Introduction: Meet the Capture CD Dual‑Tech Ceiling Motion Detector
Capture CD (AKG-0006)is a ceiling-mounted, dual‑technology motion detector designed for professional intruder alarm systems. Finished inMidnight Black, it combines a 360° quad‑element PIR with K‑band microwave sensing to deliver high catch performance while reducing false alarms in busy indoor environments. Built to the EN50131‑2‑4 Grade 2 standard and offering installer-friendly features such as front‑loaded electronics and selectable operating modes, the Capture CD is aimed at contractors, security installers and facilities managers who need reliable, full‑room coverage from a ceiling‑mounted device.
Key features at a glance
- Dual‑technology detection:Quad PIR + K‑band microwave for enhanced false‑alarm immunity.
- 360° ceiling coverage:Designed specifically for ceiling mounting to provide full room detection.
- Selectable modes:Low Sensitivity, PetWise, CloakWise and Dual Tech options for flexible installation environments.
- Installer-friendly design:Front‑loaded electronics simplify wiring and commissioning; tri‑colour LED and tamper options assist diagnostics.
- Compliance:EN50131‑2‑4 Grade 2 (PD6662 references) — suitable for Grade 2 intruder systems.
- Typical mounting range:2.4–3.6 m with detection ranges reported between 8 m (manufacturer) and up to 9.3 m on some reseller pages.
Detailed specifications and benefits
The Capture CD is engineered to balance sensitivity with false‑alarm rejection. At its sensor core it uses a quad‑element passive infrared (PIR) array that provides reliable motion detection of thermal changes across a 360° ceiling field. Complementing the PIR is a K‑band microwave module: the two technologies work together (dual‑tech) so that only movement detected by both sensors triggers an alarm when Dual Tech mode is enabled. This dramatically reduces nuisance alarms caused by lighting changes, HVAC drafts or temperature drift that can affect single‑technology detectors.
Benefits of this architecture include:
- Improved catch performance:The PIR array gives strong detection of human movement while the microwave helps maintain coverage in blind spots and through minor obstructions.
- False‑alarm immunity:Selectable modes allow installers to tune performance for the environment — PetWise for locations with small animals, CloakWise to manage slow, low‑contrast movement, and Low Sensitivity for areas prone to triggers.
- 360° room coverage:Ceiling mounting eliminates directional gaps typical of wall sensors and is ideal for open plan spaces and retail floors where full‑room surveillance is required.
- Commissioning speed:Front‑loaded electronics and clear tri‑colour LED status indication make wiring and on‑site adjustments faster and less error‑prone, reducing installation time.
- Standards compliance:Built to EN50131‑2‑4 Grade 2 it meets the expectations of many commercial and residential systems where Grade 2 protection is specified.
Use cases and scenarios where Capture CD excels
The Capture CD is purpose‑built for ceiling installation and excels where full, unobstructed room coverage is needed. Practical applications include:
- Retail environments:Shop floors, showrooms and convenience stores benefit from ceiling coverage that monitors aisles and open spaces without the blind spots that wall sensors can leave behind.
- Open‑plan offices and commercial interiors:Large meeting rooms, co‑working spaces and open plan offices often require a detector that covers the whole area from the ceiling for consistent response.
- Residential properties with vaulted ceilings or central ceiling access:For multi‑room living spaces or properties with an open layout, a ceiling detector can offer neater, less obtrusive coverage.
- Service corridors and storage areas:Where ambient changes from equipment or HVAC could deceive single‑tech detectors, the dual‑tech approach reduces false alarms while keeping detection reliable.
- Installations with pets or slowly moving objects:Using PetWise and CloakWise modes helps prevent nuisance activations in environments where animals or slow, low‑contrast movement might otherwise trigger alarms.
Comparisons with similar products in the market
When comparing the Capture CD to other ceiling motion detectors, consider three key dimensions: sensing technology, coverage pattern, and installability.
Many ceiling detectors rely on PIR only; these can be sensitive and cost‑effective but are sometimes prone to nuisance alarms in environments with variable temperature or nearby equipment. The Capture CD’s dual‑tech approach gives it an edge in false‑alarm rejection compared with PIR‑only ceiling units.
Some competitors use different microwave frequencies or fewer PIR elements. The quad PIR design in the Capture CD provides finer detection granularity around the ceiling perimeter, improving the sensor’s ability to register small but meaningful thermal signatures across the full 360° field. K‑band microwave offers a good compromise of range and sensitivity for indoor dual‑tech systems — alternative microwave bands may offer slightly different propagation characteristics, but K‑band is widely used and well understood by installers.
On installation, the Capture CD’s front‑loaded electronics and tri‑colour status LED make on‑site commissioning quicker than models requiring rear access or more complex setup procedures. For installers prioritising quick deployment and reliable tuning, the Capture CD typically compares favourably with both single‑tech ceiling units and some dual‑tech units with more complex wiring or calibration needs.
Price is another factor. With a suggested retail price around 59.99 (contact your reseller for local pricing and currency), Capture CD lands in the mid‑range segment — more expensive than basic PIR ceiling detectors but competitive for a dual‑tech, Grade 2 compliant device. For projects that value reduced downtime from false alarms and straightforward commissioning, the incremental cost is often justified.
Customer feedback and installer impressions
While there are no formal customer testimonials provided here, typical feedback from installers and resellers for devices like the Capture CD includes praise for:
- Ease of installation:Front‑loaded electronics and clear LEDs make wiring and fault finding faster on site.
- False‑alarm reduction:Dual‑tech operation and selectable modes reduce call‑outs and support long‑term system reliability.
- Ceiling coverage:End users appreciate the unobtrusive aesthetic and the full‑room coverage that removes blind spots.
Constructive remarks commonly suggest confirming the detection range required for a specific project (manufacturer lists 8 m; some reseller pages list up to 9.3 m) and ensuring installers follow the manufacturer manual for optimal placement at 2.4–3.6 m mounting heights. As with any detector, best practice commissioning and sensitivity selection are critical to achieving expected performance.
Conclusion: Why Capture CD is a solid choice
The Capture CD (AKG‑0006) dual‑tech ceiling motion detector is a practical, well‑engineered option for projects that demand reliable full‑room coverage with strong immunity to nuisance alarms. Its combination of quad PIR and K‑band microwave sensing, selectable operating modes, Grade 2 compliance and installer‑friendly features make it especially suitable for retail spaces, open plan offices, commercial interiors and residential installations where ceiling mounting is preferred.
For installers and system specifiers balancing performance and cost, the Capture CD offers a competitive mid‑range solution that helps reduce false alarms, simplifies commissioning and delivers the convenient 360° coverage only possible from a ceiling‑mounted design. Confirm the preferred detection range for your store listing (8 m vs 9.3 m) and follow the Texecom installation manual to ensure the unit performs to expectations.
Suggested retail price:59.99 (confirm local pricing). For full technical details, downloads and installation guidance consult the manufacturer datasheet and Texecom product page.
