Introduction: Meet the Ruijie Reyee RG-ES106F-P
The Ruijie Reyee RG-ES106F-P is a compact, fanless 6-port 10/100 Mbps unmanaged PoE switch engineered for simple, reliable power-and-data delivery in CCTV, SOHO and small office environments. With four PoE/PoE+ ports and a 54 W total PoE budget, this plug-and-play unit targets installers and small-business owners who need an affordable, low-noise and low-maintenance solution to power IP cameras, VoIP phones, wireless access points and other PoE devices. Its metal housing, DIP-switch selectable modes (extend/isolated/flow control), energy-saving traits and surge/ESD protection round out a practical feature set for real-world deployments.
- 6 x RJ45 ports:4 PoE/PoE+ ports plus 2 uplink 10/100 Mbps ports for simple connectivity.
- 54 W PoE budget:Supports 802.3af and 802.3at devices, suitable for multiple cameras or phones.
- Fanless metal housing:Quiet operation and flexible placement — desktop or wall-mounted.
- Special modes:Extend, isolation and flow control selectable via DIP switch for long-haul CCTV runs or port separation.
- Safety & efficiency:Surge/ESD protection and energy-saving features like IEEE 802.3az traits.
- Unmanaged:Plug-and-play simplicity—no configuration required.
Detailed specifications and benefits
Understanding the RG-ES106F-P’s specifications helps explain why it’s a sensible choice for many small deployments. Below are the main technical highlights and how each translates into practical benefits.
- Ports:6 x RJ45 (4 PoE/PoE+ + 2 uplink). The four powered ports let you connect and power cameras, phones or access points directly; two uplinks provide straightforward aggregation to your router or NVR.
- Speeds:10/100 Mbps (Fast Ethernet). Ideal for CCTV and many VoIP or light wireless AP use-cases where full gigabit throughput is not required.
- Switching capacity & forwarding rate:1.2 Gbps switching capacity and 0.89 Mpps forwarding rate — sufficient for multiple video streams and standard office traffic at Fast Ethernet speeds.
- MAC table:2,000 entries to handle connected devices in typical small deployments without hiccups.
- PoE budget:54 W total. That supports a mix of 802.3af (up to ~15.4 W per port) and 802.3at (PoE+, up to ~30 W per port) devices, allowing flexible device choices across four powered ports.
- PoE standard & pinout:802.3af/at, pins 1,2(+) and 3,6(−) — compatible with the majority of PoE cameras, APs and phones.
- Power input & consumption:100–240 V AC input (2.0 A). Power usage is <6 W with no PoE devices connected and <60 W at full PoE load — useful for planning mains and UPS capacity.
- Housing & mounting:Fanless metal housing supports quiet operation and offers desktop or wall-mount flexibility — useful for noise-sensitive or compact installations.
- Special modes:Extend mode enables longer cable runs (for CCTV) at reduced speed, isolated mode can segment ports for improved security or device separation, and flow control helps stabilize heavy traffic bursts.
- Protection & energy saving:Built-in surge and ESD protection help protect connected equipment in unpredictable electrical environments, while IEEE 802.3az energy-efficient Ethernet traits reduce power consumption when traffic is light.
- Physical & environmental:Compact dimensions (166 × 132.6 × 43 mm), lightweight (0.65 kg device), operating temperature 0–45 °C — appropriate for indoor installations.
- Reliability & warranty:MTBF >200,000 hours and a 3-year warranty provide reassurance for small businesses and installers.
Use cases and scenarios where the RG-ES106F-P excels
The RG-ES106F-P is designed to be straightforward and cost-effective. Typical scenarios include:
Perfect for small camera installations — for example, a retail front with up to four IP cameras. The 54 W PoE budget can comfortably power a combination of standard cameras and a PoE-powered NVR or other low-power devices. Extend mode helps when cameras are further from the switch than standard Ethernet lengths.
For home offices or micro-offices that require a handful of PoE devices (VoIP phones, a Wi-Fi AP and a security camera), the switch provides an economical plug-and-play option. Its fanless metal housing keeps the unit unobtrusive and quiet in office spaces.
Events, temporary retail pop-ups or contractor sites often need low-complexity networking with PoE power. The RG-ES106F-P’s simple setup and global AC input (100–240 V) make it easy to deploy and move between locations.
Access control systems, badge readers and some IoT endpoints that support PoE can be powered and connected through the switch, reducing the need for separate power supplies and simplifying cabling.
Comparisons with similar products in the market
When comparing the RG-ES106F-P to other switches, it’s helpful to think in categories rather than single-spec matchups.
The RG-ES106F-P is a Fast Ethernet (10/100) device. Compared to gigabit PoE switches, it has lower port speeds but often comes at a substantially lower price. If your use case is IP cameras (many 1080p cameras operate comfortably on 100 Mbps), VoIP phones, or APs with modest throughput needs, the cost savings and lower power draw make a 10/100 PoE switch attractive. If you need heavy LAN file transfers, multiple high-resolution camera streams or future-proofing for high-bandwidth Wi-Fi 6 APs, a gigabit PoE switch is the better choice.
Managed switches provide VLANs, QoS, monitoring and diagnostics; unmanaged switches like the RG-ES106F-P prioritize simplicity and low cost. For small sites that do not require network segmentation or detailed traffic control, the unmanaged switch eliminates configuration overhead. For enterprise or multi-tenant deployments, managed alternatives are recommended.
Compared with some competitor consumer-grade PoE switches, the RG-ES106F-P focuses on resilient hardware (metal housing, surge protection) and CCTV-friendly modes (extend/isolated). Some alternatives might offer gigabit ports, more PoE budget, or additional ports, but that typically increases cost and power consumption.
Customer testimonials and typical feedback
While individual experiences vary, common themes among users of similar small PoE switches include:
- "Easy to install — plug-and-play and powered our cameras right away," — installers and small-business owners appreciate the simplicity.
- "Quiet and compact — good for placing in an office closet or under a desk," — the fanless metal housing receives positive notes for low noise and durability.
- "Enough PoE for my four cameras and a phone — good value for the price," — customers often highlight the balance of price vs. PoE capability.
- "Extend mode was useful for a camera that was further than 100 m on a single run," — CCTV installers value the long-haul mode as a practical workaround for some site layouts.
These typical comments reflect real advantages for users who need dependable, low-complexity PoE switching. If you require verified reviews from specific customers, check vendor pages or reseller listings where end-user feedback is published.
Conclusion: Why the RG-ES106F-P is a strong choice for small PoE deployments
The Ruijie Reyee RG-ES106F-P is a focused product that targets small CCTV systems, SOHO networks and temporary or low-footprint installations. Its 4 PoE/PoE+ ports and 54 W budget strike a pragmatic balance between flexibility and cost. The fanless metal design, wall/desktop mounting options, extend and isolation modes, and built-in surge/ESD protection make it well-suited to the practical needs of installers and small businesses. With a 3-year warranty and solid reliability figures, it offers peace of mind without the complexity of managed switches.
If your requirements are modest in bandwidth but need reliable PoE delivery — for example, powering up to four cameras, a handful of phones or an access point — the RG-ES106F-P delivers an attractive combination of simplicity, protection and value. For deployments that demand gigabit speeds, advanced traffic control, or larger PoE budgets, consider stepping up to gigabit or managed PoE switches, but for many everyday small-scale networks the RG-ES106F-P is an economical and practical choice. Suggested retail price is $44.99, making it a competitive entry point for those who want dependable PoE without the configuration overhead.
