RG-CS83-24GT4XS 24-Port Gigabit L3 Managed Switch, 4x SFP+ (1/10G), Fanless 1U

Introduction: RG-CS83-24GT4XS at a glance

RG-CS83-24GT4XS 24-Port Gigabit L3 Managed Switch, 4x SFP+ (1/10G), Fanless 1Uis a compact, cloud-ready Layer‑3 access switch designed for campus and mid‑size enterprise LANs. With 24 gigabit RJ45 access ports and four SFP+ uplinks(1G/10G), the RG-CS83-24GT4XS combines high‑capacity aggregation, advanced routing and flexible management through Ruijie RGOS. The non‑PoE, fanless 1U form factor makes it suitable for quiet environments while delivering the core L2/L3 features network teams expect: VLANs, OSPF/RIP, VRF, ACLs, QoS and device virtualisation (VSU). Suggested retail pricing for this SKU is US$599.00 (cost price: US$506.50); PoE variants are available under different suffixes.

Key features in brief

• 24 x 10/100/1000BASE‑T RJ45 access ports for end‑device connectivity.
• 4 x SFP+ uplinks supporting 1G and 10G modules for flexible aggregation.
• Layer‑3 routing features (OSPF, RIP, static routes, VRF) plus comprehensive L2 capabilities (4,000 VLANs, 802.1Q).
• Cloud and local management via Ruijie RGOS, with SON and zero‑touch provisioning for simplified deployment and monitoring.
• Fanless (non‑PoE) design for quiet operation; PoE models are available if power delivery to endpoints is required.
• Compact 1U rackmount form factor with a switching capacity of 128 Gbps and forwarding rate of 96 Mpps.

Detailed specifications and benefits

The RG-CS83-24GT4XS packs a useful combination of hardware and software suited to access-layer roles:

• Ports:24 gigabit RJ45 ports cover typical access needs — desktops, APs, IP phones (if PoE is used in other SKUs), and small servers. The four SFP+ slots support both 1G SFPs and 10G SFP+ modules, enabling high‑capacity uplinks to distribution/core switches or aggregation to virtualised stacks.
• Switching performance:With 128 Gbps switching capacity and a 96 Mpps forwarding rate, the unit handles common access and aggregation workloads without becoming a bottleneck for typical campus and branch deployments.
• Layer‑2 and Layer‑3 scale:The switch supports up to 4,000 VLANs (802.1Q), a MAC table of 16,000 entries and ARP table of 4,000 entries. IPv4 supports up to 6,000 unicast routes while IPv6 supports up to 2,000 — adequate for many mid‑sized enterprise networks that require inter‑VLAN routing and dynamic routing protocols.
• Advanced networking features:RGOS enables OSPF and RIP for dynamic routing, VRF for traffic segmentation, ACLs and TCAM‑based policies for security and QoS for traffic prioritisation. Device virtualisation with VSU lets administrators simplify network topology and manage multiple devices as a single logical switch.
• Management and deployment:Ruijie RGOS offers both cloud and local management options. The Ruijie Cloud and SON (Smart O&M Network) support zero‑touch provisioning, centralised monitoring and simplified software updates — useful for multi‑site rollouts and distributed networks.
• Operational considerations:The non‑PoE model is fanless, reducing noise and maintenance. The physical footprint (442 × 220 × 43.6 mm, 1U) fits standard rack environments. Certain fields (weight, power consumption, certifications) are not specified in the provided data; consult the official datasheet and local compliance documentation before installation.

• Quiet operation and low profile make it suitable for offices, network closets and small data rooms where noise and space are concerns.
• Scalable uplinks with SFP+ allow future growth to 10G aggregation without replacing the access layer.
• Flexible management — cloud-based or local — simplifies lifecycle operations, especially for distributed sites and managed service providers.
• Robust L2/L3 feature set supports common enterprise requirements including routing, segmentation, policy enforcement and high‑availability design patterns.

Use cases and scenarios where the RG-CS83-24GT4XS excels

The RG-CS83-24GT4XS is tailored to environments where compact form, quiet operation and enterprise features are required without the need for PoE from the same chassis. Typical deployments include:

• Campus access switch:Deployed in wiring closets to connect classroom PCs, printers, wired AP uplinks and staff desktops. SFP+ uplinks aggregate traffic to distribution switches at 10G, keeping inter‑building or inter‑floor latency low.
• Branch office connectivity:Centralised cloud management and zero‑touch provisioning make it straightforward to roll out consistent configurations across many branch locations while retaining local routing capabilities.
• Mid‑size enterprise edge:Where advanced L3 features (OSPF/RIP/VRF) are required for segmentation and routing between subnets, but PoE is not mandatory from the same chassis.
• Server access & small aggregation:For small server rooms or virtualization hosts requiring multiple gigabit connections with a 10G uplink option.
• Noise‑sensitive environments:Fanless design is suitable for front‑office racks, meeting rooms or classrooms where audible fan noise is unacceptable.

Comparisons with similar products in the market

When evaluating access‑layer switches with 24 gigabit ports and 10G uplinks, buyers commonly compare offerings from several vendors. Here are practical comparison points to consider:

• Cisco Catalyst 9200 Series:Cisco is known for broad enterprise feature sets, strong support ecosystem and mature software. Catalyst models may offer deeper visibility and wider third‑party integration but often at a higher cost and potentially greater complexity. The RG-CS83-24GT4XS provides core L2/L3 features and cloud management at a competitive price point for organisations prioritising value and simpler cloud‑centric operations.
• HPE Aruba 2930F / 2540 Series:Aruba switches are popular for campus environments and offer various PoE and fan options. Aruba models often include Aruba Central for cloud management. Ruijie’s offering competes on feature parity for routing and VLAN scale while offering Ruijie Cloud and SON as an integrated management option; selection often comes down to existing vendor ecosystem and specific feature requirements.
• Ubiquiti UniFi Switch 24 / UniFi‑XG:Ubiquiti targets simplified management and attractive pricing, with UniFi Controller/Cloud for orchestration. Ubiquiti tends toward ease of use and a unified ecosystem; the RG-CS83-24GT4XS aims more at enterprise L3 routing capabilities (OSPF/RIP/VRF) and professional routing features that some UniFi models do not emphasise.
• MikroTik CRS / CRS326‑style devices:MikroTik offers cost‑effective hardware with a wide feature set and scriptable RouterOS. MikroTik can be highly configurable but may require steeper learning for production campus networks. Ruijie provides a balance between enterprise L3 features and cloud management tailored for managed deployments.

Ultimately, selection depends on priorities: vendor ecosystem, advanced routing needs, cloud management preferences, PoE requirements and total cost of ownership. The RG-CS83-24GT4XS is positioned to offer strong value for organisations needing L3 access capabilities plus 10G uplinks without PoE in a quiet, compact package.

Customer testimonials and feedback

At the time of writing, there are no specific public customer testimonials tied to this exact SKU in the supplied material. However, feedback for similar Ruijie RGOS‑managed access switches and the Ruijie Cloud typically highlights:

• Ease of remote provisioning: network teams appreciate zero‑touch setup for multi‑site rollouts, reducing on‑site configuration time.
• Quiet operation: the fanless non‑PoE models are noted for low noise in office or classroom settings.
• Good price‑to‑feature ratio: customers often cite competitive pricing for enterprise L2/L3 features compared with premium brands.

Representative comments (illustrative):

• "Ruijie Cloud made provisioning several branch sites straightforward — minimal site visits and consistent configs."
• "The fanless design keeps our front‑office racks quiet, and the 10G uplinks let us aggregate without replacing the access layer."
• "Feature set met our VLAN and routing requirements for a regional office at a fraction of the cost of some mainstream vendors."

Practical considerations before purchase

Before procuring the RG-CS83-24GT4XS, verify a few items:

• Confirm you need the non‑PoE model — PoE variants exist (suffixes like -P / -PD) if you require power delivery to endpoints.
• Check the official datasheet for missing entries (weight, power consumption, certification marks such as CE/UKCA) and any site‑specific electrical requirements.
• Assess warranty and support terms — the provided warranty field is 0 (not specified); obtain warranty and support details from the vendor or reseller.
• Plan for uplink optics: SFP+ modules (1G/10G) are generally sold separately; confirm transceiver compatibility and fibre/copper needs.

Conclusion: Why choose the RG-CS83-24GT4XS?

The RG-CS83-24GT4XS is a practical choice for organisations seeking a cost‑effective Layer‑3 access switch with 24 gigabit ports and 10G‑capable uplinks. Its fanless, 1U design suits noise‑sensitive deployments while Ruijie RGOS and cloud management simplify provisioning and operations across multiple sites. With a solid L2/L3 feature set — VLANs, OSPF/RIP, VRF, ACLs, QoS and VSU virtualisation — it covers the essentials needed for campus access and branch office scenarios. When compared against market alternatives, it competes well on price‑to‑feature balance while offering the flexibility of cloud or local management. For network engineers and installers who need an access switch that supports future uplink scalability and centralised management without PoE from the same unit, the RG-CS83-24GT4XS is a strong contender. Always verify PoE needs, support/warranty terms and full technical datasheets before finalising a purchase.