Introduction: what the Ruijie RG-NBS5300-8MG2XS-UP is and why it matters
Ruijie RG-NBS5300-8MG2XS-UPis a compact, cloud-managed Multi‑Gig Layer‑3 access switch designed for modern networks that demand high power and high throughput at the network edge. It combines eight multi‑gigabit RJ45 access ports capable of 10/100/1000/2500Base‑T with full PoE++ support, two 10G SFP+ uplinks and enterprise L2/L3 feature sets — all managed via Ruijie (Reyee) Cloud, web GUI, CLI or SNMP. With a 370 W PoE budget and a single‑port maximum of up to 90 W, this switch is aimed squarely at environments deploying Wi‑Fi 6 access points, high‑power IoT devices and surveillance cameras where multi‑gig connectivity and centralized management are important.
Key features at a glance
- 8 × Multi‑Gig RJ45 access ports (10/100/1000/2500Base‑T) with PoE++ on ports 1–8
- 2 × 10G SFP+ uplinks for high‑speed aggregation and backhaul
- 370 W total PoE budget; up to 90 W per port (single‑port maximum)
- Layer‑3 routing capabilities plus robust L2 features: VLANs, link aggregation, QoS and DHCP/IGMP controls
- Enterprise security: IP‑MAC‑Port binding, 802.1X, RADIUS, ACLs, DoS protection and storm control
- Cloud management for zero‑touch provisioning alongside local web/CLI/SNMP options
Detailed specifications and the benefits they deliver
The RG‑NBS5300‑8MG2XS‑UP brings a focused set of hardware and software features that address a common set of requirements for small and midsize deployments. Below are the most important specifications and what they mean in practice.
- 8 multi‑gig RJ45 access ports:Support for 10/100/1000/2500Base‑T gives you the ability to connect Wi‑Fi 6 access points, multi‑gig capable endpoints and 2.5 Gbps devices without the need for additional aggregation hardware. This simplifies wiring and ensures access ports won’t become a bottleneck for modern APs.
- 2 × 10G SFP+ uplinks:These provide high‑speed aggregation to the core network or to uplinked switches/routers, enabling the full multi‑gig performance of downstream devices to be carried upstream.
- 370 W PoE budget / up to 90 W per port:The large PoE budget and per‑port capability makes the switch appropriate for high‑power devices such as Wi‑Fi 6/6E APs with multiple radios, PTZ cameras, digital signage and other PoE++ equipment. The high per‑port allowance reduces the need for separate power injectors or midspan devices.
- Switching capacity:80 Gbps backplane and approximately 58.72 Mpps forwarding rate provide enough headroom for access‑layer aggregation in SMB or branch scenarios where multiple APs or high‑throughput clients connect.
- MAC and VLAN capacity:Around 16,000 MAC address entries and support for up to 4,094 VLANs enable robust segmentation for security and traffic management across multiple tenants or departments.
- Cloud and local management:Ruijie / Reyee Cloud enables zero‑touch provisioning and centralised visibility for distributed networks, ideal for multi‑site rollouts. Local web GUI, CLI and SNMP support ensure on‑prem flexibility and compatibility with existing management systems.
- Security features:IP‑MAC‑Port binding, 802.1X authentication, RADIUS integration, ACLs and DoS protection are in place to help you secure the access layer and reduce attack surface from rogue devices.
- Layer‑3 features:The switch supports routing and ARP features that allow it to perform inter‑VLAN routing at the edge for smaller networks or branch offices where a full router may not be necessary.
Use cases and scenarios where this switch excels
The RG‑NBS5300‑8MG2XS‑UP is designed for real world applications where a compact but powerful access switch is needed. Typical deployments include:
Modern enterprise APs often require multi‑gig uplinks and substantial power. This switch provides the necessary 2.5 Gbps access speeds and PoE++ power to support high‑density APs with multiple radios, especially in classrooms, conference rooms, hotels and retail locations. The two 10G SFP+ uplinks allow aggregated traffic from multiple APs to reach the wired core without congestion.
For branches that require routing at the edge, secure guest segmentation and centralized management across multiple locations, the integrated Layer‑3 features plus cloud zero‑touch provisioning make deployment and ongoing management straightforward for IT teams or resellers supporting many sites.
High-resolution cameras and some smart IoT devices demand more than standard PoE budgets. With up to 90 W per port and a 370 W total budget, this switch can power a mix of cameras and connected devices without separate midspan injectors, simplifying installation and power planning.
VLAN density, robust ACLs and authentication options make the switch suitable for environments where traffic segmentation, guest access control and secure BYOD policies are required. Cloud management helps centrally enforce configurations across multiple buildings or campuses.
How it compares with similar products on the market
When evaluating the RG‑NBS5300‑8MG2XS‑UP, it’s useful to consider two comparison axes: feature set and value for money.
Compared to legacy Gigabit PoE switches, the major advantages here are multi‑gig access ports (2.5 G support) and significantly higher PoE budget/per‑port capability. If you are deploying Wi‑Fi 6 APs or multi‑gig endpoints, a standard Gigabit switch will limit throughput and may lack sufficient power for PoE++ devices.
There are other access switches in the market offering multi‑gig ports and PoE++. What distinguishes the RG‑NBS5300‑8MG2XS‑UP is its combination of compact form factor, cloud management integration (Ruijie/Reyee Cloud) and a relatively high PoE budget for an 8‑port form factor. Compared with enterprise modular switches, it is more compact and cost‑effective for edge deployments, while modular gear remains better for very large port counts or chassis-based redundancy.
Brands such as Cisco, HPE/Aruba and Ubiquiti offer similar feature sets at various price points. Cisco and Aruba often lead on advanced enterprise features and support ecosystems; Ubiquiti emphasizes simplified centralized management for SMBs. Ruijie’s offering here is competitive when you prioritise cloud‑driven zero‑touch deployment, robust PoE++ capacity and a favourable price point — the suggested retail sits around 39/US$529 depending on reseller (check local listings), which is attractive for a fully managed multi‑gig PoE++ access switch with 10G uplinks.
Customer feedback and reviews
Public, verifiable customer testimonials for this specific model may be limited depending on the reseller channel and regional availability. That said, feedback typically sought by IT teams evaluating this class of product focuses on a few recurring themes:
- Ease of deployment and cloud zero‑touch provisioning — many IT teams appreciate being able to preconfigure devices and have them adopt policies automatically on installation.
- Power and port flexibility — integrators value the ability to power high‑wattage APs and cameras from a compact switch without extra power hardware.
- Value for money — organisations moving to Wi‑Fi 6 often find multi‑gig access switches a necessary upgrade, and cost relative to port count and PoE budget is an important consideration.
- Support and documentation — as with all networking gear, buyers weigh vendor support and local partner ecosystems when choosing a brand.
If you are considering purchasing this unit, ask your reseller for references or pilot installs in similar environments and request the official datasheet for detailed hardware limits and environmental ratings.
Conclusion: why the RG-NBS5300-8MG2XS-UP is a strong choice
The Ruijie RG‑NBS5300‑8MG2XS‑UP fills a clear niche: it is a compact, capable access switch for modern, power‑hungry edge deployments. Its multi‑gig access ports remove common bottlenecks when connecting Wi‑Fi 6 APs and multi‑gig devices, the 2×10G uplinks ensure aggregated traffic can be transported without compromise, and the 370 W PoE budget with up to 90 W per port simplifies power planning for demanding endpoints. Layer‑3 features, security controls and cloud management round out a feature set that is well suited to SMBs, branch offices, hospitality, education and retail environments.
Before purchasing, consult the official datasheet for complete mechanical, electrical and certification details, and consider a pilot deployment to validate performance for your specific use case. At a suggested price of 39/US$529 (verify local pricing), the RG‑NBS5300‑8MG2XS‑UP offers a compelling balance of performance, power and manageability for organisations making the move to multi‑gig and high‑power PoE deployments.
