Introduction to the Texecom Premier Impaq Glass-Break Detector
Texecom Premier Impaq Glass-Break Detector (AEC-0001)is a wired digital acoustic glass-break detector designed for perimeter protection of windows and glazed doors in domestic and small commercial intruder alarm systems. Combining microprocessor-based digital signal processing (DSP) with Texecom's Digital Flex Detection logic, the Premier Impaq aims to accurately detect genuine glass-break events while minimising false alarms caused by common environmental noises.
Compact and unobtrusive, the AEC-0001 offers up to 9 m of coverage with a wide 170° field of view and selectable glass-type profiles. It is intended for professional installations or competent DIY users who follow local wiring standards and Texecom's installation guidance.
Key Features at a Glance
- Quad-frequency DSP for improved false-alarm immunity.
- Digital Flex Detection: requires a low-frequency flex pressure wave followed by a shatter signal to trigger an alarm.
- Selectable glass profiles for plate/tempered or laminated/wired glass.
- Coverage: up to 9 m range and 170° field of view; minimum recommended window size 300 × 300 mm.
- Adjustable sensitivity, test/verification modes and dual-LED indication. Supports latch and first-to-alarm inputs.
Detailed Specifications and Benefits
Understanding the technical details makes it easier to see where the Premier Impaq is best applied. Below is a detailed description of its primary specifications and the practical benefits they deliver.
- Supply voltage: 9–16 V DC. This voltage range is standard for many wired intruder alarm systems and ensures compatibility with common alarm control panels.
- Current consumption: approximately 11 mA in standby and around 10 mA during alarm. Low current draw helps preserve any auxiliary power budgets in larger systems.
- Alarm relay output: NC contact, rated under 24 V DC and 50 mA, with 18 Ω resistance. This allows direct interfacing to many alarm control systems that accept conventional detector inputs.
- Sensor type: extended response electret microphone — sensitive to both the pressure wave and the shattering sound that accompany glass breakage.
- Detection method: Quad-frequency DSP combined with Digital Flex Detection. The DSP continuously analyses incoming signals across multiple frequency bands to distinguish real shatter events from transient or tonal noises. Digital Flex Detection requires a low-frequency flex (pressure) wave followed by a high-frequency shatter signature before the detector registers an alarm. This two-stage confirmation dramatically reduces false alarms from loud noises that lack the pressure wave component.
- Glass types supported: selectable profiles for plate/tempered and laminated/wired glass, increasing detection accuracy for different glazing constructions.
- Range and coverage: up to 9 m range, 170° field of view, with minimum window size of 300 × 300 mm. Glass thickness supported is 2.4–6.4 mm.
- Operating temperature: −10 °C to +55 °C (14 °F to 131 °F), suitable for most indoor environments.
- Dimensions: 87 mm × 62 mm × 26 mm — compact enough for discreet wall, corner or ceiling mounting.
- Packed weight: approximately 70 g, making it lightweight and easy to handle during installation.
- Texecom lists the device as Grade 2 and notes compliance with relevant EN/European EMC standards where specified. Grade 2 listing makes it suitable for many residential and small commercial applications that require a moderate level of security robustness.
- Power must be isolated before installation and the detector should be tested after fitting to confirm coverage and operation. Professional installation by a trained alarm engineer is recommended for compliance and to ensure optimum performance.
Why the Detection Approach Matters
Traditional acoustic glass-break sensors often rely on single-parameter thresholds that can be triggered by loud bangs, dropped items or HVAC system surges. The Premier Impaq’s two-stage detection logic — combining a low-frequency flex detection with quad-frequency DSP analysis of the shatter signature — reduces these false triggers while preserving sensitivity to genuine break-ins. For end-users, this means fewer nuisance alarms and greater trust in the alarm system’s reliability.
Use Cases and Scenarios Where the Premier Impaq Excels
The AEC-0001 is particularly well suited to situations that require dependable window and glazed door protection without the complexity of vibration-contact sensors or peripheral acoustic systems. Examples include:
- Residential homes: protecting ground-floor and accessible windows where a fast, reliable alert from the alarm panel is required.
- Small retail premises and offices: safeguarding display windows and glazed entrances that are attractive to opportunistic intruders.
- Conservatories and sunrooms: where glass surfaces are abundant and a discreet, mounted detector provides broad coverage.
- Mixed systems: integrating into wired alarm systems that combine motion detectors, magnetic contacts and glass-break detection to create layered perimeter security.
Because the device is wired and grades as Texecom Grade 2, it is often chosen for installations where a compromise between cost and robustness is required — stronger than basic consumer-grade sensors but less complex than higher-grade commercial systems.
Comparisons with Similar Products on the Market
The market for glass-break detection includes acoustic-only sensors, combined acoustic-and-vibration devices, and contact-based shock sensors that mount directly to glass. Compared with simple acoustic detectors, the Premier Impaq’s DSP and Digital Flex Detection provide superior immunity to false alarms from non-break sounds. Versus shock/contact sensors, acoustic detectors like the AEC-0001 don’t require direct attachment to the glass surface and can cover larger areas from wall or ceiling mounts.
Relative to wireless glass-break detectors, a wired device offers certain advantages: consistent power, no battery replacements, and a reliable connection to the control panel. However, wired detectors require cable runs and are therefore more labour-intensive to install. For installers and site owners who prioritise reliability and integration with wired systems, the AEC-0001 is a compelling option.
Customer Feedback and Reviews
Official customer testimonials specific to the Premier Impaq AEC-0001 are not included here. However, feedback from professional installers and security integrators for Texecom’s Premier Impaq range typically highlights:
- Strong false-alarm rejection when set up correctly, thanks to DSP and Digital Flex Detection.
- Good coverage and ease of positioning due to the wide field of view.
- Reliability in wired systems where continuous power and stable signalling are important.
As with all acoustic detectors, installers emphasise correct placement, appropriate sensitivity settings and testing to ensure optimum real-world performance.
Conclusion: Why the Premier Impaq Is a Great Choice
The Texecom Premier Impaq Glass-Break Detector (AEC-0001) brings a measured balance of sensitivity, false-alarm immunity and installation practicality to perimeter security. Its digital quad-frequency DSP combined with Digital Flex Detection provides a robust approach to distinguishing real glass-break events from innocuous noises. With selectable glass-type profiles, adjustable sensitivity and a wide coverage area of up to 9 m and 170°, it fits many residential and small commercial scenarios.
For installers and system designers who need a reliable wired glass-break detector that integrates cleanly into existing alarm panels and offers Grade 2 listing, the Premier Impaq is a dependable choice. Proper installation and commissioning are key to maximising its advantages, and prospective buyers should consult Texecom’s datasheet and professional installers to ensure correct siting and configuration.
In short: if you want wired glass-break protection that prioritises accurate detection and low nuisance alarms, the Premier Impaq AEC-0001 is worth strong consideration.
