Introduction to the Ruijie RG-PA600I-P-F and its key features
The Ruijie RG-PA600I-P-F is a purpose-built 600 W, 56 V hot-plug power module designed for compatible Ruijie modular switches. Built to support Power over Ethernet (PoE) deployments and high-availability topologies, this module offers redundancy-capable, hot-swappable operation, rear-to-front cooling, and a compact form factor for enterprise and SMB network installations. Typical deployments rely on this module to deliver a substantial PoE budget (roughly 370 W on many supported chassis) while maintaining built-in protections for reliability and safety.
Key features at a glance:
- 56 V DC output with up to 600 W total output power
- Typical PoE budget ≈ 370 W (depends on chassis and configuration)
- Hot-plug / hot-swappable design; supports redundant configurations in supported chassis
- Rear-to-front airflow with built-in fan and a status LED for quick visual diagnostics
- Comprehensive protections: short-circuit, overcurrent, overvoltage, and over-temperature
- Compact dimensions (196 × 90 × 40 mm) and light weight (≈ 0.9 kg)
Detailed description of specifications and benefits
The RG-PA600I-P-F is engineered to provide stable DC power to PoE-enabled Ruijie switches. Below is a breakdown of the most important technical specifications and the practical benefits they bring.
- AC input voltage:100–240 V AC (some sources report a wider range of 90–290 V AC). This wide AC input range makes the module suitable for deployment across regions with varying mains voltages.
- AC frequency:50–60 Hz (reported ranges sometimes extend to 47–63 Hz), ensuring compatibility with common mains frequencies.
- HVDC input:Native support for high-voltage DC (reported 240 V DC; some pages list 192–290 V DC), useful where DC-fed infrastructure is present.
- Max input current:Vendor-reported values show AC ≈ 8 A and HVDC ≈ 4 A, helping you plan branch circuit and breaker sizing.
- Output voltage:56 V DC — a standard rail voltage for many PoE-enabled switch power systems.
- Max output power:600 W, providing a sizeable energy pool for powered devices when installed in compatible chassis.
- Max output current:Approximately 10.72 A, which aligns with the 56 V / 600 W rating.
- PoE budget:Typical PoE budgets are around 370 W on many supported chassis, though exact available PoE depends on the specific switch model, how many modules are fitted, and configuration settings.
- Dimensions:196 × 90 × 40 mm — compact enough for modular switch bays without consuming excessive space.
- Weight:Approximately 0.9 kg, making handling and field replacement straightforward.
- Cooling:Rear-to-front airflow with a built-in fan — important to consider in rack layouts and chassis airflow planning.
- Operating temperature:−10 °C to +55 °C;Storage temperature:−40 °C to +70 °C — suits typical indoor network environments.
- LED indicators:Output status LED (green = normal, red = fault, off = no power) for quick diagnostics without CLI access.
- Protections:Built-in safeguards against short-circuits, overcurrent, overvoltage, and over-temperature reduce risk to the chassis and attached PoE devices.
- The module is commonly listed as compatible with several Ruijie series, including RG-S5310-E PoE models, RG-S5760-X PoE models, RG-CS83/85/86 PoE series and RG-S61xx/62xx modular switches. Always verify exact chassis compatibility before purchase.
- Confirm CE/UKCA and any regional safety certifications with your supplier or the official datasheet. Although it supports hot-plug insertion, mains-related installation should be performed by qualified personnel.
Use cases and scenarios where the RG-PA600I-P-F excels
This power module is tailored to environments where PoE capacity, reliability, and uptime are critical. Typical scenarios include:
- Campus and branch deployments:When a floor or small building requires centralized PoE from a modular switch, a 600 W 56 V module like this provides ample headroom for access points, VoIP phones, and cameras.
- Enterprise closets and data centers:In racks that host modular Ruijie switches, this module supports redundant configurations that help maintain network availability during maintenance or single-unit failures.
- Surveillance and access control:For installations with many IP cameras or access control readers, the module’s PoE budget and protections help sustain continuous operation without single points of failure.
- Field replacement and upgrades:Network engineers and certified installers benefit from the hot-plug capability, allowing replacement or addition of power modules without taking the switch offline (provided chassis supports redundancy).
Comparisons with similar products on the market
When evaluating the RG-PA600I-P-F against similar switch power modules, consider three primary factors: power capacity, voltage standard, and platform compatibility.
- Power capacity:At 600 W, the RG-PA600I-P-F sits in the mid-to-high range for modular switch power modules. Lower-end modules (300–400 W) are cheaper but provide smaller PoE budgets; higher-end power supplies (700 W–1200 W) exist for very large PoE deployments but are bulkier and more expensive.
- Voltage & PoE compatibility:The 56 V DC output is standard for many vendor-specific PoE architectures. If you are replacing an OEM module, compatibility with the chassis is more important than raw wattage — many third-party modules do not fit vendor chassis or lack the required signaling for proper PoE allocation.
- Hot-plug & redundancy:Like many enterprise-class modules from competitors (Cisco, HPE/Aruba, Juniper), this Ruijie module supports hot-swapping and redundant configurations in supported chassis. Price and warranty are differentiators; some vendors bundle longer warranties as part of enterprise support contracts.
- Cooling direction and physical fit:Rear-to-front cooling is a specific design choice; verify airflow direction in your rack/ chassis planning. Other vendors use front-to-back designs, so mixing modules with different airflow orientations can lead to thermal issues.
In short, the RG-PA600I-P-F is best compared to other vendor-specific 500–800 W modules: it balances power, size, and cost. Its main advantages are Ruijie platform integration and a PoE budget suited for many mid-sized PoE deployments. Always verify chassis compatibility and vendor support policies before choosing a replacement module.
Customer testimonials and feedback
There are no official, attributable customer testimonials included with the product data provided here. However, feedback commonly reported by installers and IT managers for comparable hot-plug 56 V, 600 W modules tends to emphasize the following themes:
- Reliability:Installers appreciate redundant-capable modules that allow maintenance without service disruption when paired with a second module.
- Practical PoE capacity:Many users comment that the 370 W typical PoE budget (subject to chassis configuration) is sufficient for a moderately sized access layer switch supporting APs and cameras.
- Ease of replacement:Hot-swap capability and compact size reduce truck rolls and mean faster field service times.
- Thermal and noise considerations:Rear-to-front cooling and the built-in fan are generally effective, though some deployments note the importance of matching airflow direction across a rack to avoid hot spots.
Conclusion: Why the RG-PA600I-P-F is a strong choice
The Ruijie RG-PA600I-P-F 600 W 56 V hot-plug power module is a well-rounded option for administrators and installers who need a reliable, mid-to-high-range PoE-capable power source for Ruijie modular switches. Its combination of 600 W output, a practical PoE budget, hot-swappable redundancy, compact form factor, and standard protections make it suitable for enterprise closets, campus aggregation points, and surveillance-heavy installations.
Before purchasing, confirm chassis compatibility, verify regional safety certifications (CE/UKCA, etc.), and consider support and warranty options — product data here indicates a warranty value of 0, so confirm what coverage is offered by the reseller or Ruijie. Priced with a suggested retail around $399 (cost price data: $302.04), the RG-PA600I-P-F offers a balance of affordability and capability for many PoE deployments.
For organizations standardizing on Ruijie switches, this module is a pragmatic choice to deliver resilient, hot-swappable power with the protections and physical design needed in modern network racks.
