projects where alarm keypads need to be unobtrusively integrated into interior walls, the DBE-0002 allows the keypad to sit flush with plasterboard and avoids boxed-out surface trunking. This is popular in hallways, utility rooms, and living spaces where aesthetics matter.
Offices, small retail units, and warehouses that use Texecom Premier Elite systems can benefit from the DBE-0002’s neat finish. When multiple keypads are installed across a site, consistent recessed mounting gives a more professional appearance and simplifies maintenance.
When replacing surface-mounted keypads or upgrading alarm systems in properties with thin cavity walls, the DBE-0002’s slim 30 mm depth makes it suitable for retrofits where wall depth is limited. Its knock-outs allow routing behind the plaster without major chase work.
Projects that require components to meet manufacturer guidelines—such as property management schemes or insurance-backed installations—benefit from using an accessory specifically designed for the FMK keypad family. Using the Texecom back box reduces the chance of fitting issues and supports compliance with the keypad manufacturer’s installation guidance.
Comparisons with similar products in the market
Back boxes for alarm keypads come in a few basic types: manufacturer-specific plastic boxes, universal plastic boxes, and metal boxes. Each option has trade-offs.
- Manufacturer-specific plastic boxes (like DBE-0002):Pros—perfect fit for the intended keypad, knock-outs aligned to keypad connectors, generally quick to fit and inexpensive. Cons—limited versatility if you later swap to a different keypad model.
- Universal plastic boxes:Pros—can accommodate a range of keypads and sometimes offer extra depth or mounting slots. Cons—may require adaptation to fit a specific keypad precisely, potentially leaving gaps or requiring additional trims for a tidy finish.
- Metal back boxes:Pros—more robust and can provide better grounding options for certain applications. Cons—heavier, more expensive, can require additional insulation to prevent shorting, and may be overkill for simple indoor keypad installations.
Compared with universal boxes, the DBE-0002’s keypad-specific design reduces on-site adjustments and ensures a consistent face alignment. Compared with metal boxes, the DBE-0002 is lighter, cheaper, and avoids conductive concerns—advantages for standard interior installations where extra mechanical protection is not required.
One limitation to note is the 30 mm depth: if installers anticipate large cable bundles, batteries, or ancillary modules behind the keypad, a deeper back box or surface-mounted enclosure might be required. Additionally, some competitive products offer multiple colours or finishes; colour information for the DBE-0002 is listed as insufficient data, so if a visible colour match is critical you should confirm availability before ordering.
Customer testimonials and installer feedback
There are no official customer review excerpts supplied with this product listing. However, based on common installer experience with similar manufacturer-specific flush back boxes, the typical feedback themes are useful to consider:
- Ease of installation:Installers commonly report that manufacturer-specific boxes fit the keypad housings precisely, reducing trimming and alignment work on site.
- Neat finish:A flush-mount back box typically delivers a cleaner look than surface-mounted alternatives, which is frequently cited as a positive by both installers and homeowners.
- Cable routing convenience:Punch-out knock-outs that are properly positioned for the keypad’s connectors save time and reduce the chance of cable strain.
- Value:Many tradespeople prefer a low-cost, purpose-made plastic box when the installation environment does not demand heavy-duty metal enclosures.
If you require verified customer reviews, consider checking supplier websites, trade forums, or contacting installers who have worked with Premier Elite FMK keypads to gather first-hand experiences.
Conclusion: Why the Texecom DBE-0002 is a good choice
The Texecom DBE-0002 flush-mount back box is a practical, low-cost accessory tailored to the Premier Elite FMK keypad range. For any installation where a neat recessed finish is preferred—especially in dry-lining and cavity wall scenarios—the DBE-0002 simplifies the process and produces professional results. Its punch/knock-out holes and precise dimensions mean less on-site modification, and its non-conductive plastic construction reduces wiring risk during installation.
While deeper or metal boxes may be needed for specialist applications that demand extra space or mechanical protection, the DBE-0002 hits the sweet spot for most domestic and light-commercial keypad installations. If you specify or fit Texecom Premier Elite FMK keypads, using the DBE-0002 makes practical sense: it’s designed to match the keypad, streamline installation, and deliver a tidy, inconspicuous finish.
For installers selecting parts, the DBE-0002 provides a purpose-built mounting solution that balances price, convenience, and finish quality. For homeowners and specifiers, it keeps the aesthetic disruption minimal while meeting the practical needs of a secure, correctly mounted keypad. As always, installers should follow Texecom’s installation guidance and applicable UK wiring regulations, and consult a qualified installer if in doubt.
