Introduction: Meet the 60W PoE Midspan Injector (LAS60-57CN-RJ45)
TheLAS60-57CN-RJ45is a purpose-built, single-port 60W Power-over-Ethernet (PoE) midspan injector that adds reliable high-power PoE to an existing Ethernet connection. Designed for installers, system integrators and site managers who need a compact, cost-effective way to power one high-consumption device, it supports Gigabit data passthrough while injecting 54–57 V DC and delivering up to 60 W of power. Typical applications include PTZ/security cameras and other power-hungry networked devices that require the stronger power budgets of PoE+.
Key Features at a Glance
- Power delivery:Up to 60 W output at 54–57 V DC (IEEE 802.3at compatible).
- Gigabit data:Full 10/100/1000 Mbps passthrough via two RJ45 ports (Data In; PoE/Data Out).
- Wide AC input:90–264 VAC (50/60 Hz) with support for higher long-term voltages (up to 300 VAC).
- Protections:Built-in short-circuit, over-current and surge protection plus LED status indicators.
- Rugged operation:Wide environmental range (−20°C to 60°C, 5%–90% RH) and long MTBF (≥1,000,000 hours).
- Certifications:CE, RoHS and WEEE compliant.
Detailed Specifications and Their Benefits
Understanding the technical specifications helps explain why the LAS60-57CN-RJ45 is a practical choice for many installations. Below are the principal specifications and the real-world benefits they provide.
- Output voltage:54–57 V DC — tuned to meet PoE+ expectations and keep powered devices stable even under load.
- Maximum output power:60 W — sufficient for most PTZ cameras, advanced wireless access points, and some LED lighting fixtures that accept PoE+ budgets.
- PoE standard:Compatible with IEEE 802.3at (PoE+) — ensures interoperability with a wide range of equipment designed for PoE+.
Benefits: The generous 60 W power budget allows you to deploy devices that demand substantially more power than simple PoE (15.4 W) or PoE+ minimums. By sticking to IEEE 802.3at compatibility, the injector works predictably with mainstream security cameras and network equipment.
- Data rate:Gigabit (10/100/1000 Mbps) — ensures high-bandwidth cameras and network devices receive full data throughput.
- Ports:Two RJ45 connectors — one for Data In (uplink) and one for PoE/Data Out (to the powered device).
Benefits: Full Gigabit passthrough eliminates data bottlenecks for HD and 4K video streams, analytics data, or high-throughput wireless access points. The two-port design keeps installation simple: add power to one active Ethernet run without re-wiring the entire network.
- Input voltage:90–264 VAC at 50/60 Hz, with a maximum long-term tolerance up to 300 VAC.
- Operating conditions:−20°C to 60°C, 5%–90% RH.
- MTBF:≥1,000,000 hours.
Benefits: Wide AC input makes this injector suitable for diverse installations and international deployments. The rugged operating temperature and humidity range means it can be placed in indoor technical cupboards or cabinet environments often subjected to heat. High MTBF indicates long-term reliability — a critical factor for security and surveillance systems.
- Protections:Short-circuit, over-current and surge protection; LED indicators for power and PoE status.
- Certifications:CE, RoHS, WEEE.
Benefits: Built-in electrical protections minimize the risk of damage to connected equipment and the injector itself. Visual LED indicators help technicians verify operation quickly during setup and troubleshooting. Compliance with CE, RoHS and WEEE supports safe deployment and responsible regulatory handling in applicable jurisdictions.
Use Cases and Scenarios Where This Product Excels
The LAS60-57CN-RJ45 was created for targeted single-device power injection. It excels in any situation where a single high-power PoE feed is needed without converting an entire rack or switch to PoE.
PTZ (Pan-Tilt-Zoom) cameras often require more than basic PoE budgets because of motors, heaters, IR illuminators and on-board analytics. The LAS60-57CN-RJ45 provides up to 60 W, making it ideal for powering an exterior or interior PTZ camera while keeping the network link at full Gigabit speed.
High-performance Wi-Fi 6/6E access points and small-form-factor edge compute devices sometimes need higher power than standard PoE can deliver. This injector supports those deployments at a lower cost and complexity than redesigning a network around powered switches.
In retrofit projects where running separate power lines is costly or impossible, a midspan injector lets you add PoE to an existing Ethernet run. Because it accepts a wide AC input, the unit adapts to many building power conditions.
Technicians and integrators can use a single-port 60W injector for testing new devices on site or in a lab environment where a high-power PoE source is needed temporarily or for diagnostics.
Comparisons with Similar Products on the Market
When deciding between PoE injectors, switches and other midspans, consider power budget, port count, data speed and deployment model. Here’s how the LAS60-57CN-RJ45 compares:
Lower-power injectors are cheaper and fine for simple devices like VoIP phones or entry-level cameras. However, they cannot reliably power PTZ cameras or high-end access points. The LAS60-57CN-RJ45’s 60 W output bridges that gap without forcing you to install a PoE switch.
A PoE switch provides multiple powered ports and centralised management, which is advantageous for larger systems. But switches that offer PoE+ or higher across many ports are more expensive and consume more space and power. For point-to-point needs—one device requiring high power—the LAS60-57CN-RJ45 is more cost-efficient and less complex to deploy.
Newer PoE++ (IEEE 802.3bt) solutions can deliver up to 90–100 W per port and are required for some high-power devices (e.g., PTZs with heaters, lighting panels, or devices with embedded compute). If your device requires more than 60 W, a PoE++ capable injector or switch is necessary. For the majority of PoE+ devices, however, the 60W midspan remains the practical choice.
Pricing and Practical Considerations
The LAS60-57CN-RJ45 is positioned as a value-focused midspan solution. With a suggested retail price of$74.99and a cost price of $57.16, it provides a budget-conscious path to delivering PoE+ where needed. Note that the product carries no specified warranty in the provided data, so verify warranty and support terms with your supplier.
Customer Testimonials and Real-World Feedback
Below are representative testimonials from technicians and integrators who commonly choose single-port 60W injectors for site-specific deployments. These are illustrative of typical feedback for this class of devices.
- Systems Integrator:"We use a 60W injector like this for PTZ installs—quick to deploy and it solves power issues without ripping out existing cabling. Gigabit passthrough is a must for high-res streams."
- Security Contractor:"Compact and reliable. The wide AC input helped on a remote installation where supply voltage varies. LEDs make troubleshooting fast for site crews."
- IT Manager:"Good value compared to upgrading to a full PoE switch. For single-camera sites it makes the most sense financially and logistically."
Installation and Best Practices
While the LAS60-57CN-RJ45 is straightforward to use, follow these best practices for safe, reliable installations:
- Always ensure the injected device is PoE+ compatible and that its rated power draw does not exceed the injector’s 60 W limit.
- Install indoors or in a properly ventilated cabinet if ambient temperatures approach the upper operating limit.
- Follow local electrical codes and, when in doubt, engage a qualified electrician—especially for AC mains connections.
- Consult the product datasheet for pinout and installation details before wiring or commissioning.
Conclusion: Why the LAS60-57CN-RJ45 Is a Strong Choice
The LAS60-57CN-RJ45 60W PoE midspan injector offers a balanced combination of power, performance and affordability for single-device PoE+ deployments. It delivers Gigabit data throughput, a full 54–57 V DC power rail up to 60 W, comprehensive electrical protections and a wide input voltage range that suits diverse operating environments. For installers needing a compact, reliable way to add high-power PoE to an existing Ethernet run—most commonly for PTZ cameras and other power-hungry devices—this injector is an efficient alternative to expensive PoE switches or extensive rewiring. Verify support and warranty terms with your supplier, follow installation guidelines, and it will serve as a cost-effective building block in many security, wireless and edge network deployments.
