Introduction to the RGL EBSS02/PTE Stainless Steel Press‑to‑Exit Button
RGL EBSS02/PTE Stainless Steel Press‑to‑Exit Buttonis a compact, vandal‑resistant momentary exit switch designed for internal access‑control and egress applications. With a 22 mm stainless‑steel push button, double‑pole contacts (NO/NC), and a rated switching capacity of 4 A at 30 V AC/DC, the EBSS02/PTE offers a solid combination of mechanical durability and low‑voltage switching capability. Supplied with a high‑impact plastic surface backbox and security (Allen) screws, this product is built to withstand frequent use while helping deter tampering.
Key features at a glance
- Stainless‑steel 22 mm push button with wear‑resistant legend
- Momentary operation (push to activate)
- Double‑pole contacts (NO/NC) for flexible wiring options
- Rated output: 4 A at 30 V AC/DC
- Supplied with high‑impact plastic surface backbox; flush mounting possible
- Security (Allen) screws to discourage tampering
- Designed for internal use — not rated for external exposure
Detailed specifications and benefits
The EBSS02/PTE is designed to meet the everyday needs of access control and egress switching in commercial and residential settings. Key specifications are:
- Product code:EBSS02/PTE
- Material / finish:Stainless‑steel faceplate and button; supplied with a high‑impact plastic backbox
- Dimensions:85 × 85 × 28 mm (compact footprint for wall mounting)
- Button diameter:22 mm — large enough for reliable operation while maintaining a discreet profile
- Weight:198 g (unboxed); 240 g (boxed)
- Mounting:Surface mount supplied; flush mount by removing backbox
- Security screws:Allen key type to reduce the risk of vandalism or casual tampering
- Electrical:Double‑pole NO/NC contacts; rated for 4 A at 30 V AC/DC; momentary push operation
- Documentation:EBSS02 datasheet (reference PDF)
Benefits that arise directly from these specifications include mechanical robustness (stainless‑steel surface resists abrasion and wear), flexible wiring configurations (double‑pole NO/NC contacts allow either normally‑open or normally‑closed usage depending on system needs), and simple installation options (surface mounting for quick retrofit or removal of the backbox for a cleaner flush finish).
The 4 A @ 30 V rating makes the button appropriate for low‑voltage control circuits commonly found in access control systems, electromagnetic locks, or door controllers. The momentary (push) operation is the standard for egress applications where a single, deliberate press should send the release signal to a lock or controller.
Installation, safety and intended environment
This product is intended for internal use only. It does not carry a specified external weatherproof IP rating on the supplied datasheet, and there is insufficient data provided regarding IP, CE or UKCA markings; therefore it should not be relied upon for exposed outdoor installations without additional protective measures. Installers should follow local electrical regulations and isolate supplies before wiring. Because the unit uses low‑voltage switching, it is a suitable choice for installers working with access controllers and low‑voltage lock circuits, but it is important that a qualified person carry out or verify the installation.
Use cases and scenarios where the EBSS02/PTE excels
The EBSS02/PTE is well suited to a wide range of internal access control and egress points. Typical use cases include:
- Commercial offices and reception areas:Mounted beside internal doors, reception counters, or in corridors where staff need a reliable exit switch that withstands frequent pressing.
- Multi‑unit residential buildings:For internal doors within communal areas, managers and residents benefit from the button’s straightforward operation and tamper‑resistant fixing.
- Retail and hospitality environments:Where durability and appearance matter, stainless steel provides a professional finish while security screws help protect against vandalism.
- Contractor and retrofit projects:The supplied surface backbox simplifies installation during upgrades; the option to flush‑mount by removing the backbox helps achieve a tidier aesthetic in finish‑sensitive locations.
- Access control systems integration:Double‑pole contacts allow the same unit to be used for different control wiring strategies (e.g., integrating with either normally‑open or normally‑closed inputs on controllers), which reduces the need to stock multiple part variants.
Because it is not weatherproof, this model excels in internal corridors, internal gates, server rooms, and office suites rather than outdoor gates or exposed entryways.
How it compares to similar products
When evaluating exit buttons, installers and specifiers typically weigh durability, wiring flexibility, mounting options, and cost. Here’s how the EBSS02/PTE compares to common alternatives:
- Basic plastic push buttons:Cheaper plastic variants are often lighter and less costly, but they lack the stainless‑steel finish and vandal resistance of the EBSS02/PTE. For high‑traffic locations, plastic options can show wear faster and can be easier to tamper with.
- Illuminated exit buttons:Some exit buttons include LED illumination to aid visibility in low light. The EBSS02/PTE is non‑illuminated, which keeps cost and wiring simple; choose an illuminated model if night‑time visibility is a priority.
- IP‑rated outdoor buttons:Outdoor/bezel‑sealed stainless units carry IP ratings (such as IP65) and are designed to resist rain and dust. The EBSS02/PTE is intended for indoor use — if you need an external mounting, select a weatherproof model instead.
- Large push plates and break‑glass units:Large plates or emergency break‑glass units are used where accessibility or emergency egress overrides a small push button’s usability. The EBSS02/PTE is compact and discreet; in high‑occupancy or emergency exit routes, a larger, clearly marked device might be preferable.
On price, the EBSS02/PTE offers good value: a suggested retail price of approximately 18.99 (cost price 14.40) positions it above ultra‑cheap plastic switches but below specialized IP‑rated or illuminated stainless models. For internal installations where durability, tamper resistance, and simple low‑voltage switching are the priorities, it represents a balanced choice.
Customer testimonials and typical user feedback
There are no specific customer reviews supplied with the product information. However, common installer and end‑user feedback for units like the EBSS02/PTE typically highlights:
- Reliability in daily use — stainless hardware resists wear and retains a neat appearance in busy locations.
- Ease of installation — the supplied surface backbox simplifies retrofits and the option to flush‑mount adds flexibility.
- Security benefits — Allen key screws and a wear‑resistant legend reduce vandalism and help keep the unit legible over time.
- Appropriate electrical capacity — the 4 A at 30 V rating covers most low‑voltage access control relays and door controllers without needing separate relays in many installations.
If you are evaluating this product in a procurement environment, asking for sample installations, site photos, or direct references from other customers can provide specific real‑world feedback tailored to your sector.
Conclusion — why choose the EBSS02/PTE?
The RGL EBSS02/PTE Stainless Steel Press‑to‑Exit Button is a compact, practical choice for indoor access control and egress switching. Its stainless‑steel face, wear‑resistant legend, and security fixings make it well suited to busy internal environments where a combination of robustness and tidy aesthetics is required. With double‑pole contacts and a 4 A @ 30 V rating, it provides flexible wiring options for most low‑voltage lock and controller systems. The included surface backbox and the option to flush‑mount make it convenient for both retrofit and new‑build installations.
While it is not intended for outdoor use and lacks explicit IP weatherproofing information in the supplied datasheet, for internal applications the EBSS02/PTE offers good value for money and straightforward performance. If you need a durable, tamper‑resistant exit button for offices, residential communal areas, retail environments or similar internal locations, the EBSS02/PTE is a dependable pick.
