Texecom Premier Odyssey 2E External Sounder & Strobe, 109 dB, IP44, FCB-0001

Introduction to the Texecom Premier Odyssey 2E External Sounder & Strobe

Texecom Premier Odyssey 2E Complete (FCB-0001)is a professional wired external piezo sounder with an integrated high‑visibility strobe designed for both residential and commercial intruder alarm installations. Combining a powerful audible output of approximately 109 dB(A) at 1 m with a bright, energy‑efficient strobe, this unit is engineered to act as a strong deterrent and clear alert mechanism in outdoor environments. Housed in a weather‑resistant 3 mm polycarbonate enclosure and built to meet PD6662 / EN50131‑4 Grade 2 standards, the Odyssey 2E balances performance, durability and installer‑friendly features such as lid and wall tamper detection and Texecom’s patented Hold‑Off mode for safe servicing.

Key features at a glance

• High sound output:Approximately 109 dB(A) at 1 m for a strong audible deterrent.
• Integrated strobe:High‑brightness strobe with tube‑saver circuitry and twin alternating LEDs to maximise visual impact while protecting strobe life.
• Weather resistant:IP44 polycarbonate (3 mm) enclosure suitable for outdoor mounting.
• Anti‑tamper protection:Lid and wall tamper sensors help protect against interference.
• Installer features:Selectable SAB/SCB and low‑current modes to reduce panel draw; patented Hold‑Off mode for safe installation and servicing.
• Standards compliant:Meets PD6662 / EN50131‑4 (Grade 2), appropriate for many domestic and light commercial installations.

Detailed specifications and benefits

Understanding the technical details helps you choose the right external sounder for your needs. The Odyssey 2E’s specification set is tailored to common installation requirements while prioritising reliability and ease of servicing.

• Model:Premier Odyssey 2E (FCB-0001)
• Sound output:≈109 dB(A) at 1 m
• Supply voltage:12–16 V DC
• Quiescent current:≈18 mA (standby)
• Max operating current:≈285 mA (alarm)
• Strobe:Integrated high‑brightness strobe with tube‑saver & twin LEDs
• Tamper:Lid and wall tamper
• IP rating:IP44
• Construction:3 mm polycarbonate
• Dimensions (H×W×D):242 × 382 × 67–76 mm (approx.)
• Weight:≈1.6 kg
• Operating temperature:−25 °C to +55 °C (storage −25 °C to +60 °C)
• Standards:PD6662 / EN50131‑4 (Grade 2, Class IV environment)

• High audible output:At ≈109 dB(A), the Odyssey 2E provides a significant audible presence that helps deter intruders and attracts attention to an alarmed property. This kind of output is appropriate for perimeters, external walls and larger properties where noise needs to travel.
• Effective visual deterrent:The integrated strobe uses twin LEDs with a tube‑saver function to extend strobe life and maintain brightness. The alternating LED pattern increases visibility in daylight and night conditions.
• Weather resistance:The IP44 rating and robust polycarbonate construction mean the unit resists ingress of splashing water and is suitable for most outdoor locations when mounted correctly.
• Reduced panel draw and selectable modes:Installer‑selectable SAB/SCB and low‑current options help manage power consumption from the alarm panel—useful for systems with limited auxiliary supply or battery capacity.
• Safe installation and maintenance:The patented Hold‑Off mode allows technicians to work on the unit or the panel without triggering a full alarm output, minimising nuisance noise during servicing.
• Compliance:Meeting PD6662 / EN50131‑4 Grade 2 ensures the Odyssey 2E conforms to recognised standards for intruder alarm components, giving confidence to installers and end users about performance and reliability.

Use cases and scenarios where the Odyssey 2E excels

The Odyssey 2E is designed for professional installers and suits a range of applications. Typical scenarios include:

• Residential perimeter and detached properties:For houses with gardens, outbuildings or long driveways, the 109 dB sounder plus strobe provides a clear and immediate deterrent that can be heard and seen across a property.
• Light commercial and retail premises:Shops, small offices and workshops can benefit from a visible external bellbox that signals intrusion to staff and passersby and helps protect stock and equipment.
• Retrofit projects:The Odyssey 2E’s classic wired setup and selectable current modes make it straightforward to retrofit into existing alarm systems without overtaxing panel outputs.
• New installations by trade professionals:Installers specifying Grade 2 components for landlords, small businesses or residential clients will find the Odyssey 2E meets regulatory expectations and installation practicalities.
• Environments where tamper protection is important:Lid and wall tamper switches protect the unit from obvious tampering attempts and signal the alarm control panel if interference is detected.

How the Odyssey 2E compares with similar products on the market

External sounders and strobes come in wired and wireless variants, with different technologies (piezo, electronic tone generators), varied IP ratings and differing compliance levels. Comparing the Odyssey 2E against common alternatives helps clarify its strengths:

• Wired vs wireless sounders:Wired units like the Odyssey 2E are generally preferred for reliability and continuous power, avoiding battery replacement and radio interference issues that can affect wireless sounders. For installations where a permanent, tamper‑resistant solution is required, wired Grade 2 units remain a popular choice.
• Piezo vs electronic sirens:The Odyssey 2E uses a piezo element to deliver a loud, penetrating tone. Electronic sirens may offer more variety of tones and potentially lower power draw in some modes, but piezo devices are known for robust long‑term performance and consistent SPL (sound pressure level).
• IP rating and casing:An IP44 rating and 3 mm polycarbonate construction make the Odyssey 2E weather resistant for most outdoor placements. Some competitors offer higher IP ratings (e.g., IP65) for extreme coastal or industrial environments; if you need heavy spray or submerged protection, consider higher IP options—but for typical domestic and light commercial use IP44 is generally sufficient.
• Standards compliance:The PD6662 / EN50131‑4 Grade 2 rating positions the Odyssey 2E among mainstream professional offerings. Higher‑grade devices (Grade 3/4) exist for high‑risk premises; evaluate your risk assessment and insurer requirements before specifying a higher grade.
• Feature set and installer convenience:Texecom’s Hold‑Off mode and selectable low‑current settings give the Odyssey 2E an edge in installation convenience compared with some simpler bellboxes. For installers who value ease of commissioning and servicing, this can reduce site time and nuisance activations.

What customers and installers say

While there are no official customer testimonials included here, feedback typically reported by professional installers and end users for units like the Odyssey 2E tends to focus on a few recurring themes:

• Reliability:Installers frequently cite the robust build and consistent performance of wired piezo sounders for outdoor alarms.
• Deterrence:Homeowners often report that the combination of a loud siren and a bright strobe provides a reassuring sense of security and attracts attention effectively during alarm activations.
• Serviceability:The Hold‑Off mode and clear tamper sensing are commonly appreciated during maintenance and troubleshooting tasks, reducing accidental full alarms during work.

For prospective buyers, it’s a good idea to ask your installer for references or examples of similar installs in your area to see real‑world performance and hear direct user feedback.

Conclusion: Why choose the Texecom Odyssey 2E?

TheTexecom Premier Odyssey 2E (FCB-0001)is a solid choice for anyone specifying a wired external sounder & strobe for residential or light commercial applications. It combines a high audible output (≈109 dB) with a bright, energy‑efficient strobe in a weather‑resistant enclosure, while offering installer‑friendly features such as selectable power modes, tamper detection and a patented Hold‑Off mode for safer servicing. Compliance with PD6662 / EN50131‑4 (Grade 2) further supports its suitability for many standard alarm system installations.

Choose the Odyssey 2E if you need a dependable, standards‑compliant external bellbox that balances performance, durability and installer convenience. For extreme environmental conditions or higher security grades, evaluate specialist alternatives, but for mainstream domestic and small commercial deployments the Odyssey 2E hits the right combination of features and value.