Introduction to the DS-KD8003-IME1(B) and its key features
The DS-KD8003-IME1(B) is a 2 MP fisheye IP camera module purpose-built for multi-module outdoor door-station assemblies. Designed for residential and light-commercial video-entry systems, this Hikvision-compatible module combines a wide 1806 horizontal field of view with PoE convenience, hardened IP65 ingress protection and on-board audio for two-way communication. It packs access-control interfaces (relays, alarm inputs and exit buttons) that let it act as both a camera and a control component in integrated intercom systems.
Whether youre specifying door-station hardware for an apartment block, gated community or small commercial building, the DS-KD8003-IME1(B) aims to simplify installation and operation by providing a compact, all-in-one module that supports standard networking and video codecs, low-light performance, and robust environmental tolerance down to 60 6C.
- 2 MP fisheye / wide-angle camera— 1920D71920 main stream, offering a panoramic view ideal for covering entryways and front yards.
- PoE and 12 V DC power options— IEEE 802.3af PoE simplifies cabling and power management.
- Built-in audio— omnidirectional microphone and loudspeaker (>85 dB at 20 cm) with noise suppression and echo cancellation.
- Access-control I/O— 2 relay outputs, multiple alarm inputs, exit-button and door-contact inputs for direct control of locks and sensors.
- Rugged and weatherproof— IP65 rated and wide operating temperature range ( 60 6C to +60 6C).
- Standard network compatibility— H.264/H.265, ONVIF compliance, RTSP and common TCP/IP protocols for integration with NVRs, management software and indoor stations.
Detailed specifications and benefits
Below is a breakdown of the core specifications and what they mean in practice for integrators, installers and end users.
- Resolution:2 MP (1920D71080 main stream; 720D7480 sub). This provides a balance between image clarity and bandwidth/storage efficiency; its sufficient for facial recognition at typical door-station distances while keeping data rates modest.
- Field of view:Horizontal 1806, Vertical 966. The fisheye view captures broad scenes — ideal for monitoring a wide entrance, stairwell or pathway without multiple cameras.
- Image features:WDR, BLC and DNR with IR supplement. These features help maintain usable images across varying lighting conditions (backlit scenes, night-time) and reduce motion blur/noise in low light.
- Video compression:H.264 / H.265 / MJPEG. H.265 support reduces storage and bandwidth requirements compared to older codecs.
- Microphone:Built-in omnidirectional mic; captures speech from multiple angles around the module.
- Speaker:>85 dB (measured at 20 cm). The loud onboard speaker supports audible two-way communication even in noisy outdoor environments.
- Audio codecs:G.711, Opus, AAC. Modern codecs like Opus improve audio quality while conserving bandwidth.
- Ethernet:10/100 Mbps (RJ-45) with IEEE 802.3af PoE — single-cable networking and power simplifies installation in retrofit and new-build projects.
- Protocols:TCP/IP, RTSP, ONVIF compatibility — designed for flexible integration with third-party VMS/NVRs and Hikvision indoor monitors or management software.
- Relay outputs:2 × 30 V DC, 1 A — can directly drive electric locks or interface with relay-based access hardware.
- Inputs:4 alarm inputs, tamper alarm and door contact inputs — useful for linking sensors and creating automated entry workflows.
- Exit buttons:2 × exit button inputs and RS-485/module port for sub-module communications — allows simple door release from inside and expansion in multi-module setups.
- User & card capacity:Supports up to 2,000 users and 6,000 cards; suitable for small-to-mid sized residential or commercial properties.
- Power:PoE (802.3af) or 12 V DC, with typical power consumption ≤ 10 W — reduces the need for separate power supplies.
- Environment:IP65 ingress protection and operating temperature range from 60 6C to +60 6C make it reliable outdoors in diverse climates.
- Mechanical:Compact dimensions (98 × 99.8 × 43.9 mm) and light weight make it easy to fit into modular door-station housings.
Use cases and scenarios where the DS-KD8003-IME1(B) excels
The combination of a fisheye camera, robust audio and access-control I/O makes this module particularly effective in several common scenarios:
- Multi-tenant apartment buildings:When fitted into modular door-station panels, the wide FOV captures visitors at a shared entrance and provides clear two-way audio to confirm identity before remote unlocking.
- Gated communities and small gated businesses:Use the fisheye module to monitor an entry lane or walkway. The relays can trigger gate motors or secure doors, and alarm inputs can integrate additional sensors.
- Retail and small commercial premises:As part of an access-controlled entry assembly, the module can verify deliveries, manage staff access and monitor the front facade for after-hours incidents.
- Managed entry systems and system integrators:The PoE option and ONVIF/RTSP support make it easy to integrate into larger VMS platforms and apartment intercom systems that require central management.
- Harsh environments:IP65 rating and extended temperature range are beneficial where exposure to rain, dust and temperature extremes is likely.
Comparisons with similar products on the market
When assessing door-station camera modules, buyers typically weigh field of view, resolution, audio quality, integration options and environmental suitability. Heres how the DS-KD8003-IME1(B) stacks up against common alternatives:
- Fisheye vs narrow-angle modules:The fisheye lens provides a 1806 panoramic view, often allowing one module to replace two or three narrow-angle cameras. However, fisheye images typically require dewarping on the viewers side to present a rectilinear view, and fine facial detail at distance can be reduced compared to a closer narrow-angle camera with higher optical zoom.
- 2 MP vs higher-resolution modules:2 MP is a practical compromise: clearer than VGA and still efficient for network/storage. Higher-resolution modules (4 MP, 8 MP) deliver more detail but increase bandwidth and storage needs — for door-station purposes 2 MP is usually sufficient for visitor identification at short range.
- PoE and codec support:Many competitors offer PoE and H.265 today; the DS-KD8003-IME1(B) is competitive on these fronts. Its on-board access I/O and robust speaker are advantages over slimline camera-only modules that require separate access controllers and amplifiers.
- Weatherproofing and durability:IP65 is standard for outdoor modules, but some premium models offer IP66/IP67 or IK-rated vandal resistance. If heavy impact resistance is required, choose a vandal-resistant option or ensure the housing provides additional protection.
Customer feedback and installer impressions
While specific published customer testimonials are limited for module-level products, common themes reported by installers and system integrators working with similar Hikvision modules include:
- Easy integration:PoE power and ONVIF/RTSP support streamline deployment into existing VMS and NVR setups.
- Good audio performance:The loud speaker and omnidirectional mic simplify two-way conversations at entrances, particularly in noisy outdoor settings.
- Value for money:Installers often note that modules offering camera, audio and access-control I/O in a single unit reduce material and labor costs compared with separate components.
- Things to verify:Integrators recommend confirming firmware compatibility with the specific door-station frame or indoor monitor, and checking regulatory/warranty details with the authorised distributor before installation.
Note: For formal customer testimonials or case studies, request references and project examples from the supplier or authorised distributor. Datasheets and manuals are available from the product page and supplier resources to assist with compatibility checks and commissioning.
Conclusion: why the DS-KD8003-IME1(B) is a strong choice
The DS-KD8003-IME1(B) 2 MP fisheye IP module is a purpose-built option for integrators and specifiers who need a compact, multifunction door-station component. Its panoramic camera, robust audio, PoE convenience, and built-in access-control interfaces reduce system complexity and installation time while supporting standard network protocols for broad compatibility.
For projects where a single module must cover a wide field of view and provide reliable two-way communication plus direct lock control, this module represents a cost-effective choice. With a suggested price of 169.99 (verify local currency and availability with your supplier) and a modest power draw (≤ 10 W), it provides a strong balance of performance, integration flexibility and value.
As with any security or access-control product, plan for professional installation, confirm firmware compatibility with your indoor stations and management software, and verify regulatory markings and warranty details with your authorised distributor before purchase and deployment.
