Haydon HAY-RJ45CAT6-T100RAP Cat6 Pass-Through RJ45 Modular Plugs (Tub of 100)

Introduction: Haydon HAY-RJ45CAT6-T100RAP at a glance

Haydon HAY-RJ45CAT6-T100RAP — Tub of 100 Cat6 Pass‑Through RJ45 Plugsis a practical pack of pass‑through (push‑through) RJ45 modular plugs designed for Cat6 (Gigabit Ethernet) terminations. Supplied as a tub of 100 connectors, these plugs are aimed at installers, contractors and savvy DIYers who need to terminate multiple UTP Cat6 runs quickly and reliably. The pass‑through design allows conductor wires to protrude through the plug body, enabling installers to verify pair order before crimping — saving time and reducing waste.

Key features

• Pack size:Tub of 100 connectors — good for bulk jobs and ongoing site work.
• Pass‑through design:Feed‑through construction lets you see and confirm each conductor before crimping.
• Cat6 rated:Intended for Gigabit Ethernet installations when used with appropriate Cat6 cable and crimping practices.
• Tool compatibility:Designed to work with rapid‑fit/pass‑through crimp tools — e.g. Haydon HAY‑RJ45TOOLRAP — and other pass‑through crimpers.
• Clear housing:Typical clear plastic plug body improves visibility of conductor order during termination.

Product specifications and what they mean

The HAY‑RJ45CAT6‑T100RAP is described by Haydon with a concise set of representative technical notes. Below is a breakdown of the relevant specifications and practical implications for installers.

• Brand / Part number / Pack quantity:Haydon HAY‑RJ45CAT6‑T100RAP, supplied as a tub of 100 connectors (supplier SKU ITM005595).
• Category:Network cabling accessories; stock availability listed as limited units in some channels.

• Connector type:RJ45 (8P8C) pass‑through modular plug — a common format for Ethernet terminations that lets wires pass through the plug face for visual confirmation.
• Intended rating:Cat6 — suitable for Gigabit Ethernet when correctly terminated to Cat6 UTP cable.
• AWG compatibility:Haydon does not publish a strict AWG tolerance online; representative products of this style commonly accept 24–26 AWG. Some Cat6 plugs elsewhere support 23 AWG solid conductors; confirm with Haydon or your supplier if you are terminating thicker 23 AWG Cat6 cable.
• Contact plating and housing:Haydon’s product page does not disclose full contact plating details; typical pass‑through plugs in this segment use gold‑plated contacts for reliable low‑loss connections and a clear plastic housing for wire visibility.
• Tool compatibility:Specifically designed for pass‑through / RAP rapid‑fit crimp tools (for example HAY‑RJ45TOOLRAP), which speed up termination and trimming in one motion.
• Compliance and datasheets:Haydon does not publish a complete numeric datasheet listing max OD, temperature or flammability ratings on the public product page; contact your supplier or Haydon for formal datasheets if you need these metrics for procurement or compliance.

Benefits: Why pass‑through Cat6 plugs matter

• Faster, more reliable terminations:Being able to see wires protrude through the plug makes pair verification immediate, reducing the risk of miswired jacks and rework.
• Reduced waste and cost savings:Fewer mis‑crimps means fewer wasted plugs and less time spent redoing terminations on a job site — especially important when terminating tens or hundreds of runs.
• Bulk‑friendly packaging:A 100‑connector tub is convenient for contractors who perform multiple terminations each day and prefer to buy in volume.
• Compatibility with RAP crimpers:When paired with a rapid‑fit pass‑through crimper, these plugs enable a single‑handed workflow that trims excess conductors and crimps simultaneously, speeding throughput.

Use cases and scenarios where this product excels

The straightforward design and pack size make the Haydon pass‑through Cat6 plugs especially suited to the following situations:

• Structured cabling installations:Multi‑room installations in homes, offices or small commercial sites where dozens of terminations are required — the pass‑through design helps maintain consistent wiring across outlets and patch panels.
• Network upgrades to Gigabit:When upgrading from Cat5e to Cat6 or installing new Gigabit Ethernet links, these plugs support the necessary wiring standards when used with appropriate cabling and technique.
• On‑site, quick terminations:Field technicians and emergency fixes benefit from the ability to verify pair order visually and finish terminations quickly without extensive bench tools.
• Training and learning environments:For technicians in training, pass‑through plugs make it easier to teach correct pair sequencing (T568A/T568B) and crimping methods without repeated errors.
• Inventory for installers:Keeping a tub of 100 connectors on a van or in a stockroom is economical for ongoing maintenance and service calls.

Comparisons with similar products

When choosing RJ45 plugs, buyers typically weigh pass‑through plugs against standard (non‑pass‑through) and shielded variants. Here’s how Haydon’s HAY‑RJ45CAT6‑T100RAP compares:

• Verification:Pass‑through wins — you can see conductor order before crimping, significantly reducing wiring errors.
• Speed:With a compatible pass‑through crimper, terminations are faster due to combined trimming and crimping steps.
• Cost:Standard plugs are sometimes slightly cheaper per unit, but higher rework rates on large jobs can outweigh the savings.

• Performance:Cat6 plugs are designed to meet higher performance tolerances for Gigabit Ethernet; using Cat6 plugs with Cat6 cable preserves the intended channel characteristics better than Cat5e plugs.
• Compatibility:Cat6 plugs are typically backwards compatible with Cat5e cable, but for best practice match plug rating to cable rating.

• Environment:The Haydon part is an unshielded style typical for UTP installations; shielded plugs are necessary in high‑EMI environments or with STP/FTP cables.
• Use selection:Choose shielded plugs only if you are using shielded cable and maintain a proper grounding/EMI mitigation strategy.

Customer feedback and reviews

There are no specific customer testimonials published on Haydon’s product page for this SKU. However, common themes seen in installer feedback for pass‑through Cat6 plug products generally include:

• Positive:Faster terminations, easy pair verification, and reduced mis‑crimps when used with a compatible pass‑through crimper.
• Notes/caveats:Installers often remind buyers to confirm AWG compatibility — some Cat6 cables (23 AWG solid conductors) may not seat properly in all pass‑through plugs intended for 24–26 AWG. Also, if you need formal compliance metrics (temperature, flammability, exact contact plating), request a datasheet from the supplier.

If you are assessing this product for procurement, consider ordering a small sample tub and doing a hands‑on test with your exact cable type and crimp tool to ensure perfect compatibility on first large jobs.

Practical tips for best results

• Always verify wire order (T568A or T568B) with the conductors protruding before you crimp.
• Use the recommended pass‑through crimper (e.g. HAY‑RJ45TOOLRAP) to trim and crimp in one motion — this reduces manual trimming errors.
• Confirm your cable’s conductor AWG — if you use 23 AWG solid Cat6 cable, check with Haydon or test a sample termination to ensure a secure fit.
• For installations requiring shielding or specific environmental ratings, request full datasheets to confirm approvals and plating details.

Conclusion: Who should choose Haydon HAY‑RJ45CAT6‑T100RAP?

The Haydon HAY‑RJ45CAT6‑T100RAP tub of 100 Cat6 pass‑through RJ45 plugs is a solid choice for installers who value speed, repeatability and visual verification during termination. Its pass‑through design minimizes wiring errors and reduces wasted parts, and the bulk tub format suits contractors and maintenance teams performing many terminations. While Haydon’s online listing does not publish every technical numerical detail (AWG, plating, temperature or approvals), the product is positioned as a practical, job‑site friendly option when paired with a compatible RAP crimper.

If you need full compliance metrics for procurement, or if you plan to use thicker 23 AWG solid Cat6 cable, contact Haydon or your supplier to confirm AWG compatibility and request the formal datasheet. For most typical Gigabit Ethernet UTP Cat6 terminations on commercial and residential jobs, these pass‑through plugs deliver faster, more reliable results compared with standard non‑pass‑through connectors — making them a useful addition to any installer’s toolkit.

Bottom line:For bulk terminations where speed, verification and reduced rework matter, the Haydon HAY‑RJ45CAT6‑T100RAP offers a cost‑effective, practical solution — especially when used with the recommended pass‑through crimp tool.