Introduction to the Haydon HAY-METRO-POE and its key features
Haydon HAY-METRO-POEis a purpose-built, cable-managed outdoor CCTV camera housing with an integrated IEEE 802.3at (PoE+) splitter. Designed to simplify outdoor surveillance installs, this die-cast aluminium enclosure combines weatherproof protection (IP67), tidy cable routing and an internal PoE splitter that converts 52 6–57 V DC delivered over Ethernet into selectable low-voltage outputs (12 V DC or 24 V DC). With selectable outputs, Gigabit pass-through data, and a three-year anti-corrosion warranty, the HAY-METRO-POE is aimed at installers and system designers who want a compact, durable solution when a local mains supply is inconvenient or unavailable.
Detailed description of specifications and benefits
The core differentiator for the HAY-METRO-POE is the built-in IEEE 802.3at (PoE+) splitter that accepts 52 6–57 V DC over the RJ-45 connection and provides selectable low-voltage outputs: 12 V DC at 2 A or 24 V DC at 1 A. This makes it possible to power most IP cameras and modest heaters directly from PoE sources without running a separate mains feed to the camera location. The housing also supports passive 10/100/1000 Mbps duplex data pass-through, so network throughput is maintained and Gigabit-capable cameras can run at full speed. The rated maximum PoE distance is up to 100 m using standard Ethernet cabling, consistent with typical PoE deployments.
Constructed from die-cast aluminium, the HAY-METRO-POE is built for long-term outdoor exposure. The housing features a fully cable-managed interior with a quick-release removable top and a side opening for straightforward cable routing and maintenance access. The unit carries an IP67 ingress protection rating, which protects against dust ingress and immersion, making it suitable for many outdoor and exposed locations. Haydon backs the housing with a three-year anti-corrosion warranty, reinforcing the products suitability for coastal and industrial environments where corrosion can be an issue.
On the network side, the HAY-METRO-POE provides passive Gigabit data support, ensuring no bottleneck for high-resolution cameras or bandwidth-hungry analytic functions. The internal splitter reduces install complexity by removing the need for a local AC supply at the camera, decreasing the number of separate components, junction boxes and potential failure points. For installers this translates into faster deployments, fewer cable types at the mounting point and lower ongoing maintenance overhead.
While the HAY-METRO-POE is versatile, it has practical limits. The selectable outputs (12 VDC @ 2 A or 24 VDC @ 1 A) are suitable for many cameras and small heaters but are not designed for high-current devices such as large PTZ units or heavy-duty heaters that require more than the available current. The product datasheet also does not provide detailed physical dimensions or weight in the provided materials, so installers should confirm mounting space and mechanical compatibility with the manufacturer or authorised distributor before purchasing.
Use cases and scenarios where the product excels
- Remote camera locations without mains power:The integrated PoE splitter allows cameras and small heaters to be powered solely from PoE+, ideal for poles, outbuildings and remote entry points where bringing an AC feed would be expensive or impractical.
- Coastal or industrial sites:The die-cast aluminium construction and three-year anti-corrosion warranty make the housing a strong candidate for salt-air or corrosive industrial environments.
- Retail and campus CCTV upgrades:For sites migrating to IP cameras, the HAY-METRO-POE streamlines retrofits by containing power conversion and cable management in a single unit, allowing installers to replace analogue housings with minimal wiring changes.
- Compact installations needing clean cable routing:The quick-release top and side-opening cable management reduce time on-site and produce a tidy, tamper-resistant installation that helps reduce accidental cable damage and simplifies ongoing maintenance.
- Temporary or mobile deployments:When a temporary camera needs to be deployed quickly (event security, construction site monitoring), the all-in-one housing with PoE power reduces required equipment, enabling faster turnaround.
Comparisons with similar products on the market
Integrated PoE housing solutions are increasingly common as installers seek simpler deployments. Comparing the HAY-METRO-POE with alternatives highlights several advantages and trade-offs.
Using a separate PoE splitter and a generic IP67 housing can achieve similar functionality, but the integrated HAY-METRO-POE reduces the number of components, simplifies cable routing and reduces internal clutter. A single purpose-built enclosure typically offers better fit-and-finish, fewer cable penetrations and a faster install than combining multiple parts. Conversely, separate components can be more flexible if non-standard power outputs or larger splitters are required.
Some competing housings also provide integrated power conversion and environmental protection. The HAY-METRO-POE stands out for its Gigabit passive data pass-through and selectable voltage outputs that suit a wide range of camera models. However, other products may offer higher output current or native support for multiple voltage options and are sometimes rated for higher-power devices. The key decision point is whether the HAY-METRO-POEs 12 V/24 V selectable output and current limits match the specific camera and heater requirements.
PoE extenders and midspan injectors are used to extend cabling or add power where switches lack PoE. The HAY-METRO-POE is complementary to these devices: you would still need a PoE+ source (switch or injector) upstream if the switch does not supply PoE+. The advantage of the HAY-METRO-POE is the localized power-conversion and housing solution at the camera point, whereas extenders and injectors remain in-line network equipment rather than a camera mount solution.
Customer testimonials and installer feedback
At the time of writing, there were no widely published, attributable customer reviews included in the manufacturers datasheet. However, typical installer feedback for integrated PoE housings and splitters aligns with the following representative points observed in field reports and installer forums:
- "Installation time was noticeably reduced Installers frequently report that combining the enclosure and splitter into a single product eliminates an extra junction box and wiring step, saving time on-site.
- "Neat cable management and durability Die-cast housings with IP67 rating are praised for producing tidy, weatherproof installs that are easier to maintain and less prone to corrosion in coastal sites.
- "Watch the power budget Installers note the importance of checking camera and heater current draw against the housings selectable output limits to avoid underspecifying the power supply.
These representative observations reflect how the HAY-METRO-POE is commonly used in the field and what installers consider most valuable: reliability, tidy cabling and reduced reliance on local mains power.
Conclusion: Why the HAY-METRO-POE is a strong choice
For installations that require a durable, weatherproof camera housing and simplified powering from PoE+, the Haydon HAY-METRO-POE provides a compelling, purpose-built solution. Its integrated IEEE 802.3at splitter with selectable 12 VDC or 24 VDC outputs removes the need for local mains when powering cameras and modest heaters, while the passive Gigabit data pass-through preserves network performance. The die-cast aluminium construction, IP67 rating and three-year anti-corrosion warranty make it well suited to coastal, industrial and exposed outdoor sites.
That said, installers should confirm device power requirements against the housings output limits (12 V @ 2 A or 24 V @ 1 A) and verify physical dimensions with the manufacturer if mounting space is critical. When deployed in appropriate applications, the HAY-METRO-POE reduces complexity, saves install time and produces tidy, resilient camera installsmaking it an excellent option for contractors and experienced DIYers alike.
- Product:Haydon HAY-METRO-POE Cable-managed CCTV housing with PoE splitter (SKU ITM005185)
- Price guidance:Suggested price 169.99 (cost price 139.16)
- Key specs:IEEE 802.3at PoE+ splitter; selectable 12 VDC @ 2 A or 24 VDC @ 1 A; passive Gigabit 10/100/1000 Mbps; IP67; die-cast aluminium; 3-year anti-corrosion warranty
- Good fit for:Outdoor IP camera installs without local mains, coastal/industrial sites, retrofit projects
If you plan to specify the HAY-METRO-POE, consult the manufacturers datasheet and authorised distributor for the latest technical details, confirm mounting dimensions and ensure the upstream PoE source meets IEEE 802.3at (PoE+) requirements.
