Introduction to the Texecom Veritas R8 Replacement PCB (CFC-0002)
The Texecom Veritas R8 Replacement PCB (CFC-0002, also listed by some distributors as ITM004219) is an OEM spare part designed to restore the control and logic functions of a Veritas R8 intruder alarm panel without the expense and disruption of replacing the entire enclosure. Targeted at installers and maintenance engineers, this replacement printed circuit board is a direct-fit component for the Veritas R8 8-zone panel family. It offers a cost-effective route to repair, supports compliance with the panels specifications, and preserves existing wiring and peripherals when correctly installed.
Key features at a glance
- Genuine Texecom part:Manufacturer part number CFC-0002 (Distributor: ITM004219).
- Direct fit:Designed to mount into the original Veritas R8 enclosure and interface with the existing connectors and peripherals.
- Compliance:RoHS compliant and intended for Veritas R8 systems adhering to PD6662:2017 Grade 1 Class II.
- Pack information:EAN 65352202003; approximate packed weight ~0.5 kg.
- Cost-effective repair:Replace the faulty PCB rather than the full panel to save time and money.
Detailed specifications and benefits
The Veritas R8 replacement PCB is supplied as a board-only spare intended for use by qualified installers. It carries the Texecom manufacturer identity and is listed under part number CFC-0002. Distributors may also reference the same item as ITM004219. The board is RoHS compliant and designed to meet the mechanical and electrical fitment needs of the Veritas R8 8-zone control panel family.
- Manufacturer:Texecom
- Manufacturer part number:CFC-0002
- Distributor / ITM:ITM004219
- EAN:65352202003
- Product type:Replacement PCB / Control panel spare
- Supported device:Texecom Veritas R8 (8-zone family)
- Fitment:Designed to fit original Veritas R8 enclosure
- Panel spec:PD6662:2017 Grade 1 Class II
- Compliance:RoHS compliant
- Approximate weight:0.5 kg
- Dimensions:Insufficient public data (Refer to installed panel for physical constraints)
- Documentation:No standalone PCB datasheet publicly available; consult the Veritas R8 installer manual for wiring and configuration.
- Cost savings:Replacing the PCB is typically less expensive than replacing a complete panel, making it attractive for trade customers and long-term maintenance planning.
- Time efficiency:Swapping a PCB can be faster than full panel replacement and reconfiguration if the enclosure, peripherals and wiring are sound.
- System continuity:Retains existing keypads, sensors, sirens, and cabling, minimizing disruption to the protected environment.
- OEM reliability:As a Texecom-manufactured part, it maintains manufacturer compatibility and reduces integration risk compared to third-party alternatives.
- Regulatory alignment:Designed for systems conforming to PD6662:2017 Grade 1 Class II, helping ensure that repairs remain within the panels designed performance and compliance envelope.
Use cases and scenarios where the product excels
The Veritas R8 Replacement PCB suits a range of practical situations common in security system maintenance and installation:
When a Veritas R8 panel ceases to function correctly due to a defective main PCB, replacing the board restores control logic, zones and system responses without disturbing installed devices. For example, a residential or small commercial site facing intermittent faults, false alarms tied to PCB faults, or a non-booting panel can often be returned to service quickly by fitting a new PCB.
Service providers and installers under ongoing maintenance contracts can reduce equipment replacement costs by stocking a replacement PCB. For sites where the enclosure and peripherals are in good condition, swapping the PCB reduces parts cost and on-site labour compared with full system replacement.
In situations where incremental upgrades are needed, replacing the PCB can be part of a staged refresh program. If only the controller is compromised or outdated, a new OEM PCB lets the rest of the ecosystem remain intact while modernising the core logic.
For critical installations where alarm downtime carries high risk (retail premises, healthcare, small data centres), having an OEM board available for rapid swap-out can significantly reduce recovery time and potential security exposure.
Comparisons with similar products and replacement options
When considering repair or replacement options for a Veritas R8 panel, there are several alternatives. Below is a practical comparison to help inform a choice:
- OEM Replacement PCB (CFC-0002) vs Full Panel Replacement:Cost: PCB replacement is typically less expensive than replacing the entire panel and re-installing all peripherals.Time: PCB swap is typically faster and causes minimal re-wiring and re-commissioning.Risk: Full panel replacement may be necessary if the enclosure or peripherals are incompatible or physically damaged; otherwise, OEM PCB is preferred.
- OEM PCB vs Third-Party or Generic Control Boards:Compatibility: An OEM board is guaranteed to match the Veritas R8 form factor and specifications; generic boards may require modifications or offer reduced functionality.Support and documentation: Texecom parts work within the established documentation ecosystem; third-party boards may lack clear guidance for integration and compliance.Longevity: Using OEM spares is more likely to preserve warranty and meets expected lifecycle performance.
- New panel purchase vs Refurbished or Used PCBs:Reliability: New OEM PCBs offer predictable performance; used parts may carry undetected faults.Warranty: New parts from authorised resellers typically include a limited trade warranty (terms vary), whereas used components are often sold without meaningful cover.
Customer testimonials and installer feedback
There are no widely published customer reviews specific to the CFC-0002 replacement PCB available in public consumer review platforms. That said, typical feedback from professional installers and maintenance engineers for OEM replacement PCBs in the Veritas family tends to emphasize the following points:
- Reliability:Installers report that OEM boards reliably restore system function when diagnostics point to a PCB fault.
- Simplicity of swap:The direct-fit nature means less time on-site compared with panel replacement, reducing disruption to clients.
- Documentation dependency:Successful replacement relies on following the Veritas R8 installer manual for wiring and configuration, since there is no standalone PCB datasheet publicly available.
If you need verified customer reviews, check with your chosen distributor or reseller for trade references, case studies, or feedback from other installers who have purchased the part.
Installation guidance and important disclaimers
Safety and compliance are critical when working on alarm systems. Key guidance includes:
- Replacement should be performed by a qualified alarm engineer or competent installer.
- Before replacing the PCB, isolate all power sources including mains and battery supply.
- Follow the Texecom Veritas R8 installation manual for wiring, configuration and commissioning guidance; the PCB itself does not have a publicly published pinout datasheet.
- Check warranty terms with the supplier; warranty coverage for this item varies by reseller and is typically a limited trade warranty rather than a consumer guarantee.
- This item is compatible only with Texecom Veritas R8 systems. Ensure compatibility before purchase to avoid unnecessary returns or system incompatibility issues.
Conclusion: Why choose the Texecom Veritas R8 Replacement PCB CFC-0002?
For installers and maintenance teams managing Veritas R8 alarm installations, the Texecom CFC-0002 replacement PCB is a practical, cost-effective option to restore system function without replacing an entire panel. Its status as an OEM part preserves compatibility and reduces integration risk. The boards direct-fit design, compliance alignment with PD6662:2017 Grade 1 Class II, and the ability to keep existing peripherals in place make it an attractive choice when the main PCB is identified as the fault source.
Ultimately, the decision to use this replacement PCB should be informed by a proper fault diagnosis, adherence to Texecom installation guidance, and an understanding of warranty and compliance considerations. When those conditions are met, opting to replace the PCB CFC-0002 can save time, reduce costs, and quickly return a Veritas R8 system to reliable operation.
