Hikvision DS-3WR3X-1 Nano USB Wi‑Fi Dongle, Wi‑Fi 6 (2.4 GHz)

Introduction: Meet the Hikvision DS-3WR3X-1 Nano USB Wi‑Fi Dongle

Hikvision DS‑3WR3X‑1 Nano USB Wi‑Fi Dongleis a compact, drive‑free USB adapter designed to add wireless connectivity to compatible Hikvision DVR/NVR recorders. Built around Wi‑Fi 6 (IEEE 802.11ax) technology on the 2.4 GHz band, this tiny dongle provides a simple, low‑profile way to connect a recorder to a wireless network in environments where running Ethernet is impractical or where a wired connection is not available. The adapter is intended for recorder (station/client) use and can operate as a Soft AP. It is not designed to provide wireless access directly to IP cameras — compatibility depends on the recorder model and firmware.

• Wi‑Fi 6 (IEEE 802.11ax) single‑band operation (2.4 GHz) with backward compatibility to 802.11b/g/n.
• Plug‑and‑play USB 2.0 interface — driver‑free with supported Hikvision recorders.
• Operating modes: Station (client) and Soft AP for flexible deployment.
• Internal antenna in a nano form factor (21 × 15 × 7.7 mm) for minimal protrusion and neat installations.
• Rated data link up to 20 Mbps to the DVR (Hikvision specification), suitable for remote management, event upload and system updates.
• CE marked where applicable; sellers should confirm regional certification and recorder compatibility.

Detailed specifications and benefits

The DS‑3WR3X‑1 is engineered as a straightforward wireless accessory for Hikvision recorders rather than a general‑purpose PC Wi‑Fi dongle. Below are the core specifications and the practical benefits these deliver.

• Wireless standard:IEEE 802.11ax / b / g / n (Wi‑Fi 6) — provides improved spectrum efficiency and better performance in congested 2.4 GHz environments compared with older standards.
• Frequency:2.4 GHz — longer range and better wall penetration than 5 GHz, but more susceptible to interference from household devices.
• Data rate:Up to 20 Mbps (to DVR) — sufficient for control commands, event notifications, occasional remote playback and firmware updates; not intended for heavy multi‑camera live streaming directly over the dongle.
• Wireless security:WPA‑PSK / WPA2‑PSK — supports standard Wi‑Fi encryption protocols expected in recorder network setups.

• Interface:USB 2.0 — compatible with the USB ports on most recorders; provides power and data without external adapters.
• Antenna:Internal — ultra‑compact design (21 × 15 × 7.7 mm) keeps the dongle tucked into the recorder chassis or sitting unobtrusively at the USB port with minimal protrusion.
• Form factor:Nano USB — ideal for racks or enclosed DVR environments where a low profile is desirable.

• Working temperature:0 °C to 45 °C;Storage temperature:−40 °C to 70 °C.
• Working humidity:10%–90% RH non‑condensing;Storage humidity:3%–90% RH non‑condensing.
• Intended use:Connect recorder to wireless network (station); Soft AP supported for local configuration or temporary network access.
• Model / SKU:DS‑3WR3X‑1 (supplier_code ITM005581).
• Compliance:CE (region dependent) — verify regional markings and firmware support with supplier or authorised channels.

Benefits: the DS‑3WR3X‑1’s Wi‑Fi 6 technology offers better performance in crowded RF environments, and its driver‑free plug‑and‑play operation simplifies installation and reduces on‑site troubleshooting. The nano form minimizes mechanical stress on USB ports and keeps installations tidy. Because the dongle is targeted at recorder connectivity, it reduces the need for additional cabling and enables flexible placement of recorders in locations with reliable Wi‑Fi coverage.

Where this dongle excels: use cases and scenarios

The DS‑3WR3X‑1 is best suited to professional and small business CCTV deployments that use Hikvision recorders and need a simple wireless uplink. Typical scenarios include:

• Construction sites, pop‑up retail, or temporary monitoring where running ethernet is impractical — plug the dongle into the recorder to connect to an available Wi‑Fi network.
• Events or short‑term surveillance where fast setup and minimal infrastructure are priorities.

• Recorders installed in locations without convenient Ethernet paths — the dongle removes the immediate need to run cable while retaining recorder functionality.
• Environments where a low‑profile wireless adapter is preferred (racks, locked enclosures) — the nano form factor prevents accidental damage and keeps installation neat.

• Use as a secondary uplink when wired networks undergo maintenance or to provide an alternate path for event notifications and status updates.

Important note: this dongle is not intended to act as a general Wi‑Fi bridge for IP cameras. If camera wireless connectivity is required, confirm whether your recorder firmware supports tethering camera traffic through the dongle — many setups expect cameras to be wired or handled by a dedicated wireless solution.

Comparisons with similar products

There are many USB Wi‑Fi adapters on the market, but the DS‑3WR3X‑1 differs in several important ways because it is a recorder accessory rather than a consumer PC dongle.

• Consumer adapters often advertise higher raw throughput and dual‑band support (2.4/5 GHz). The DS‑3WR3X‑1 focuses on reliable 2.4 GHz connectivity and recorder compatibility; its certified data rate to the DVR is up to 20 Mbps rather than multi‑hundred Mbps marketing figures aimed at PCs.
• Driver support: consumer adapters require drivers for many operating systems. The Hikvision dongle is driver‑free with supported recorders, simplifying deployments and reducing firmware/driver mismatches.
• Physical design: the nano form factor is optimized for discreet recorder installations, whereas some consumer adapters have external antennas that add bulk and can be fragile in rack environments.

• Dedicated wireless bridges or extenders can carry multiple camera streams and offer higher throughput and advanced management features. The DS‑3WR3X‑1 is a lightweight option for recorder uplink and is not intended as a full site wireless bridge.
• Cost and simplicity: the dongle is very low cost (suggested retail price around $8.99) and easy to deploy, making it a practical choice for basic connectivity needs or temporary use.

In short, choose the DS‑3WR3X‑1 when you need a compact, supported wireless uplink for a Hikvision recorder — choose more capable bridges or dual‑band adapters if you require heavy throughput, multi‑camera wireless streaming, or advanced RF management.

Customer feedback and typical user impressions

Direct public customer reviews for this specific Hikvision dongle may be limited because it is primarily sold as an installer/recorder accessory rather than a consumer retail item. From integrator and installer feedback on similar recorder‑specific dongles, common observations include:

• "Easy to install" — installers appreciate the plug‑and‑play behaviour with supported recorders and the lack of driver hassles during commissioning.
• "Neat, low profile" — the nano form factor reduces the risk of accidental damage in crowded racks or on DVR front panels.
• "Good for backups and temporary sites" — integrators commonly use such dongles as a temporary uplink during installations or as a fallback path during network maintenance.
• "Check compatibility first" — some users find that recorder firmware versions affect functionality; confirming compatibility before purchase avoids surprises.

If you are buying for a professional installation, sourcing the dongle through authorised channels ensures firmware support and access to manufacturer guidance — a frequent recommendation from installers who prefer predictable behaviour and warranty coverage.

Pricing, warranties and procurement notes

The DS‑3WR3X‑1 is positioned as an economical accessory with a suggested retail price around $8.99 and a supplier cost of approximately $4.27. Warranty support may vary by region and reseller; in some channels the product is supplied without a manufacturer warranty (warranty=0). For professional projects, purchase through authorised Hikvision distributors to ensure access to firmware updates, technical support and warranty coverage where available.

Conclusion: why the DS‑3WR3X‑1 is a practical choice

The Hikvision DS‑3WR3X‑1 Nano USB Wi‑Fi Dongle is a focused, cost‑effective accessory for situations where a recorder needs a simple wireless uplink. Its strengths are its compact form factor, plug‑and‑play compatibility with supported Hikvision recorders, and Wi‑Fi 6 single‑band operation that helps in congested 2.4 GHz environments. While it is not meant to replace dedicated wireless bridges or to provide camera‑level wireless access, it fills a clear niche for installers and system integrators who need a tidy, low‑cost solution for temporary setups, backup uplinks, or installations where running ethernet is not feasible.

Before purchasing, confirm your recorder model and firmware compatibility, plan for the device’s environmental limits, and, if long‑term support is important, buy via authorised channels to secure firmware updates and any available warranty coverage. For many deployments, the DS‑3WR3X‑1 offers exactly the simplicity and reliability you need to put a recorder onto the network quickly and unobtrusively.