Introduction to the Altron ACC2BPLA — 6m Tilt‑Down Camera Column
Altron ACC2BPLA — 6.0 m Square‑Section Tilt‑Down Camera Column (Post‑Mount)is a purpose‑designed mounting solution for fixed and PTZ CCTV cameras where durability, security and safe ground‑level maintenance are priorities. The ACC2BPLA combines a modular square‑section construction, a hot‑dip galvanised finish and an integrated internal cableway with a tilt‑down mechanism that allows the column to be safely lowered for servicing cameras and accessories at ground level.
This product is targeted at commercial and industrial CCTV installations — perimeter security, car parks, transport hubs and other sites where regular camera servicing is required. The column’s combination of serviceability, anti‑corrosion protection and secure access features makes it a long‑life, practical choice for demanding external environments.
Key features at a glance
- Height:6.0 m square‑section modular column.
- Construction:High‑tensile steel, hot‑dip galvanised after fabrication (paint to BS/RAL colours available).
- Service access:Tilt‑down design with demountable winch for ground‑level maintenance.
- Cabling:Internal conduit/cableway for tidy, protected cabling.
- Security:Close‑fitting flush doors with heavy‑duty locks and internal padlock facility to prevent unauthorised lowering.
- Compatibility:Top mounting plate approx. 270 x 80 mm — compatible with a range of Altron top‑mount brackets (refer to datasheet for exact payload/bracket compatibility).
- Typical weight:Approximately 130 kg (site lifting/handling and specialised freight typically required).
Detailed specifications and benefits
The ACC2BPLA’s specification reflects a focus on structural integrity, long service life and safe maintenance. Key specification highlights and the practical benefits they deliver are described below.
- High‑tensile steel construction:Provides a robust support structure capable of handling typical CCTV payloads and resisting deformation under load.
- Hot‑dip galvanised after fabrication:Delivers a uniform, durable corrosion protection that is especially important for exposed outdoor sites, coastal locations or areas subject to harsh weather.
- Optional paint finish:If aesthetics or corporate colour matching is required, BS/RAL painted finishes are available over the galvanised coating.
- Modular sectional construction:Breaks the column into transportable sections to ease shipping and on‑site assembly — reduces crane/lifting needs compared with monolithic poles.
- Mounting options:Designed to be post‑mounted set in concrete; bolt‑down variants and foundation templates are commonly available from suppliers (anchor bolts and some accessories usually quoted or supplied separately).
- Weight and delivery:At roughly 130 kg, the column generally requires specialised freight and competent installers for safe handling and erection.
- Tilt‑down mechanism and demountable winch:Allows the top section carrying the camera(s) to be lowered to ground level for safe inspection and maintenance — reducing the need for access platforms or cherry pickers and lowering ongoing service costs.
- Internal padlock facility & heavy‑duty locks:Prevents unauthorised lowering and secures the internal cableway and access doors against tampering.
- Internal cableway:Protects power and data cabling from weather and vandalism, giving a neat installation and simplifying future cable changes.
The approximate top mounting plate size is 270 x 80 mm. Exact bracket compatibility and allowable payloads depend on the chosen bracket, mounting position and site wind loading. Always consult the Altron datasheet for payload capacities, bracket part numbers and foundation design. This ensures safe operation of PTZ heads and multi‑camera arrays.
Use cases and scenarios where the ACC2BPLA excels
The ACC2BPLA is well suited to a range of commercial and industrial surveillance applications where durability and maintainability are required.
- Industrial estates, utilities and distribution centres often need robust, vandal‑resistant columns with secure internal cabling. The ACC2BPLA’s galvanised finish and heavy‑duty locks make it a reliable choice for perimeter deployments.
- These environments frequently require regular maintenance and re‑aiming of cameras. The tilt‑down feature reduces operational disruption and cost by allowing ground‑level servicing.
- Modular sections and demountable winch make it practical to dismantle and relocate the column if a site changes; the galvanised finish provides corrosion resistance in remote or exposed locations.
- Where cameras must remain operational and protected, the internal cableway and padlock facility help minimise tampering risk while supporting secure mounting of PTZ and fixed cameras.
Comparisons with similar products on the market
Choosing the right camera column requires balancing cost, durability, maintenance needs and compatibility with camera systems. Here’s how the ACC2BPLA compares with other common options:
- Fixed columns are often less expensive initially but require elevated access equipment for maintenance. The ACC2BPLA commands a premium for its tilt‑down serviceability, which typically reduces long‑term operational costs.
- Telescopic hydraulic columns offer rapid raising/lowering at the push of a button and are excellent for high‑frequency deployments. However, they are mechanically more complex and usually cost more. The ACC2BPLA’s manual/demountable winch tilt‑down is simpler, highly serviceable and requires less specialised maintenance.
- Aluminium or fibre‑reinforced poles are lighter and corrosion‑resistant without galvanising, but may not match the structural rigidity and vandal resistance of hot‑dip galvanised high‑tensile steel for heavier PTZ payloads. For heavy or high‑wind sites, the steel ACC2BPLA is typically the safer structural choice.
- External cableways simplify internal access but expose cables to weather and tampering. The ACC2BPLA’s internal conduit provides better protection and a cleaner appearance, preferred on high‑security or high‑traffic sites.
Customer feedback and installer observations
There are limited formal public reviews for many specialist mounting products, and performance feedback often comes from installers and end‑users after project completion. Typical, anonymised observations from installers and system integrators who specify similar tilt‑down columns include:
- Positive:“Serviceability is a major win — lowering the head avoids costly lift hire and reduces downtime.”
- Positive:“Hot‑dip galvanising has performed well in coastal and high‑pollution sites, reducing repaint cycles.”
- Constructive:“Ensure you order the correct foundation template and winch part number — these items are often charged separately and are essential for safe installation.”
- Constructive:“At ~130 kg, handling and delivery need planning — factor in crane or mechanical assistance for safety.”
If you require specific case studies or formal testimonials for procurement, your supplier may be able to provide references from completed projects or sample installations on request.
Buyer notes, compliance and installation advice
Before purchase and installation:
- Confirm foundation templates, anchor bolt sizes and any bolt‑down vs set‑in‑concrete preferences with your supplier — these are commonly quoted separately.
- Refer to the Altron datasheet and installation manual for CE/UKCA markings, allowable payloads per bracket, wind loading tables and exact winch part numbers.
- Plan for specialised freight and competent personnel for assembly, lifting and mechanical connections. Follow local building and electrical regulations and obtain any required site approvals.
- Consider optional paint finishes if aesthetics or corporate identity is important — paint over galvanised surfaces should follow recommended surface preparation and paint systems.
Conclusion — why choose the Altron ACC2BPLA?
The Altron ACC2BPLA 6m tilt‑down camera column is a compelling solution when you need a robust, serviceable and secure mounting platform for CCTV cameras. Its hot‑dip galvanised construction delivers long‑term corrosion protection, while the modular tilt‑down design and internal cableway reduce long‑term operational costs by enabling safe ground‑level maintenance and protecting cabling from vandalism and weather.
Compared with fixed columns, the ACC2BPLA saves on maintenance time and lift hire. Compared with more complex hydraulic telescopic systems, it offers a lower‑complexity, highly serviceable alternative that is easier to maintain in the field. For sites that demand structural rigidity, secure cable management and a durable finish, the ACC2BPLA is a practical, cost‑effective choice.
For accurate payload and foundation details, pricing and available accessories include winch part numbers and top‑mount bracket compatibility, consult the Altron datasheet and speak to your supplier. Suggested retail guidance: approximately 929 (price may vary by supplier and optional extras); cost price reference 780. Exact site requirements, additional accessories and delivery logistics should be confirmed at quotation stage.
Overall:If your project needs a durable, secure and maintainable post‑mount column for cameras — particularly where periodic ground‑level servicing is required — the Altron ACC2BPLA is a strong candidate worth specifying.
