2EASY CDV‑IP1B IP Video Entry Kit, PoE 7" Touch Monitor, 1‑Button Door Station, 4‑Port PoE Switch

Introduction to the 2EASY CDV‑IP1B PoE IP Video Entry Kit

The 2EASY CDV‑IP1B is a compact, plug‑and‑play PoE IP video entry kit designed for single residences and small multi‑point installations. The bundle pairs a 7" touchscreen IP monitor with a single‑button outdoor door station and a 4‑port PoE switch, giving homeowners and small installers a simple path to an IP‑based intercom system. Key selling points include PoE power for simplified cabling, mobile app support for remote answering and unlocking, a wide‑angle outdoor camera, and an expandable architecture that can grow with the site.

Key features at a glance

• PoE powered(IEEE 802.3af, Class 0) monitor and door station for single Ethernet cable installation.
• 7" touchscreen monitorwith colour TFT display and local recording/SD storage support.
• Single‑button door station(CDV‑91IP) with built‑in mic/speaker, ≈170° wide‑angle camera and IP54 weather rating.
• 4‑port PoE switch(CDV‑POE4P) with intelligent priority mode and plug‑and‑play setup.
• Mobile app supportvia VDP Connect / 2EASY for remote answering and lock control.
• Expandable— start with up to two monitors and two stations on the included switch, scale with managed/higher‑capacity switches.

Detailed specifications and benefits

The CDV‑IP1B kit includes either the CDV‑470IP or CDV‑471IP 7" touchscreen monitor, the CDV‑91IP single‑button outdoor station, and the CDV‑POE4P 4‑port PoE switch. It is positioned for single residences, duplexes or small multi‑point installations where a straightforward IP intercom solution is required. With the included switch the system supports up to two door stations and two monitors; moving to a larger or managed switch removes that cap and allows a gradual expansion strategy.

• Screen:7" colour TFT touchscreen, typically 1024 × 600 (some older variants list 800 × 480).
• Power:PoE (IEEE 802.3af, Class 0) — one cable carries power and data for a clean installation.
• Storage:Local audio/video recording with SD card support on the monitor series to capture missed visitors or events.
• Environmental range:Designed for indoor monitor operation, operating temperatures around −10 °C to +50 °C.
• Cabling:Typical PoE reach ≈100 m over Cat5e/Cat6; practical installations can extend with repeaters or higher‑grade network equipment.

• Type:Single‑button IP video station suited to single‑door or single‑apartment entry points.
• Camera:Wide/fisheye view around ≈170° for broad coverage of door approaches.
• Ingress protection:IP54 rated to withstand typical outdoor exposure.
• Lock control:One relay output for an electric strike or magnetic lock (12 V recommended), plus built‑in microphone and speaker for full‑duplex audio.
• Power & cabling:PoE power, with practical maximum cabling distances around 100 m for standard PoE; the vendor notes extended modes up to longer distances on the switch in special cases.

• Ports:Four PoE ports to power monitor(s) and station(s).
• Standard:IEEE 802.3af (Class 0).
• Power management:Intelligent priority mode protects higher priority ports if total available power is exceeded — useful where multiple devices with different priorities are attached.
• Installation:Plug‑and‑play design for rapid deployment; vendor documents reference extended transmit options (up to 250 m in special modes) though typical deployments use standard PoE distances.

• Faster installs:PoE reduces cable runs and eliminates separate power supplies at the monitor and door station.
• Cleaner aesthetics:One Ethernet cable per device keeps walls and conduits tidy, which is valuable in retrofits and visible interior spaces.
• Mobile convenience:Answer calls and activate locks remotely via the VDP Connect / 2EASY mobile app — useful for deliveries, service calls and remote property management.
• Scalability:Start with the compact kit and expand to more monitors or stations by adding a managed PoE switch as needs grow.
• Local recording:SD support on the monitor gives immediate on‑site storage without the need for a NVR for basic event capture.

Use cases and scenarios where the kit excels

• Single‑family homes:Homeowners who want a modern touchscreen intercom, mobile answering and a weatherproof outdoor station with a wide field of view.
• Small apartment or duplex buildings:Where each unit needs a single‑button entry point and a local monitor, and where installers prefer PoE for simplicity.
• Renovations and retrofits:Projects where running a single Ethernet cable is easier than installing separate power circuits or additional conduit runs.
• Holiday homes / second properties:Remote answering and lock control via the mobile app makes it convenient to allow access for cleaners or short‑term service providers.
• Small commercial or office reception:Reception desks that require a simple, intuitive monitor and a single external entry point for visitors or deliveries.

How the CDV‑IP1B compares to other options on the market

When evaluating entry systems, buyers commonly weigh IP PoE kits like the CDV‑IP1B against three typical alternatives: legacy analogue/video door entry systems, high‑end managed IP platforms, and single‑vendor smart‑home solutions.

Analogue video intercoms often require separate power cabling and proprietary two‑wire buses. The CDV‑IP1B’s PoE approach simplifies wiring and integrates smoothly into modern IP networks. Analogue systems may be less costly up front for very small installs, but they lack the scalability, app integration and flexible recording options of an IP kit.

Large enterprise IP intercoms (from vendors offering NVR integration, SIP trunking, or advanced access control features) are powerful but also more complex and expensive. The CDV‑IP1B sits in the affordable, easy‑to‑deploy segment — it provides core IP intercom features with the option to expand, but it does not aim to replace high‑end, fully managed access control ecosystems.

Some consumer smart‑home brands offer sleek video doorbells and ecosystem‑tied monitors. Those systems may provide excellent cloud services, but can be limited by vendor lock‑in or subscription fees. The CDV‑IP1B emphasises on‑premise capability (local recording, SD support) and professional installer familiarity while still offering mobile app features.

Customer feedback and installer impressions

There are no specific customer testimonials included with this kit description, but typical installer and homeowner feedback for this class of product highlights several recurring themes:

• Ease of installation:Installers appreciate PoE and plug‑and‑play switches for fast deployments — fewer call‑backs related to power supply failures or complex wiring.
• Good value for small sites:The bundled monitor, door station and PoE switch are seen as a practical starter kit for single homes and small multi‑unit sites.
• Mobile app convenience:Homeowners value being able to answer and unlock from their phone, especially for deliveries or when away from home.
• Expectations on camera angle:The wide ≈170° camera provides broad coverage but may introduce some fisheye distortion at the edges — installers often note that positioning and mounting height help optimise field of view.

Conclusion: Why choose the 2EASY CDV‑IP1B kit

The 2EASY CDV‑IP1B PoE IP Video Entry Kit is an attractive option for homeowners and small installers who want a straightforward, scalable IP intercom solution. Its PoE design reduces installation complexity, the 7" touchscreen monitor delivers an intuitive in‑home experience with local recording options, and the single‑button outdoor station offers robust weather protection and a very wide viewing angle. Add mobile app support and the ability to expand using larger PoE switches, and you have a flexible platform that meets the needs of single residences, small multi‑point sites and light commercial use.

For those seeking a middle ground between basic analogue door intercoms and complex enterprise platforms, the CDV‑IP1B provides a balanced combination of simplicity, features and room to grow. As always, confirm the exact monitor model (CDV‑470IP vs CDV‑471IP) to verify resolution and storage specifics, and consult the datasheet or a qualified installer for compliance, cabling and installation guidance.