Introduction to the Haydon EZRJ45C EZ RJ45 Pass‑Through Crimps
The Haydon EZRJ45C is a practical pack of 10 pass‑through (EZ) RJ‑45 crimp connectors designed to speed up ethernet cable terminations for home, office and small commercial installs. Engineered to work with the matching EZRJ45T crimp tool, these pass‑through connectors let you feed conductors through the plug for visual verification of T568A/B wiring before a single‑step crimp and trim. The result is a faster, cleaner termination workflow with lower rework risk — appealing to network installers, IT technicians and DIY users who favour efficiency and reliability.
- Pack size:10 connectors (ITM001107).
- Connector type:Pass‑through (EZ) RJ‑45 for visual wire verification and single‑step crimp & trim when used with the EZRJ45T tool.
- Intended use:Typical Cat5e/Cat6 style terminations — confirm exact category rating with the manufacturer.
- Recommended pairing:Best used with EZRJ45T crimp tool (sold separately) for correct seating and trimming.
Detailed specifications and benefits
This section breaks down the product details and the practical benefits installers derive from choosing EZRJ45C pass‑through connectors.
- Manufacturer SKU:ITM001107 / EZRJ45C.
- Pack size:10 connectors per pack.
- Brand:Haydon (reseller listings also reference Dynamic for similar parts).
- Wiring:Pass‑through — supports easy T568A and T568B verification prior to crimping.
- Cable type:Designed for quick Cat5e/Cat6 style terminations; confirm exact category and performance rating with manufacturer documentation.
- Typical family specs (confirm with manufacturer):clear polycarbonate housing, gold‑plated contacts (commonly 50 µin), support for 24–23 AWG conductors, and a maximum cable outer diameter roughly ~6.9–7.4 mm.
- Certifications:INSUFFICIENT DATA — check the manufacturer for UL, RoHS, UKCA or other compliance marks.
- Faster, more reliable terminations:Pass‑through design simplifies alignment and verification of conductor order, reducing miswires and wasted plugs.
- Cleaner finish:When used with the matching EZRJ45T tool, the single‑step crimp & trim leaves a neat cut and correct seating for professional results.
- Good for low‑to‑medium volume work:Packs of 10 are ideal for installers who do occasional runs, patch cable builds, or small office deployments without buying bulk reels of connectors.
- Visual confirmation:Clear or translucent housings used by EZ families let you verify conductor alignment and contact insertion before crimping.
- Cost efficient:With a suggested retail price of 2.99 (currency unconfirmed) and a cost price listed as 1.80, these connectors present a low per‑termination cost for small jobs; confirm currency for exact margin calculations.
Use cases and scenarios where the product excels
The Haydon EZRJ45C pack is tailored to several practical scenarios where pass‑through RJ‑45 connectors offer distinct advantages:
- Building patch leads or custom length cables for home AV, gaming, or smart home setups — the pass‑through design helps DIYers avoid wiring mistakes and achieve a tidy result with minimal training.
- Small business IT teams doing modest numbers of terminations (e.g., office moves, adding workstations) benefit from the speed and verification this connector type enables without ordering large commercial packs.
- Technicians carrying a kit for reactive service calls will appreciate a compact pack of 10 connectors for fast repairs of damaged patch cables or last‑mile fixes where speed and reliability are critical.
- Installers performing small cabling jobs — meeting rooms, kiosks, or small retail outlets — can use these connectors to achieve professional terminations without committing to larger inventories of parts.
Comparisons with similar products on the market
Pass‑through RJ‑45 connectors are widely available from multiple vendors. Here’s how the Haydon EZRJ45C compares to other common options and what to consider when choosing between them.
- Pass‑through advantage:Clear visual confirmation of conductor order and a cleaner single‑step crimp & trim (when used with a compatible tool) reduces rework and makes terminations easier for novices.
- Standard plug advantage:Slightly cheaper in bulk and compatible with more generic crimp tools; however, alignment and trimming need extra attention, which can increase failure rates for inexperienced users.
- Many manufacturers produce EZ or pass‑through RJ‑45 plugs with similar physical characteristics (clear housing, gold contacts). Differences are normally in tolerance, contact plating spec, and certified category rating (Cat5e vs Cat6). The Haydon listing shows expected family characteristics but lacks a published Haydon PDF/datasheet for this SKU, so installers should verify category rating and contact plating before making definitive performance claims.
- Pack configuration matters: the Haydon pack of 10 is convenient for low‑volume work, while competitor packs are often sold in larger quantities for depot stocking or high volume installers.
- To get the full value of EZRJ45C, pair it with the EZRJ45T crimp tool. Using generic crimp tools may still work, but the single‑step crimp & trim advantage could be reduced or lost if the tool does not support pass‑through trimming.
Customer testimonials and reviews
There are limited public reviews specifically tied to SKU ITM001107 in available reseller listings. Reseller product pages confirm pack size and show images consistent with EZ‑RJ45 family plugs, but a dedicated manufacturer datasheet or extensive public reviews were not found during verification.
Typical feedback for EZ/pass‑through RJ‑45 plugs (from installers and reseller notes) tends to include the following themes — presented here as generalised, commonly reported impressions rather than verified quotes for this SKU:
- Positive:"Faster terminations with fewer miswires" — Installers often praise pass‑through plugs for speeding up the termination process and making wire order checks straightforward.
- Positive:"Neat, consistent crimp when using the matching tool" — Using the specific EZRJ45T tool typically produces a clean crimp & trim and consistent contact seating.
- Neutral/negative:"Confirm category rating and compatibility" — A common caution is to verify whether a particular EZ plug is rated for Cat6 performance if that is required for a project; not all visually identical plugs meet the same electrical specs.
Conclusion — why choose Haydon EZRJ45C?
The Haydon EZRJ45C pack of 10 pass‑through RJ‑45 connectors is a practical, cost‑effective option for anyone doing occasional to modest numbers of ethernet terminations. Its pass‑through design delivers real workflow advantages — visual verification of wiring, simplified single‑step crimp & trim when paired with the EZRJ45T tool, and a tidy finished result. These benefits make it particularly appealing for home network builders, small business IT teams, and field technicians who prioritise speed, accuracy and a professional finish without buying bulk volumes.
Before purchasing, note the following practical checks: verify the exact category rating (Cat5e vs Cat6) from the manufacturer if link performance is critical; confirm plating and AWG support if you have specific cable types; and determine the currency of the cost and suggested price (cost_price = 1.80 and suggested_price = 2.99 are shown in the product record, but the currency was not provided).
In summary, if you need a compact, easy‑to‑use solution for quick ethernet terminations and you pair these connectors with the recommended EZRJ45T crimp tool, the Haydon EZRJ45C offers a practical mix of speed, accuracy and value for low‑volume installation work.
