Introduction to the DS-K1T502DBWX-C and its key features
DS-K1T502DBWX-Cis a purpose-built outdoor access control terminal that combines a 2 MP camera, multi-factor card authentication and SIP video intercom in a vandal-resistant, weatherproof enclosure. Marketed as a 2MP Outdoor Card & SIP Intercom Terminal, it targets exterior doors, gates and industrial entrances where durability, reliable authentication and clear two-way communication are essential.
Key features at a glance:
- IP65 ingress protection and IK09 impact resistance for robust outdoor performance.
- 2 MP camera with H.264/H.265 compression and a wide field of view (HFOV 110°, VFOV 81°).
- Multi-factor authentication supporting M1 and DESFire cards with capacity for up to 100,000 cards.
- SIP video intercom with built-in microphone and speaker, plus local SD recording for event capture.
- Flexible connectivity: 10/100 Mbps Ethernet, 2.4 GHz Wi‑Fi and Bluetooth support, plus Wiegand output and RS‑485 for integration with existing access control systems.
- Wide operating temperature range (−40 °C to +70 °C) and low power consumption (12–24 VDC, ≤12 W).
Detailed description of specifications and benefits
The DS-K1T502DBWX-C is designed to deliver a strong combination of physical protection, image quality, flexible authentication and integration options. Below is a breakdown of the principal specifications and how they translate to real-world benefits.
- IP65 / IK09 housing:Rated to keep out dust and withstand water jets, plus high impact resistance to deter vandalism and accidental damage. This makes the terminal suitable for exposed mounting locations such as gate posts, perimeter fences and facility entry points.
- Wide temperature tolerance:Operating from −40 °C to +70 °C, the terminal works in cold climates, heat-exposed sites and other temperature-extreme environments without special enclosures.
- 2 MP camera:High enough resolution for facial recognition at short distances and for clear incident capture at entry points. H.264/H.265 compression reduces network bandwidth and storage use.
- Wide field of view:HFOV 110°, VFOV 81° and DFOV 122° provide broad coverage of the approach area so visitors and credentials are reliably captured.
- Local SD recording:On-board storage ensures events are recorded locally even if the network is temporarily unavailable. Check the official datasheet for supported SD card capacities.
- Card technologies:Supports M1 and DESFire cards, delivering compatibility with widely deployed credential types and higher security when using DESFire.
- Capacity:Up to 100,000 cards and 300,000 events, enabling use across small sites through to large multi-door deployments.
- I/O & integration:Built-in lock output, exit button and door contact inputs, alarm in/out, tamper detection and RS-485 provide flexible wiring options. Wiegand output (Hik 26/34 bit) allows connection to third-party controllers or central panels.
- SIP video intercom:Two-way audio enables live conversations with visitors, remote verification and access granting when integrated with a SIP-enabled phone system or video management platform.
- Built-in mic and speaker:Omnidirectional microphone and adjustable-volume loudspeaker support clear communications in noisy outdoor conditions.
- Networking:10/100 Mbps Ethernet plus 2.4 GHz Wi‑Fi and Bluetooth allow flexible installations where wired networking is impractical or where wireless backup is desirable.
- Protocols:SIP for intercoms, RTSP for streaming and ISAPI for integration with management systems help the device fit into diverse environments and workflows.
- Power:12–24 VDC with power consumption ≤12 W keeps operational costs low and allows compatibility with common access control power supplies.
- Physical dimensions & weight:Dimension and weight data are not supplied here; installers should refer to the official datasheet for precise mounting and enclosure planning.
Use cases and scenarios where this terminal excels
The DS-K1T502DBWX-C is a versatile device suited to a range of verticals. Its combination of durability, authentication capacity and SIP intercom functionality makes it particularly valuable in the following scenarios:
- Mount at visitor gates, loading docks or secondary entrances to provide secure card-based access and visual verification via SIP when staff need to confirm identity before granting access.
- Rugged build and extreme temperature tolerance suit factory gates, cold storage facility entrances and outdoor checkpoints where both tamper resistance and wide operating temperature range are required.
- Combine card credentials with intercom calls for visitor handling at controlled community entrances. Local recording provides an audit trail for deliveries and after-hours access events.
- Wi‑Fi and Bluetooth support, along with local recording, make the terminal useful for sites where wired infrastructure is limited or where temporary control points need capability without heavy infrastructure changes.
Comparisons with similar products on the market
When evaluating outdoor access control terminals, you will often compare devices across four main axes: physical robustness, authentication flexibility, intercom/communication capability and integration options. Here is how the DS-K1T502DBWX-C stacks up.
- Physical protection:The IP65/IK09 rating places the terminal firmly in the rugged outdoor category. Cheaper indoor-rated terminals lack both ingress protection and impact resistance, limiting where they can be used.
- Authentication support:Support for both M1 and DESFire cards with a 100k-card capacity is generous for its class. Some basic outdoor readers support only one credential type or have limited capacity, making the DS-K1T502DBWX-C better suited to larger deployments.
- Intercom and audio:SIP-based intercom capability distinguishes it from readers that only perform credential verification. Where remote verification or two-way spoken exchange is required, SIP-enabled terminals reduce the need for separate intercom hardware.
- Integration:The combination of Wiegand, RS-485, and network protocols provides greater flexibility than devices limited to proprietary or single-protocol outputs. This makes integration into diverse access control architectures easier.
- Price and value:With a suggested price of $299 (cost price $200.38), the terminal offers a strong feature set for its price point. Higher-end rugged terminals with equivalent intercom functionality may command premium pricing, while very low-cost readers typically lack camera and SIP features.
Customer feedback and installer impressions
Official, attributed customer testimonials for this specific model are not provided here. However, installers and system integrators who evaluate similar Hikvision outdoor access terminals often report the following themes:
- Positive notes:Robust housing and weatherproofing are regularly highlighted as major benefits, along with the convenience of integrated SIP intercom and on-board recording. Integrators appreciate the multiple integration options (Wiegand, RS-485, Ethernet) that simplify retrofits into existing systems.
- Common cautions:As with any networked access device, correct network configuration and firmware management are important for security and reliability. Installers advise following the manufacturer’s manual for mounting, wiring and power specifications, and to confirm compliance with regional regulations.
- Deployment tips:Test Wi‑Fi range in situ before relying on wireless connectivity, provision a suitable SD card for local storage, and verify that the chosen card technology (DESFire vs M1) meets the site’s security requirements.
Conclusion: Why the DS-K1T502DBWX-C is a solid choice
The DS-K1T502DBWX-C offers a compelling mix of durability, imaging, authentication and communications features tailored for outdoor access control. Its IP65/IK09 housing and wide operating temperatures make it suitable for exposed and demanding environments, while the 2 MP camera, SIP intercom and local SD recording provide a strong operational feature set for security, visitor handling and incident recording.
For installers and site owners seeking an integrated solution that reduces the need for separate outdoor cameras, intercoms and readers, this model presents a practical and cost-effective option. With broad credential support, extensive event and card capacities and multiple integration interfaces, it fits small-to-large deployments where reliability and flexibility matter.
Before purchase and installation, consult the official datasheet for dimensions, mounting details and supported SD card capacities, confirm regional compliance and consider professional installation for lock wiring and mains-related tasks. Priced at a suggested $299, it balances capability and value for many outdoor access control applications.
