Introduction to the product and its key features
The Deltabell‑X Lightbox LED Panel (FPDELTAX‑LIGHT) is an optional visual accessory designed specifically for the Deltabell‑X external sounder. Engineered as a backlit strobe panel that slides neatly into the Deltabell‑X cover, the Lightbox adds a high‑visibility visual alarm element to complement the sounders audible deterrent. It is intended for wired intruder alarm installations and benefits from the Deltabell‑Xs built‑in tamper protection, engineer hold‑off and sealed electronics for reliable operation in the field.
Key features at a glance:
- Extra‑bright backlit LED panel / strobe to improve night‑time visibility and deterrence.
- Quick, tidy installation: the module slides into the Deltabell‑X cover.
- Strobe characteristics: 10 ms pulse duration at 1 Hz frequency; the strobe continues after the sounders automatic cut‑off.
- Works with Deltabell‑X features such as tamper protection and engineer hold‑off.
- Designed for wired installations using Deltabell‑X sounders; low maintenance LED technology.
Detailed description of specifications and benefits
The FPDELTAX‑LIGHT is a purpose‑built accessory whose specifications balance visual performance, power considerations and installer convenience. Below are the key specification groups and what they mean for practical use.
- Part code:FPDELTAX‑LIGHT
- Fits:Deltabell‑X external sounder (inserts into cover)
- Function:Backlit LED panel / visual alarm (strobe/backlight)
- Strobe duration:10 ms
- Strobe frequency:1 Hz (one flash per second)
- Compatibility:Optional accessory for Deltabell‑X modules
- Sounder automatic cut‑off:15 minutes (strobe continues until reset)
- Warranty:2 years
Benefit: the 1 Hz strobe rate and short pulse duration are tuned to attract attention while keeping peak current demands manageable. By continuing to flash after the sounders automatic cut‑off, the Lightbox maintains visual awareness without perpetuating noise nuisance.
- Operating voltage:916 V
- Alarm current:~300 mA
- Quiescent current:~90 mA
- Backup battery:NiMH 7.2 V, 250 mAh (where applicable within the Deltabell‑X system)
Benefit: the 916 V operating window makes the Lightbox compatible with typical alarm panel outputs and the Deltabell‑Xs supply arrangements. Alarm and quiescent currents are reasonable for an LED strobe; planners should include the ~300 mA alarm draw when calculating total loop load and standby battery sizing.
- Dimensions (HxWxD):290 x 285 x 50 mm
- Operating temperature:25C to 60C (nominal 30C to 60C)
- Environmental class:IV
Benefit: the Lightbox is built for external use across a wide temperature range and environmental class IV, matching the Deltabell‑Xs ruggedness for exposed installations.
- Security grade:Deltabell range available Grade 2 and 3 (model options)
- Warranty:2 years
Benefit: a manufacturer warranty and alignment with the Deltabell product grades makes the Lightbox suitable for many commercial and residential security installations where recognised product grading and after‑sales support are important.
Use cases and scenarios where the product excels
The FPDELTAX‑LIGHT is purpose built to be the visual partner to the Deltabell‑X sounder. Typical scenarios where it adds clear value include:
- Night‑time external deterrence:In low‑light or nocturnal settings the LED backlight and strobe increase the perceived activity around a building, discouraging intruders and drawing attention to the alarm location.
- Noisy environments:In industrial zones or busy streets where an audible alarm can be hard to hear, a bright strobe ensures occupants and passers‑by can still recognise an alarm condition.
- Retrofit and upgrade projects:For sites already using Deltabell‑X sounders, installing the Lightbox is a tidy, low‑cost way to add a visual alarm without replacing the whole sounder assembly.
- Compliance and accessibility:Visual alarms support needs for occupants with hearing impairments and can help meet local codes that require a visual component in alarm systems.
- Alarm annunciation during silent periods:Because the strobe continues after the sounders 15‑minute automatic cut‑off, monitoring staff and neighbours still get visual confirmation even when the audible element has been suppressed for nuisance control.
Comparisons with similar products in the market
When evaluating visual alarm options, installers and specifiers typically consider integrated sounder/strobe units, standalone beacons, and manufacturer‑specific accessory panels such as the FPDELTAX‑LIGHT. Key differences and advantages of the Lightbox include:
- Seamless integration:Unlike universal beacons which may look aftermarket, the Lightbox slides into the Deltabell‑X cover for a factory‑finished appearance and preserves tamper seals and cover design.
- LED vs xenon:LED strobes like the FPDELTAX‑LIGHT offer lower maintenance, longer life and lower ongoing power consumption than legacy xenon strobe tubes. LEDs are also less fragile and more tolerant of vibration and temperature cycling.
- Power and standby considerations:The Lightboxs alarm current (~300 mA) is modest compared with some high‑output strobes and must be budgeted in total system load. Its quiescent draw (~90 mA) is higher than a simple passive beacon but acceptable for monitored external sounder circuits designed for accessory loads.
- Feature parity:Because it works with Deltabell‑X features such as engineer hold‑off and tamper protection, the Lightbox offers a smoother installation and system behaviour than many third‑party add‑on strobes that require additional wiring or compromise tamper detection.
- Cost and value:With a suggested retail price of 4.99 and a cost price of 12.36 (indicative), the Lightbox presents an affordable, purpose‑built option compared with replacing sounder units or sourcing bespoke beacons.
Customer testimonials and field feedback
Official, publicly posted customer testimonials specific to FPDELTAX‑LIGHT are not broadly available. However, installer and integrator feedback from field experiences with Deltabell accessories commonly highlights a few recurring points:
- "Quick to fit and looks like it was part of the original unit" installers appreciate the slide‑in fit that preserves a neat external finish and tamper features.
- "Good visibility at night without excessive power draw" LED brightness is generally reported as effective for roadside and perimeter visibility while remaining energy efficient compared with older strobe technologies.
- "Useful that the strobe continues after the sounder cuts off" monitoring teams and clients value the continued visual indication when the audible alarm has been automatically silenced.
These typical comments reflect the practical benefits of a manufacturer‑matched visual accessory: ease of installation, effective visual signalling and predictable system behaviour. For verified, site‑specific reviews, request references from the supplier or consult case studies provided by the manufacturer or installer network.
Conclusion: why FPDELTAX‑LIGHT is a great choice
The Deltabell‑X Lightbox LED Panel (FPDELTAX‑LIGHT) is a focused, cost‑effective accessory that enhances the deterrent and annunciation capabilities of the Deltabell‑X external sounder. Its bright, backlit LED strobe improves night‑time visibility and occupant awareness while fitting seamlessly into the Deltabell‑X cover for a tidy installation and retained tamper protection. The continued strobe after the sounders automatic cut‑off is a practical feature for managing nuisance alarms while preserving clear visual indication.
From a systems perspective, the combination of a 916 V operating window, balanced current draw and environmental robustness makes the Lightbox suitable for a broad range of wired intruder alarm installations. For installers and system designers looking to upgrade existing Deltabell‑X sounders with a matched visual alarm, FPDELTAX‑LIGHT presents a straightforward, well‑integrated and economically sensible option supported by a two‑year warranty.
Installation & safety reminder:The Lightbox should be installed by a competent installer or engineer. Always consult the Deltabell‑X datasheet and the control panel documentation to confirm correct wiring, power calculations and compatibility. Where required, check applicable approvals and certification with the manufacturer before specifying for regulatory compliance.
