Introduction to the RGL BKEX600ZL Z & L Bracket and its key features
RGL BKEX600ZL Z & L Bracket — Adjustable external bracket for 600 lb maglockis a purpose-built mounting solution for the RGL EXML600‑GATE 600 lb (280 kg) external magnetic lock. Designed to solve common mounting challenges on fences, gates and doors where direct magnet-to-frame installation is not possible, the BKEX600ZL combines a compact footprint with adjustable Z and L arms to provide the reach and offset needed in a wide range of external access-control installations.
Key features at a glance:
- Adjustable Z & L configuration for flexible mounting on inswinging and outswinging gates/doors.
- Anodised aluminium construction for corrosion resistance in external environments.
- Compact, clearly specified dimensions (Z arm = 200 mm, L arm = 222 mm) to simplify site planning.
- Designed specifically for compatibility with the RGL EXML600‑GATE 600 lb (280 kg) maglock.
- Lightweight design makes handling and installation easier—boxed weight 742 g, unboxed 642 g.
Detailed description of specifications and benefits
The BKEX600ZL is a focused accessory designed to extend the functionality and siting flexibility of the EXML600‑GATE maglock. Below are the key specifications and the practical benefits they offer:
Made from anodised aluminium, the bracket offers an excellent strength-to-weight ratio while providing a corrosion-resistant surface treatment. Anodising helps protect the aluminium from weathering, salt spray and general wear in outdoor conditions, making this bracket well-suited to exposed gate and fence environments where steel may corrode more easily.
The BKEX600ZL provides two mounting arms — the Z arm at 200 mm and the L arm at 222 mm. These dimensions allow installers to specify the offset and reach required to position the maglock clear of obstructions, align with strike plates, or clear decorative gatework. The compact physical size also makes it easier to fit within constrained spaces while still delivering the mechanical advantage of an offset mount.
This bracket has been engineered specifically for the RGL EXML600‑GATE maglock (600 lb / 280 kg). It is intended for external mounting scenarios on both inswinging and outswinging gates and doors. Use it where direct magnet mounting to a frame or post is impractical — for example, when gate profiles, decorative infill, or large post sections prevent a flush installation.
Weighing in at approximately 642 g unboxed (742 g boxed), the BKEX600ZL is easy to handle for a single installer and does not add significant weight to lighter gates and frames. The anodised aluminium construction ensures robust performance without the added bulk of steel alternatives.
Product code / SKU: BKEX600ZL. Supplier code: ITM001168. Brand: RGL. Suggested retail price: 17.99 (price may vary by seller and region). Important: this product is supplied as the bracket only — the EXML600‑GATE maglock is sold separately. Always refer to the RGL EXML600 datasheet for installation guidance, recommended fixing torque values and environmental recommendations.
Use cases and scenarios where the BKEX600ZL excels
The BKEX600ZL is specifically useful in situations that require additional reach or an offset between the maglock and the frame or strike. Typical scenarios include:
- Residential and commercial pedestrian gates where decorative or thick gate sections prevent direct magnet mounting.
- Perimeter fencing with square or round posts where the maglock needs to be offset to align with the frame or strike plate.
- Inswinging gates where a Z mounting profile allows the magnet to be positioned correctly without modifying the gate leaf.
- Outswinging gates where an L configuration provides necessary clearance and stability for the maglock.
- Retrofitting existing installations where altering the gate or frame is not desirable—using a bracket can avoid costly structural modifications.
- Weather-exposed external installations when paired with the EXML600‑GATE maglock, where corrosion resistance and durability are priorities.
Because the BKEX600ZL is lightweight and compact, it is also suitable for multi-site installers and maintenance teams who need a reliable, repeatable mounting solution that minimises on-site metalwork.
Comparisons with similar products on the market
When evaluating mounting brackets for maglocks, installers typically consider three broad categories: fixed steel brackets, adjustable aluminium brackets, and integrated mounting plates. The BKEX600ZL sits within the adjustable aluminium category and offers a compelling balance of features:
- Versus fixed steel brackets: Fixed steel brackets can be very strong but often require site-specific fabrication and can corrode unless properly treated or painted. The BKEX600ZLoffers anodised corrosion resistance without the weight penalty and with predefined, reliable offsets.
- Versus stainless steel adjustable brackets: Stainless steel provides excellent corrosion resistance and higher raw tensile properties in some cases, but stainless brackets are heavier and often more expensive. The BKEX600ZL delivers a cost-effective, lightweight option with sufficient strength for the EXML600maglockwhen used as intended and offers simpler handling on site.
- Versus integrated mounting plates or bespoke solutions: Integrated plates can reduce parts count but may not suit every gate geometry. The BKEX600ZLprovides flexibility—installers can adapt the bracket to a range of gate and frame conditions without complex fabrication.
In short, the BKEX600ZL is positioned as a practical, cost-effective middle ground: more flexible and weather-resistant than basic fixed brackets, lighter and less costly than many stainless alternatives, and simpler to deploy than custom-fabricated solutions.
Customer feedback and testimonials
There are no formal published customer testimonials included with this product listing. That said, installers and access-control professionals commonly prioritise the same attributes that the BKEX600ZL provides: simple adjustable geometry, corrosion resistance for external use, and compatibility with a known maglock size (600 lb / 280 kg). If you are considering the BKEX600ZL, seek out installer forums, distribution partners or reseller reviews for local feedback and case studies from similar installations.
If you require references or real-world case examples, contacting your supplier or RGL distributor may yield sample installations or installer recommendations in your region.
Installation notes and compliance
Important installation reminders:
- The BKEX600ZL is supplied as the bracket only. The EXML600‑GATE maglock must be purchased separately.
- Follow the RGL EXML600 datasheet for correct fixing torque, bolt grades and environmental guidance. Proper torque and fastener selection are important for safety and long-term reliability.
- Professional installation is recommended to ensure mechanical integrity and regulatory compliance—particularly where access control is part of emergency egress, safety or fire regulations.
- Check local regulatory requirements (e.g. UKCA/CE markings where applicable) and compatibility with site-specific safety standards before finalising an installation.
Conclusion: Why the RGL BKEX600ZL is a great choice
The RGL BKEX600ZL Z & L Bracket is a focused accessory that addresses a very common challenge in external access-control installations: how to mount a powerful 600 lb maglock where direct, flush mounting is not possible. With its anodised aluminium construction, clearly specified offsets (Z 200 mm / L 222 mm), light weight and direct compatibility with the EXML600‑GATE maglock, it offers a practical, weather-resistant and economical option for contractors, security integrators and facilities teams.
Whether you are retrofitting an existing gate, tackling a decorative or irregular frame, or specifying a reliable external locking system for new works, the BKEX600ZL delivers the reach and flexibility needed without unnecessary complexity. For installations where weather resistance, ease of handling and compatibility with a 600 lb maglock are priorities, this bracket is a sensible, cost-effective choice.
For best results, pair the BKEX600ZL with the EXML600‑GATE maglock, consult the RGL datasheet for installation details, and consider professional installation to ensure long-term performance and regulatory compliance.
