Introduction to the Hikvision 1TB SATA SSD (Mixed Use)
The Hikvision Hikstorage 1TB SATA SSD (supplier code ITM005031) is a 2.5" SATA III solid-state drive optimised for mixed-use environments — combining everyday consumer tasks with surveillance and onboard/video-edge applications. Representing the Hikstorage / E100 family, this 1TB drive uses 3D TLC NAND and supports standard SSD features such as TRIM and S.M.A.R.T. Its representative performance figures reach up to ~560 MB/s sequential read and ~500 640 MB/s sequential write (1TB representative), while endurance and reliability characteristics (typical for the family) make it an attractive option for DVR/NVR systems, embedded devices, and general desktop/storage upgrades.
Key Features at a Glance
- Capacity:1 TB (1024 GB)
- Interface:SATA III (6.0 Gb/s), 2.5" form factor (7 mm)
- NAND:3D TLC for balanced performance and cost
- Performance:Up to ~560 MB/s sequential read and ~500 620 MB/s sequential write (representative)
- Endurance & reliability:Representative TBW ≈480 TBW and MTBF ≈2,000,000 hours
- Firmware & features:TRIM, NCQ, S.M.A.R.T. support
- Optimised use:Mixed consumer and surveillance / onboard scenarios
Detailed Specifications and Benefits
This section breaks down the key specification areas and explains what they mean in practical terms.
- Capacity:1 TB (1024 GB) — ample space for operating systems, applications, and surveillance footage; ideal for single-camera to multi-camera NVRs depending on retention needs.
- Interface & form factor:SATA III (6.0 Gb/s) in a 2.5" 7 mm profile — compatible with the vast majority of desktops, laptops (with an adapter where necessary), DVRs/NVRs, and embedded systems.
- Dimensions:Approx. 69.9 × 100.1 × 7.0 mm — standard 2.5" sizing simplifies installation in rack, desktop, or enclosure environments.
- Sequential read / write:Up to ~560 MB/s read and ~500 620 MB/s write (representative). These figures place the drive comfortably at SATA III limits for sustained transfers, improving boot times, application load speeds, and large file writes such as video streams.
- Random IOPS:Specific random IOPS numbers are not provided in the supplier record. Practically, mixed-use 3D TLC SATA drives deliver solid random performance for everyday tasks and concurrent read/write operations common in surveillance recording.
- TBW (Total Bytes Written):Approximately 480 TBW (representative for 1TB E100). This level of endurance is suitable for many mixed-use deployments, including continuous recording in moderate-camera-count NVR systems.
- MTBF:Approximately 2,000,000 hours (representative), indicating a design emphasis on durability and long service life under typical operating conditions.
- Firmware features:TRIM and S.M.A.R.T. support help maintain performance over time and allow monitoring of drive health, which is particularly valuable in always-on surveillance environments.
- Operating temperature (representative):0 °C to 70 °C — broader tolerance than some consumer SSDs, useful for DVR/NVR enclosures and onboard/vehicle use where temperatures vary.
- Power consumption (representative):~1.6 63.5 W depending on activity — typical for SATA SSDs and suitable for low-power systems and 24/7 recording appliances.
Use Cases and Scenarios Where the Drive Excels
The Hikvision 1TB SATA SSD is designed to be versatile. Below are common deployments and why the drive is a good fit for each.
- As a system or secondary drive, the 1TB capacity lets users store operating systems, applications, games, and media while benefiting from snappy boot times and fast application loads.
- Typical consumer workloads — browsing, media playback, light content creation — are handled comfortably by modern SATA SSDs using 3D TLC NAND.
- Specifically optimised for mixed surveillance workloads, the drive handles continuous writes from camera streams while still offering good read response for playback. The representative TBW and MTBF figures indicate suitability for multi-camera setups with moderate retention requirements.
- Its operating temperature range and SATA compatibility make it easy to integrate into existing DVR/NVR hardware.
- For in-vehicle recorders or edge devices, the drive’s tolerance for varied temperatures and low power draw are beneficial. While shock/vibration specs are not provided in the supplier record, the 2.5" form factor and representative environmental ratings suit many embedded deployments; verify model-specific shock/vibration data before critical installations.
- Appliances requiring reliable storage for logs, analytics, or local caches (e.g., gateways, digital signage) benefit from the balance of cost, endurance, and feature support in this drive family.
Comparisons with Similar Products
Context helps when choosing storage. Below are high-level comparisons with well-known SATA SSDs to position the Hikvision 1TB mixed-use drive.
- Performance:Both can hit SATA limits on sequential transfers; Samsung models often provide stronger validated random IOPS figures and polished firmware optimisations for consumer use.
- Endurance:Samsung’s consumer drives (like 870 EVO) have competitive TBW ratings; the Hikvision representative TBW (~480 TBW) is solid for mixed workloads but always confirm model-level TBW if endurance is critical.
- Use case:Samsung is a top consumer choice for desktops/laptops; Hikvision brings targeted surveillance/embedded emphasis.
- Crucial and WD Blue are strong mainstream consumer options delivering reliable performance and good warranty support. The Hikvision drive aims for a niche between consumer and surveillance use — attractive where continuous writes and environmental tolerance are needed.
- Warranty and documented shock/vibration specs from Crucial/WD may be more explicit; verify Hikvision model documentation when designing mission-critical systems.
- Some vendors offer SSDs explicitly branded and specified for surveillance with endurance claims tuned for constant write streams and higher camera counts. The Hikvision representative figures and feature set show it is competitive for many surveillance needs, but for high-camera, high-retention enterprise deployments you should review model-specific TBW and workload ratings.
Customer Testimonials and Installer Feedback
The supplier record for ITM005031 does not include formal customer testimonials. However, feedback typically reported by installers and small-system integrators using Hikstorage/E100-class drives tends to emphasise the following themes:
- "Reliable for NVRs with 8 6 cameras — consistent recording and smooth playback." — installers appreciate sustained write performance for multi-stream capture.
- "Good value for the capacity and endurance level." — buyers balancing cost and longevity often choose mixed-use SSDs for mid-tier deployments.
- "Easy to swap into older DVRs and embedded devices thanks to the 2.5\" SATA form factor." — compatibility is a common plus.
Note: These represent typical installer observations for drives in this family rather than verified testimonials for the exact supplier code ITM005031. For validated customer reviews, request end-user case studies or purchase-platform feedback tied to the confirmed model number.
Important Notes on Model Identification, Compliance and Warranty
The supplier record uses the code ITM005031 but does not supply a Hikvision part number or a full spec sheet. The figures above are representative of the Hikstorage / E100 family — if ITM005031 maps to a different Hikvision SKU (for instance, an onboard/mobile variant), some values (power draw, TBW, temperature range, shock/vibration) could differ. Before large-scale procurement or mission-critical installations, request the exact supplier model number, official spec sheet, CE/UKCA compliance declarations, and warranty terms.
Conclusion: Why Choose the Hikvision 1TB SATA SSD (Mixed Use)?
The Hikvision 1TB SATA SSD (representative of the Hikstorage / E100 family) offers a practical blend of capacity, performance, and endurance tailored to mixed consumer and surveillance demands. With 3D TLC NAND, SATA III throughput that approaches the interface limits, a representative TBW of ~480 TBW, and firmware features such as TRIM and S.M.A.R.T., it suits home and small-office systems as well as DVR/NVR and many edge or onboard applications.
If you need a cost-effective 1TB SSD that is compatible with a wide range of devices and is optimised for continuous write scenarios, this Hikvision offering is worth considering. Just be sure to confirm the exact Hikvision model, detailed endurance/shock specifications, compliance markings, and warranty conditions with your supplier (ITM005031 reference) before finalising purchases — that due diligence ensures the drive you receive matches your deployment requirements.
