All‑Rack 1U Brush Strip Cable Pass‑Through Panel 19" 1UBSP ITM001156

Introduction to the All‑Rack 1U Brush Strip (1UBSP)

All‑Rack 1UBSP — 1U Brush Strip (Cable Pass‑Through Panel)is a simple, cost‑effective accessory designed to tidy and protect cable entry and exit points in standard 19" server racks and cabinets. At a glance it looks like a slim 1U panel fitted with dense nylon bristles that allow patch cords and cable bundles to pass through while limiting dust ingress and uncontrolled airflow through unused rack openings. Lightweight and unobtrusive, this accessory is aimed at installers, system administrators and DIY users who want a neater rack appearance and improved airflow management without complex modifications.

Key features

• Rack Height:1U (44 mm) typical.
• Fits:standard 19" server racks and cabinets.
• Function:cable pass‑through with brush strip to separate patch cords and reduce dust.
• Airflow:reduces uncontrolled airflow through empty rack openings, supporting cabinet cooling efficiency.
• Supplier SKU / Code:1UBSP / ITM001156.
• Price indication:cost price USD 4.80; suggested retail price USD 24.99 (confirm with distributor).

Detailed specifications and benefits

The All‑Rack 1UBSP is a straightforward panel that offers several technical and practical benefits. Typical specifications (to be confirmed with the supplier) include a 1U rack height (44 mm) and a 483 mm (19") panel width suitable for standard racks. The depth of the panel is commonly shallow (typical models ~14–15 mm), and the build is usually a steel or metal panel fitted with a nylon brush insert. The bristles are typically high‑density nylon to provide a snug but flexible seal around cables.

Benefits of those specifications include:

• Neater cable routing:The brush strip separates signal and patch cords as they enter and exit the cabinet, preventing tangling and making management and identification easier.
• Reduced dust ingress:Bristles limit direct airflow and dust entering through unused portions of the rack, helping to keep internal components cleaner and reducing maintenance.
• Improved cooling efficiency:By reducing uncontrolled airflow through empty rack spaces, a brush strip helps maintain designed front‑to‑rear airflow across installed equipment, improving cooling performance and potentially reducing fan speeds and noise.
• Professional appearance:A simple brush strip improves the visual finish of a rack or cabinet compared with open cutouts or loose cables.
• Compatibility:Front‑mounts to standard 19" rack posts and is typically compatible with both 2‑post and 4‑post racks. Comparable products often include mounting hardware (10/32 & 12/24 screws), but confirm what is supplied with this SKU.

Notes on compliance and confirmation: the supplier listing uses SKU 1UBSP and supplier code ITM001156. Confirm exact dimensions, material, weight and any included hardware with the distributor before finalising procurement. Do not assume CE/UKCA marking or warranty coverage without checking the official datasheet. The current stock listing shows 9 units and a product URL (https://www.dynamic-cctv.com/.../ITM001156) for more details; last updated 2025‑09‑11.

Use cases and scenarios where the 1UBSP excels

The All‑Rack 1UBSP is ideal for multiple environments and scales of deployment. Typical use cases include:

• Network cabinets and patch rooms:In comms rooms and small network closets, brush strips make it easy to route dozens of patch cords while preserving airflow and a tidy look.
• Server racks:For servers and network gear with front or rear cable runs, the brush strip helps separate power, network and fibre runs and prevents stray cables from obstructing airflow paths.
• Telecom cabinets and edge installations:In telecom closures and edge racks where environmental control may be limited, brush strips reduce dust entry and maintain more predictable internal temperatures.
• Home labs and small office deployments:DIY users can easily improve their rack appearance and cable management without expensive cable management accessories.
• Live installations where minimal disruption is required:Bristles allow adding or removing cables without removing the whole panel, which helps during incremental upgrades or maintenance.

Because it is low cost and simple to install, the brush strip is particularly useful where multiple small openings would otherwise remain uncovered, or where a full cable management solution (like vertical managers or sealed grommets) is not necessary or cost‑effective.

Comparisons with similar products on the market

When comparing the All‑Rack 1UBSP with other rack accessories, consider three common alternatives: blank panels, rubber grommet panels, and full cable management panels.

• Blank panels:Solid blank panels fully block airflow and dust when no cables pass through. They are ideal for completely unused openings but require removal to route cables. The brush strip is preferable when cables need to be routed through while still limiting airflow and dust.
• Rubber grommet/pass‑through panels:These provide sealed holes for individual cables or small bundles and can offer a tighter seal than brush bristles. However, grommet panels are less flexible for different cable diameters and higher quantities of patch cords. The brush strip offers a good balance of flexibility and sealing for varied cable counts.
• Dedicated cable management panels (finger duct, horizontal managers):These offer routing channels, rings or fingers for structured cable management and often include covers. They’re more robust for large, organised cable runs but are bulkier, more expensive, and may not be needed where only a pass‑through with dust reduction is required.

Price point is also a differentiator. The All‑Rack 1UBSP has a low cost price (USD 4.80) and a modest suggested retail price (USD 24.99). That makes it an economical choice for teams needing multiple panels across many racks or where budget is constrained.

Customer testimonials and reviews

At the time of writing, there are no verified customer testimonials or published reviews specific to SKU ITM001156 available in the supplied data. For many small accessories like brush strips, user feedback typically emphasises ease of installation, the tidy finish they provide and the modest effect on dust reduction and airflow. Prospective buyers should consult distributor listings or retailer review sections for real user feedback and check the product gallery for installation photos.

Installation, safety and practical tips

• Confirm hardware:Check whether mounting screws are included. Comparable products often supply 10/32 and 12/24 screws, but confirm with your supplier.
• Observe rack load and airflow:Install the panel in accordance with your rack manufacturer’s guidelines, and ensure it does not impede intended airflow patterns for equipment cooling.
• Handle cabling safely:Turn off or isolate equipment where necessary when routing cables close to live equipment, and seek a qualified installer for complex or critical installations.
• Use with other accessories:Combine brush strips with blank panels, grommets or cable management fingers to balance sealing, organisation and accessibility as needed.

Conclusion: Why choose the All‑Rack 1UBSP?

The All‑Rack 1UBSP brush strip is an economical, low‑profile solution for cable pass‑through needs in 19" racks. It delivers immediate benefits in cable organisation, reduces dust ingress and helps control unwanted airflow through rack openings—contributing to cleaner interiors and more stable cooling performance. Its simple design makes it fast to install and flexible for a variety of use cases, from small office racks to telecom and data centre edge deployments.

Before purchasing, confirm the exact panel dimensions, materials, included hardware and any regulatory markings with your supplier. With a low cost and straightforward function, the All‑Rack 1UBSP is a practical addition to any rack toolkit for those who want a neat, functional and budget‑friendly cable pass‑through solution.