Introduction to the Hikvision DS-K1109DKFB-QR and its key features
The Hikvision DS-K1109DKFB-QR is a compact, weatherproof multi-authentication access reader engineered for outdoor installations such as doors and turnstiles. It combines biometric fingerprint recognition, contactless card reading (13.56 MHz MIFARE / DESFire / FeliCa), a 12-key keypad for PIN entry and QR/barcode scanning capability (via RS-485). With IP65 protection, tamper detection and both RS-485 and Wiegand outputs (W26/W34), the DS-K1109DKFB-QR targets environments that demand flexible, multi-factor access control while remaining affordable and relatively easy to install.
Key features at a glance:
- Multi-mode authentication: fingerprint, MIFARE/DESFire/FeliCa smart cards, PIN (12-key keypad) and QR/barcode (QR via RS-485).
- Interfaces: RS-485 and Wiegand (W26/W34) for broad controller compatibility; tamper input and buzzer feedback.
- Outdoor-ready: IP65 ingress protection and wide operating temperatures (−40 °C to 65 °C).
- Biometric capacity: fingerprints up to 5,000 templates.
- Compact form factor suitable for door frames and turnstile mounting.
Detailed specifications and benefits
The DS-K1109DKFB-QR blends hardware choices and practical features that together create a versatile reader for many access-control deployments. Below is a structured review of its technical specifications followed by the practical benefits those specs deliver.
- Model:DS-K1109DKFB-QR
- Authentication:13.56 MHz MIFARE / DESFire / FeliCa; fingerprint reader (up to 5,000 templates); 12-key numeric keypad for PIN entry; QR and common barcode formats (QR via RS-485).
- Interfaces & power:RS-485; Wiegand (W26 / W34); tamper input; powered by 12 V DC; power consumption with load ≤ 14 W, without load ≤ 4 W.
- Performance:Fingerprint capacity up to 5,000 templates.
- Environment & physical:IP65 protection rating; operating temperature −40 °C to 65 °C; humidity 0–90% non-condensing; dimensions 125 × 84.5 × 18 mm; weight ≤ 1 kg (manufacturer listed).
- Barcode support:Typical formats such as Code 128, Code 39, Interleaved 2 of 5, Matrix 2 of 5, Codebar, UCC/EAN-128; QR via RS-485.
- Multi-factor flexibility:Support for fingerprint, card, PIN and QR enables single-factor or layered authentication policies. Facilities can require fingerprint+card or card+PIN depending on risk profile.
- Outdoor durability:IP65 rating and wide temperature tolerance make the reader suitable for exposed entrances, gates and turnstiles without heavy additional weatherproofing.
- Integration versatility:Native Wiegand output and RS-485 connectivity ensure compatibility with a wide range of third-party controllers and access panels, reducing integration friction for installers.
- Scalable biometrics:Up to 5,000 fingerprint templates supports small to medium site deployments such as office buildings, residential complexes and mid-sized industrial sites.
- Space-efficient footprint:Slim dimensions allow installation where space is limited — beside doors, on slim posts or at turnstile consoles.
- Operational feedback and security:Built-in buzzer gives audible confirmation and tamper input provides event signaling for physical security monitoring.
Use cases and scenarios where the reader excels
The DS-K1109DKFB-QR is designed to fit several common and specialized access-control scenarios. Its mix of biometric, card and mobile/QR capabilities means it can be tailored to each environment’s security, convenience and budget needs.
For offices requiring a balance of security and convenience, this reader allows administrators to implement fingerprint or card access during business hours and enforce two-factor authentication for sensitive areas (e.g., server rooms). The keypad enables temporary PINs for visitors or contractors without issuing cards.
In apartment complexes and gated communities, the DS-K1109DKFB-QR supports resident cards, fingerprint access for family members and QR codes for short-term guests or delivery personnel. Outdoor protection ensures reliable operation at gate posts and external doors.
The compact size and Wiegand/RS-485 outputs make it suitable for turnstile integration where space is constrained and a combination of swift card reads and biometric verification is desirable during peak transit times.
Outdoor yards, loading docks and controlled work areas benefit from the device’s rugged environmental ratings and multi-authentication options — enabling secure site access for employees and vetted contractors while tracking events centrally through an access controller.
Comparisons with similar products on the market
When evaluating the Hikvision DS-K1109DKFB-QR against alternatives, consider three common categories: single-mode readers, other multi-auth readers, and premium enterprise biometric terminals.
Compared with readers that only support cards or PINs, the DS-K1109DKFB-QR offers stronger security through biometric verification and greater flexibility for varying use cases. Single-mode readers tend to be cheaper but lack the layered security options and mobile/QR support that increase convenience and reduce credential sharing.
There are multi-authentication readers from various vendors that offer similar combinations of card, fingerprint and PIN. The DS-K1109DKFB-QR competes favorably on price and weatherproofing, while providing standard interfaces (Wiegand, RS-485) for compatibility. Selecting between options often comes down to preferred ecosystem (manufacturer controller/software), biometric algorithm accuracy and available capacities for fingerprints and card formats.
Higher-end biometric terminals may deliver larger fingerprint databases, faster on-device matching, touchless facial recognition and richer on-device log storage. Those units typically carry a higher price and larger form factor. For many door and turnstile uses, the DS-K1109DKFB-QR offers a cost-effective compromise — delivering robust outdoor performance and multi-factor options without the premium cost of full-featured enterprise devices.
Customer testimonials and reviews
Official customer reviews for this specific model may vary by region and distributor. No verified public testimonials are provided in the manufacturer's datasheet. To help illustrate the kinds of feedback integrators and end users typically report for readers of this class, below are example impressions based on common field experience (these are illustrative and not quoted from specific verified customers):
- System integrator:"Easy to wire and integrate with our Wiegand controllers; the IP65 rating was a must for gate installations."
- Property manager:"Residents appreciated the fingerprint option and the ability to issue QR codes for short-term visitors — reduced overhead compared with issuing cards."
- Site security lead:"The device gives us flexible authentication options without the cost of a full biometric terminal. Tamper alerts and audible feedback are useful for remote monitoring."
For verified testimonials, check distributor product pages or ask your vendor for references from similar deployments. Trial installations or demo units can also provide hands-on feedback before mass rollout.
Installation, compliance and practical considerations
Practical deployment notes to ensure reliable operation:
- Power and wiring:The reader requires 12 V DC. Confirm power supply sizing and distance, especially for outdoor runs. Follow Hikvision wiring guidelines for RS-485 and Wiegand connections.
- Controller compatibility:Verify your access controller supports Wiegand bit length (W26/W34) or RS-485 communication options, and confirm mapping of card IDs and fingerprint templates in the controller or management software.
- Firmware and security:Keep firmware up to date and consult Hikvision release notes for updates and security patches.
- Regulatory compliance:Confirm CE/UKCA and local regulatory requirements with your supplier or installer before purchase and installation.
Conclusion — why the DS-K1109DKFB-QR is a compelling choice
The Hikvision DS-K1109DKFB-QR offers a practical and flexible access reader solution for organizations needing multi-factor authentication outdoors. Its combination of fingerprint biometrics, smart card compatibility, keypad PINs and QR/barcode support (via RS-485) gives operators multiple credential pathways to match security policies and user convenience. IP65 protection, broad temperature tolerance and standard interfaces (Wiegand and RS-485) make it suitable for exposed doors, turnstiles and gate installations.
For integrators and facilities managers who want a compact, cost-conscious reader that supports layered authentication without the footprint and price of enterprise biometric terminals, the DS-K1109DKFB-QR represents a balanced option. Before purchasing, confirm controller compatibility, installation requirements and any warranty or support terms with your supplier to ensure the product meets your project needs.
Suggested retail price:USD 199 (suggested). For technical details, downloads and official documentation, refer to the manufacturer product page and datasheet.
