Introduction to the CDVI P300RP and its key features
CDVI P300RP – Architectural surface-mounted pull handle with integrated monitored electromagnet. The P300RP combines an aesthetic, surface-mounted 400 mm aluminium pull handle with a built-in 1×300 kg monitored electromagnet. Designed for both new-build and retrofit access control projects, the unit brings together a clean architectural appearance and practical security features: monitored NO/NC feedback, fail-safe operation (unlocks on loss of power), low DC power consumption and rugged environmental protection (IP66, IK10). Its satin anodised aluminium finish (available in silver, black or bespoke RAL) and hidden fixings make it an attractive option where appearance matters as much as functionality.
- Integrated 1×300 kg monitored electromagnet (NO/NC feedback) built into a single 400 mm aluminium profile.
- Surface-mounted with hidden fixings; pre-drilled and pre-assembled for faster installation.
- Low power DC operation (12–24 Vdc) with fail-safe behaviour (unlocks on power loss) for life-safety compliance where required.
- Robust mechanical and environmental ratings: IK10 impact resistance and IP66 weather protection.
- Fire rated to EN1634 for 30 minutes (installation conditions apply—see the datasheet).
- Suggested price: 225.00 (indicative). Cost price listing: 177.35.
The CDVI P300RP suits architects, access control installers, facilities managers and specifiers who need a discrete, high-performing locking solution that preserves an architectural aesthetic. It works well for commercial buildings, public-sector entrances, retail sites and retrofits where the look of the door hardware is a priority.
Detailed description of specifications and benefits
The P300RP bundles several technical specifications that deliver practical benefits on real projects. Below is a breakdown of the principal specifications followed by the real-world advantages they provide.
- Manufacturer / Model:CDVI P300RP (Ref F0519000023, P300RP)
- Product type:Architectural pull handle with integrated electromagnetic lock
- Holding force:300 kg
- Profile length:400 mm
- Dimensions (H × W × D):400 × 105 × 63 mm
- Weight:Approximately 2.6–2.9 kg
- Finish:Satin anodised aluminium (silver), black or custom RAL
- Voltage:12–24 V DC
- Current consumption:≈ 290 mA @ 12 Vdc; ≈ 145 mA @ 24 Vdc (see datasheet)
- Signal / Monitoring:Monitored relay feedback (NO/NC)
- Fail mode:Fail-safe (unlocks on loss of power)
- Mounting:Surface-mounted, pre-drilled/pre-assembled; hidden fixings
- Suitable for:Timber, metal and glass doors; retrofit and new-build
- IP rating:IP66
- Impact rating:IK10
- Operating temperature:−40 °C to +70 °C
- Fire rating:EN1634 — 30 minutes (refer to datasheet for conditions)
- Regulatory approvals:Insufficient data in supplied spec; verify CE/UKCA and regional approvals with supplier
- Integrated solution:Having the electromagnet built into the handle reduces the number of visible components, improves aesthetics and simplifies mounting and alignment compared with separate magnet-and-handle setups.
- Monitored feedback (NO/NC):The integrated monitoring relay provides status information to your access control system so you can detect forced openings or wiring faults and log door state for audit trails and alarm management.
- Fail-safe operation:The P300RP unlocks when power is removed. This behaviour is important where emergency egress and life-safety regulations mandate doors open during power loss or fire alarm conditions. For applications that must remain locked during power failure, a fail-secure device would be required instead.
- Weather and impact resistance:IP66 and IK10 ratings mean the unit is suitable for exposed external entrances and heavy-use environments while maintaining performance in adverse conditions.
- Quick installation:Pre-drilled and pre-assembled mounting cuts installation time and reduces on-site errors. Hidden fixings preserve a clean look once installed.
- Low power draw:Typical current consumption values make the unit energy-efficient compared with some older electromagnetic locks, especially at 24 Vdc operation.
Use cases and scenarios where the P300RP excels
The P300RP is versatile across many access control scenarios, especially where aesthetics and monitored security are required simultaneously. Typical use cases include:
- Commercial office entrances:Main lobby or internal office doors that require controlled access while preserving a refined architectural appearance.
- Public buildings and institutions:Schools, museums, libraries and municipal buildings where monitored access and life-safety compliance are both priorities.
- Retail and hospitality:Storefronts, showrooms and hotel back-of-house areas where discreet security hardware is preferred over bulky surface-mounted magnets.
- Retrofit projects:When upgrading existing doors to electronic access control, the P300RP’s surface-mounted, pre-assembled design simplifies installation without extensive door modification.
- External doors in mixed-use buildings:Its IP66 rating supports external use (verify the specific environmental and installation conditions in the datasheet).
- Doors requiring monitored state feedback:Any site needing door-state monitoring for integration with building management, alarm systems or access control audit trails will benefit from the NO/NC feedback option.
Comparisons with similar products on the market
When evaluating the P300RP versus other solutions, there are a few common comparison points:
- Integrated handle vs separate magnet + handle:Many installations use a separate electromagnetic lock mounted above the door and a separate pull handle. The integrated P300RP offers a neater aesthetic and simplifies alignment and wiring by combining both functions in one unit. This tends to reduce visible hardware and can lower labour time for installation.
- Holding force:The P300RP provides a 300 kg holding force typical for single-magnet architectural handles. For heavy-duty security doors or very high-security sites, larger electromagnetic locks or multi-point locking systems with higher holding capacities (600 kg and above) may be preferred. Choose based on the risk assessment and expected door forces.
- Monitoring and electronics:The monitored relay feedback (NO/NC) is comparable to other modern electromagnets and is essential where door position and lock state must be logged. Some competing products include advanced diagnostics or integrated door-position sensors; check the datasheet if such features are required.
- Environmental ratings:IP66 and IK10 are strong protection credentials, placing the P300RP among the more robust architectural handles suitable for harsh environments. Lower-rated products may be cheaper but less suitable for external or exposed installations.
- Price and value:With a suggested price around 225.00, the P300RP is positioned as a competitive, value-focused integrated solution. Total installed cost versus separate units will vary by project, but the aesthetic and installation advantages can deliver savings in labour and finishing materials.
Customer testimonials and reviews
There are no verified public customer testimonials supplied with the product data provided here. For real-world feedback, request references from your supplier or ask for installer case studies demonstrating performance in similar installations. Typical points to seek from customer reviews include ease of installation, perceived build quality, reliability of the monitoring feedback and performance in external conditions.
- Can you provide case studies or references for similar doors or projects?
- Are there documented installations showing the unit used externally over an extended period?
- Can the supplier confirm CE/UKCA and any regional approvals required for your project location?
- Is there any manufacturer warranty or extended support available? (No warranty was specified in the supplied data.)
Conclusion: Why the CDVI P300RP is a great choice
The CDVI P300RP offers a compelling mix of form and function. By integrating a monitored 300 kg electromagnet into a slim 400 mm architectural pull handle, it delivers a discreet, contemporary finish while meeting many practical access control requirements: monitored feedback for security integration, fail-safe operation for life-safety scenarios, robust IP66 and IK10 ratings for durability, and a pre-assembled design for faster installation.
If your project requires a visually subtle locking solution that still provides reliable monitored access control and weather resistance, the P300RP is worth strong consideration. Verify the fire-rating installation conditions, regional approvals and warranty details with your supplier, and compare project-specific holding force requirements (fail-safe vs fail-secure) before final selection. For architects and installers seeking a balance between appearance, performance and installation efficiency, the P300RP is designed to meet those needs.
