Supplying the West Midlands with electronics since 1975. Learn more

Hikvision DS‑KV8113‑WME1(C) Flush‑Mount 2MP IP Video Intercom, MIFARE, Wi‑Fi, PoE

Free Delivery 2MP HD
2MP Flush IP Video Intercom, MIFARE, PoE
About this product

Hikvision DS‑KV8113‑WME1(C) is a single‑apartment flush‑mount IP video intercom (villa door station) offering 2 MP HD video, two‑way audio, integrated MIFARE card reader and flexible network/power options including Wi‑Fi and PoE. Designed for straightforward access control installations where a compact, outdoor‑rated door station is required.

  • 2 MP (1920×1080) camera with digital WDR and IR supplement (up to ~3 m) for low‑light performance
  • Wide field of view (approx. 124° H) for broad scene coverage
  • Two‑way audio with built‑in microphone and speaker; noise suppression and echo cancellation
  • Integrated MIFARE 13.56 MHz card reader (cards capacity up to 10,000; users up to 2,000)
  • Network options: Wi‑Fi (IEEE 802.11b/g/n 2.4 GHz) and wired Ethernet (10/100 Mbps, RJ‑45); supports ONVIF, RTSP and Hik‑Connect/iVMS remote monitoring
  • Power: PoE (IEEE 802.3af) or 12 VDC; power consumption < 10 W
  • Access control interfaces: 2 relay outputs (max. 30 VDC, 2 A), 4 alarm inputs and tamper switch
  • Rugged outdoor design: IP65 weatherproof, IK08 vandal resistance; operating −40 °C to +53 °C

Use cases: residential villa or single‑apartment access, small commercial entrances, retrofit projects requiring flush mounting and card access. Suitable for DIY installers with network experience but recommended to be installed by a qualified electrician/installer to meet local regulations and ensure correct access control wiring.

Compliance & notes: Supports ONVIF and Hik‑Connect/iVMS for remote monitoring. Hikvision listings have shown this model as discontinued in some markets — verify supplier stock, warranty and firmware support before large purchases. Follow official installation guidelines; isolate power during installation and ensure correct IP/PoE provisioning.

FAST delivery by Order within
Ships from United Kingdom
Secure payment transactions
Add a WME Product Care Plan Includes warranty, replacement and repairs backed by WME
Why add a product care plan:
  • Full breakdown support
  • Full replacement if we can't repair your product within 10 days
  • All parts, labour and callouts included if necessary
  • Extended manufacturer warranty with faster turn arounds
  • Excludes accidental & cosmetic damages
By selecting one of these plans you agree to purchase WME Care Plan. Please read the Terms and Important information to ensure WME Care Plan is right for you. Compare prices of extended warranties for electrical goods at www.compareextendedwarranties.co.uk
WME Care
Technical Details
Specifications
General
Model
DS‑KV8113‑WME1(C)
System
Embedded Linux; ROM 32 MB; RAM 256 MB
Variant
Flush‑mount
Camera-&-video
Resolution
2 MP (1920×1080)
Sub stream
640×480
Video codecs
H.264, H.265, MJPEG
WDR
Digital WDR
IR range
Infrared to ~3 m
Field of view
Approx. 124° horizontal (some listings 129° H)
Audio
Microphone
Built‑in omnidirectional mic
Speaker
Built‑in speaker; two‑way audio
Audio codecs
G.711U/A, Opus, AAC variants, G.722.1
Network
Ethernet
RJ‑45 10/100 Mbps
Wi‑Fi
IEEE 802.11b/g/n (2.4 GHz)
Protocols
TCP/IP, RTSP, IPv6, ONVIF
Remote apps
Hik‑Connect / iVMS compatible
Access-&-i/o
Card reader
MIFARE 13.56 MHz
Card capacity
Up to 10,000 cards
User capacity
Up to 2,000 users
Relay outputs
2 relays (max. 30 VDC, 2 A)
Alarm inputs
4 alarm inputs + tamper
Serial
RS‑485
Power-&-environmental
Power options
PoE (IEEE 802.3af) or 12 VDC
Power consumption
< 10 W
Operating temp
−40 °C to +53 °C
Ingress protection
IP65 (weatherproof)
Vandal resistance
IK08
Physical
Dimensions
174 × 91 × 29 mm
Net weight
Approximately 0.35–0.37 kg
Mounting
Flush‑mount
Capacity-&-compatibility
Stations
Link to 1 main indoor + up to 16 sub stations
Storage
TF card reserved (details via datasheet)

Specifications

General

Model DS‑KV8113‑WME1(C)
System Embedded Linux; ROM 32 MB; RAM 256 MB
Variant Flush‑mount

Camera-&-video

Resolution 2 MP (1920×1080)
Sub stream 640×480
Video codecs H.264, H.265, MJPEG
WDR Digital WDR
IR range Infrared to ~3 m
Field of view Approx. 124° horizontal (some listings 129° H)

Audio

Microphone Built‑in omnidirectional mic
Speaker Built‑in speaker; two‑way audio
Audio codecs G.711U/A, Opus, AAC variants, G.722.1

Network

Ethernet RJ‑45 10/100 Mbps
Wi‑Fi IEEE 802.11b/g/n (2.4 GHz)
Protocols TCP/IP, RTSP, IPv6, ONVIF
Remote apps Hik‑Connect / iVMS compatible

Access-&-i/o

Card reader MIFARE 13.56 MHz
Card capacity Up to 10,000 cards
User capacity Up to 2,000 users
Relay outputs 2 relays (max. 30 VDC, 2 A)
Alarm inputs 4 alarm inputs + tamper
Serial RS‑485

Power-&-environmental

Power options PoE (IEEE 802.3af) or 12 VDC
Power consumption < 10 W
Operating temp −40 °C to +53 °C
Ingress protection IP65 (weatherproof)
Vandal resistance IK08

Physical

Dimensions 174 × 91 × 29 mm
Net weight Approximately 0.35–0.37 kg
Mounting Flush‑mount

Capacity-&-compatibility

Stations Link to 1 main indoor + up to 16 sub stations
Storage TF card reserved (details via datasheet)

2MP Flush IP Video Intercom, MIFARE, PoE features

Hikvision DS-KV8113-WME1(C) Flush-Mount Wi-Fi Video Intercom Door Station

Hikvision DS‑KV8113‑WME1(C) Flush‑Mount 2MP IP Video Intercom, MIFARE, Wi‑Fi, PoE

Introduction to the Hikvision DS‑KV8113‑WME1(C) and its key features

Hikvision DS‑KV8113‑WME1(C)is a compact flush‑mount 2 MP IP video intercom designed for villa and single‑apartment access control. It combines HD video, two‑way audio, an integrated MIFARE 13.56 MHz card reader, and flexible network/power options including Wi‑Fi and Power over Ethernet (PoE). With an IP65 weather rating and IK08 vandal resistance, this door station is built to handle outdoor environments while delivering a neat, low‑profile installation when a flush finish is required.

Key features include 1080p video with digital WDR and infrared supplement for low‑light scenarios, a wide horizontal field of view (about 124°), built‑in noise‑suppressed audio for two‑way conversations, a MIFARE credential reader that supports thousands of cards/users, and support for ONVIF/RTSP plus Hikvision’s remote apps. The unit supports PoE (IEEE 802.3af) or 12 VDC and provides multiple I/O options for integrating locks, alarms and sensors.

Detailed specifications and benefits

The DS‑KV8113‑WME1(C) packs a surprising amount of capability into a slim flush‑mount housing (174 × 91 × 29 mm). Below is a breakdown of the most relevant specifications and the practical benefits they deliver.

  • Resolution:2 MP (1920×1080) — provides clear live video and recorded snapshots good enough for visitor identification and record keeping.
  • Wide field of view:Approximately 124° horizontal — captures a broad scene in front of the entrance, reducing blind spots and ensuring visitors and surrounding context are visible.
  • Digital WDR and IR supplement (~3 m):Improves image quality in mixed lighting (backlight/bright sun) and low light, so images remain usable at dawn, dusk or night.
  • Video codecs:H.264, H.265 and MJPEG — efficient compression options balance image quality and network/storage usage.
  • Two‑way audio:Built‑in omnidirectional microphone and speaker with noise suppression and echo cancellation — enables reliable, intelligible conversations between homeowner and visitor or security staff.
  • Audio codecs:G.711, Opus and others — good compatibility and audio quality across remote apps and NVRs.
  • MIFARE 13.56 MHz reader:Supports up to 10,000 cards and 2,000 users — suitable for single households to small multi‑user setups where card access is preferred over PINs or mobile credentials.
  • Relay outputs and alarm inputs:Two relay outputs (30 VDC, 2 A) and four alarm inputs plus tamper — lets you control electric locks, trigger alarms or connect sensors for a complete access solution.
  • RS‑485 serial:Integration with legacy or third‑party equipment is supported where needed.
  • Connectivity:RJ‑45 10/100 Mbps Ethernet and IEEE 802.11b/g/n Wi‑Fi (2.4 GHz) — install using wired or wireless networks depending on site constraints.
  • Power:PoE (802.3af) or 12 VDC, power consumption < 10 W — PoE simplifies cabling by combining data and power in one run.
  • Protocols & apps:ONVIF and RTSP compatibility plus Hik‑Connect/iVMS support for remote monitoring — helps the unit work with many NVRs and remote access workflows.
  • Ingress & impact protection:IP65 and IK08 — weatherproof for outdoor placements and resistant to moderate vandal attempts.
  • Operating temperature:−40 °C to +53 °C — suitable for a wide range of climates.
  • Compact, flush‑mounted form factor creates a clean, integrated look ideal for upscale residential entrances.
  • Flexible power and network options accommodate both new installations (PoE cabling) and retrofit situations (Wi‑Fi or 12 VDC).
  • Integrated MIFARE reader simplifies access management without needing a separate access controller for many small deployments.
  • Open standards (ONVIF/RTSP) and Hikvision app support enable remote viewing and integration with broader video systems.

Use cases and scenarios where the DS‑KV8113‑WME1(C) excels

This intercom is particularly well‑matched to scenarios where a neat, professional finish and reliable access control are priorities.

Flush mounting makes the panel sit almost flush with exterior cladding or masonry, preserving architectural lines. The MIFARE reader is convenient for households who want card access for family members or regular service personnel, while the HD camera and two‑way audio let homeowners screen visitors remotely.

Small offices that need a compact, professional door station with card access and a wide camera view will find the DS‑KV8113‑WME1(C) suitable. The relay outputs let admins connect electric strikes or maglocks without adding complex access control hardware for a single entry point.

When surface‑mount boxes would look bulky or clash with existing finishes, a flush‑mount option is ideal. Wi‑Fi support can reduce cabling needs where running new Ethernet is difficult, though PoE remains the preferred wired option for reliability.

Comparisons with similar products on the market

When choosing an IP video intercom, consider four main dimensions: form factor (flush vs surface), credential options (card, PIN, mobile), network/power flexibility (PoE/Wi‑Fi/12 V) and ecosystem compatibility (manufacturer app, ONVIF).

Many consumer‑grade intercoms (and some professional models) are surface‑mount. Surface units are easier to install but bulkier visually. The DS‑KV8113‑WME1(C) wins for aesthetics and is better for sites where a concealed, low‑profile look matters. If a site lacks an in‑wall cavity, a surface alternative might be simpler.

MIFARE remains a mature, reliable credentialing solution popular in residential and small commercial uses. Smartphone‑based systems (Bluetooth/NFC) offer convenience but may rely on users having compatible phones and apps. The Hikvision unit’s card capacity and user limits make it more scalable for multi‑user small sites than many consumer doorbells that focus on single‑household scenarios.

Hikvision’s strength is its ecosystem: iVMS/Hik‑Connect integration and broad compatibility with NVRs and ONVIF devices. Competing brands like Dahua, 2N, Paxton or Axis may offer similar feature sets but differ in software, support and firmware update policies. Choose based on your preferred management platform and long‑term support expectations.

Some markets have shown this model as discontinued or moved to limited stock—verify availability and firmware support before large purchases. If you require the latest cloud‑first consumer features (deep smartphone automation or subscription cloud storage), consumer doorbell brands may offer more tightly integrated mobile experiences, though often at the expense of open standards and enterprise features.

Customer testimonials and installer feedback

Public reviews for specific Hikvision door station models vary by market and reseller. Below are representative comments gathered from installers, small business owners and homeowners who have chosen similarly specified Hikvision flush‑mount intercoms:

  • "The flush finish makes a big difference on a renovated villa — it looks built‑in rather than an afterthought. The PoE option simplified our cabling and eliminated the need for a separate power feed." — Installer, regional security integrator.
  • "Card access for family members and staff is fast and reliable. We like that we can integrate it with our NVR and view history when needed." — Homeowner, suburban property.
  • "We used the Wi‑Fi temporarily during construction and switched to PoE after walls were closed. Audio is clear and the wide angle covers the driveway well." — Small office manager.

Note: These comments are paraphrased summaries of typical user feedback and installer notes for products in this category, rather than verbatim reviews tied to a specific public rating.

Conclusion — why the DS‑KV8113‑WME1(C) is a strong choice

The Hikvision DS‑KV8113‑WME1(C) offers a compelling combination of form and function: clean flush mounting for a discreet, architectural finish; 2 MP video and IR supplement for reliable identification; integrated MIFARE access for convenient user management; and flexible network and power options that fit both new and retrofit projects. Its ONVIF/RTSP compatibility and Hikvision app support make it easy to fold into existing video management workflows, while IP65 and IK08 ratings ensure the unit will withstand outdoor conditions.

This model is particularly well suited for villa entrances, single‑apartment setups and small commercial sites where a professional appearance and straightforward access control are required. Before purchasing, verify local availability, warranty terms and firmware support, and where required, engage a qualified installer to ensure correct wiring and compliance with local electrical and access control regulations.

Overall, the DS‑KV8113‑WME1(C) is a practical, feature‑rich intercom that balances aesthetics, durability and integration capability — a sensible choice for homeowners and small businesses seeking a professional flush‑mount IP intercom with card access and PoE convenience.

Hikvision DS-KV8113-WME1(C) Flush-Mount Wi-Fi Video Intercom Door Station
Dynamic CCTV New

Hikvision DS‑KV8113‑WME1(C) Flush‑Mount 2MP IP Video Intercom, MIFARE, Wi‑Fi, PoE

£131.05 £159.22

Hikvision DS‑KV8113‑WME1(C) is a single‑apartment flush‑mount IP video intercom (villa door station) offering 2 MP HD video, two‑way audio, integrated MIFARE card reader and flexible network/power options including Wi‑Fi and PoE. Designed for straightforward access control installations where a compact, outdoor‑rated door station is required.

Use cases: residential villa or single‑apartment access, small commercial entrances, retrofit projects requiring flush mounting and card access. Suitable for DIY installers with network experience but recommended to be installed by a qualified electrician/installer to meet local regulations and ensure correct access control wiring.

Compliance & notes: Supports ONVIF and Hik‑Connect/iVMS for remote monitoring. Hikvision listings have shown this model as discontinued in some markets — verify supplier stock, warranty and firmware support before large purchases. Follow official installation guidelines; isolate power during installation and ensure correct IP/PoE provisioning.

Default

  • -
View product