Introduction to the Altron ACP1-150 — Key features at a glance
Altron ACP1-150 — 3.0 m fixed wall-mounted CCTV pole with 150 mm stand-offis a purpose-built solution for mounting PTZ and fixed cameras where a modest projection from a wall is required. Designed for commercial and industrial security installations, this pole combines high-tensile steel construction with a hot-dip galvanised finish to deliver durability, corrosion resistance and long service life. Its compact 150 mm stand-off gives approximately 2.0 m of clearance above the wall or roofline while keeping mounting footprints small and discreet.
Key features include a 3.0 m overall height, a standard PTZ mounting plate with 101.6 mm PCD and 8 × Ø8.5 mm holes, a maximum headload of 25 kg (approx. 0.25 m²), M25 conduit exit for neat cabling and recommendations to use stainless steel (A2) fixings. Optional finishes and accessories such as painted coatings to BS/RAL, cladding brackets and internal cabling variants make the ACP1-150 a flexible choice for many projects.
Detailed specifications and benefits
Understanding the ACP1-150 begins with its specification set — each element has been selected to balance strength, practicality and ease of installation.
- Model and type:ACP1-150, a 3.0 m fixed wall-mounted CCTV pole designed for PTZ and fixed camera installations.
- Dimensions & clearance:3.0 m overall height with a 150 mm stand-off. The design provides approximately 2.0 m of clearance above the mounting wall or roof, allowing for unobstructed camera views in many typical mounting scenarios.
- Mounting plate:Standard PTZ mounting plate with 101.6 mm PCD and 8 × Ø8.5 mm holes. This common pattern fits many PTZ heads and camera housings, reducing the need for adapter plates and simplifying installation.
- Maximum headload:Rated for up to 25 kg (approx. 0.25 m²). This headload is suitable for a broad range of PTZ cameras and housings used in commercial and industrial surveillance projects.
- Construction & finish:High-tensile steel body with hot-dip galvanised finish for robust corrosion protection. Optional painted finishes to BS/RAL are available on request for visual integration with the building or to meet specific project aesthetic requirements.
- Cabling & fixings:M25 conduit exit for tidy external cabling runs, and an internal cabling option via a bottom bracket (suffix /IC) for installations requiring concealed wiring. Fixing centres use M10 spacing (fixings not supplied); stainless steel grade A2 fixings are specified/recommended for longevity in exposed environments.
- Options & accessories:Available options include cladding brackets, capped tops, corner/capped variants and painted finishes. Consult the manufacturer datasheet for full accessory compatibility and drill templates.
Benefits derived from these specifications include straightforward compatibility with common PTZ mounts, longevity in outdoor environments thanks to the hot-dip galvanising, and flexible cabling options that meet both security and aesthetic requirements. The relatively small stand-off makes the pole ideal where minimal projection is necessary — for example, in tight urban corridors or on compact building façades.
Use cases and scenarios where the ACP1-150 excels
The ACP1-150 is tailored to practical, real-world CCTV installation scenarios. Typical use cases include:
- Commercial building façades:Where a neat, low-profile projection is needed to position PTZ cameras for street surveillance, entrance monitoring or traffic observation without excessive overhang.
- Industrial sites:Providing a durable mounting for cameras around loading bays, yard perimeters and plant areas where corrosion resistance and robust fixings are essential.
- Retail and multi-tenant developments:Mounting surveillance cameras above shopfronts and walkways where aesthetic considerations favour a modest stand-off and galvanised finish or optional painted coatings to match building colours.
- Renovation & retrofit projects:The ACP1-150 is ideal where existing walls are used and only a short projection is available — e.g., heritage façades or constrained rooftop edges.
- Combined PTZ and fixed camera applications:Its 25 kg headload supports many PTZ housings and combined fixed camera + housing setups commonly used by security installers.
Installation and safety considerations are important: the pole is designed for good brick or concrete substrates. For weak or hollow block walls, a bolted-through solution and consultation with a structural engineer is recommended. Fixings are not supplied, so installers should select appropriate stainless steel (A2) fixings for the substrate and follow the manufacturer’s datasheet for exact hole templates and compliance markings (CE/UKCA) plus local regulations.
Comparisons with similar products on the market
When evaluating the ACP1-150 against other wall-mounted CCTV poles, several comparative points stand out:
- Stand-off length:The 150 mm stand-off positions the ACP1-150 in the short-projection category. Longer stand-off poles (300 mm or more) offer increased lateral clearance for field-of-view adjustment but take up more façade space and may be less visually discreet. Choose the ACP1-150 when minimal projection and a tidy visual profile are priorities.
- Material and finish:Hot-dip galvanised high-tensile steel is a common and cost-effective choice for outdoor poles. Some competitors use stainless steel bodies for additional corrosion resistance in highly corrosive environments (coastal or chemical plants) at higher cost. The ACP1-150’s optional painted finishes allow aesthetic matching without sacrificing galvanic protection.
- Headload capacity:With a 25 kg rating, the ACP1-150 suits most PTZs and housings. For extremely heavy multi-camera housings or large domes, higher-capacity poles are available — select based on the total mass and wind load calculations for your location.
- Cabling options:The ACP1-150 offers M25 conduit exit and an internal cabling option. Some competing poles provide larger conduits or factory-integrated cable glands; consider these where bulkier cable bundles or power supplies are required.
- Price and value:The ACP1-150 typically represents a good balance of cost, durability and specification for standard commercial projects. More premium alternatives with stainless steel construction or integrated anti-vibration features will cost more but may be justified in specialised environments.
Customer feedback and testimonials
No formal customer testimonials or reviews are provided with the product brief. However, installers and specifiers commonly evaluate wall-mounted poles on durability, ease of installation and compatibility with camera mounts. Based on the ACP1-150’s specification — galvanised finish, standard PTZ mounting plate and practical cabling options — the pole can reasonably be expected to receive positive feedback in these areas from security contractors who prioritise reliable, straightforward mounting solutions.
If you require verified customer reviews, ask your supplier for references or case studies demonstrating the ACP1-150 in similar installations, or request contactable installer feedback as part of a pre-purchase evaluation.
Conclusion — Why choose the ACP1-150?
The Altron ACP1-150 3.0 m wall-mounted CCTV pole with 150 mm stand-off is a well-balanced option for installers and specifiers needing a compact, durable and compatible mounting solution for PTZ and fixed cameras. Its hot-dip galvanised high-tensile steel construction provides corrosion resistance and structural integrity, while the 101.6 mm PCD mounting plate and 25 kg headload make it broadly compatible with common PTZ heads and housings.
Practical features such as M25 conduit exit, an optional internal cabling route, and the option for painted finishes to BS/RAL add flexibility for site-specific requirements. The compact stand-off is ideal for tight spaces and discreet mounting, and the product’s accessory options (cladding brackets, capped tops and variants) help tailor installations to different architectural contexts.
In summary, the ACP1-150 offers a reliable, cost-effective and versatile mounting solution for many commercial and industrial CCTV projects. When selecting this pole, ensure suitable substrate quality, choose appropriate stainless steel fixings, consult the manufacturer datasheet for templates and compliance marks, and involve a structural engineer for installations on weak or void walls. For standard brick or concrete mountings where a modest projection is required, the ACP1-150 is an excellent choice.
