Introduction: Meet the Hikvision DS-K1107AMK
TheHikvision DS-K1107AMK MIFARE 13.56MHz Card Reader with 12‑Key Keypadis a compact, weatherproof access control reader designed for reliable indoor and outdoor use. Combining contactless MIFARE card reading with an integrated 12‑key keypad, multi‑protocol communications and tamper detection, it’s geared toward installations that need flexible authentication options, simple mounting and durable construction. At a suggested retail price of $64.99 (cost price $39.89), it targets installers and organizations that want a cost‑effective, professional access control endpoint without sacrificing features or environmental protection.
Key features at a glance
- MIFARE (13.56 MHz / ISO14443‑A)contactless card and fob compatibility.
- 12‑key keypad (0–9, *, #)for PIN, card+PIN or standalone PIN authentication.
- Multi‑protocol communications:RS‑485, Wiegand (W26/W34 selectable) and OSDP for integration with a wide variety of controllers and access panels.
- Weatherproof IP65 ratingfor dust and water resistance — suitable for exterior entrances and exposed mounting surfaces.
- Tamper input, built‑in buzzer and LED indicators for local status feedback and anti‑tamper monitoring.
- Low poweroperation at 12 V DC, ≤2 W and compact wall‑mount form factor.
Detailed specifications and benefits
The DS-K1107AMK packs practical technical features into a small housing (115 × 44 × 22 mm) intended for wall mounting. Below are the technical highlights and the benefits each brings to real‑world installations.
- Processor: 32‑bit — efficient handling of card and keypad inputs.
- Card frequency: 13.56 MHz (MIFARE / ISO14443‑A).
- Read distance: ≤50 mm — reliable read range for standard cards and fobs.
- Interfaces: RS‑485, Wiegand (W26/W34), OSDP — flexible integration options.
- Keypad: 12 keys (0–9, *, #) for PIN or combined card+PIN authentication.
- Indicators: Power and status LEDs plus built‑in buzzer for audio feedback.
- Power: 12 V DC, ≤2 W — suitable for common access control power supplies.
- Operating temperature: −20 °C to 65 °C; working humidity 10%–90% (non‑condensing).
- Protection: IP65 — dust tight and protected against water jets.
- Mounting: Wall mount (not for gang box installation).
- Security features: Tamper input/support, watchdog, firmware upgrade capability.
- MIFARE compatibility:Widely used in corporate, education and transit environments, MIFARE cards and fobs are affordable and easy to deploy.
- Integrated keypad:Adds PIN-only or two‑factor (card+PIN) authentication without needing a separate input device, increasing security options at the door.
- Multi‑protocol support:The inclusion of RS‑485, Wiegand and OSDP makes the reader adaptable to legacy systems (Wiegand) and more secure, modern controllers (OSDP).
- IP65 rating:Means the reader can be mounted outdoors in sheltered to exposed locations where occasional water spray or dust could otherwise be an issue.
- Tamper and feedback features:Built‑in tamper input and audible/visual status make it easier to integrate anti‑tamper alarms and provide instant user feedback at the door.
- Compact and low power:Small footprint and low power draw simplify installation and reduce operating costs — important for multi‑door deployments.
Use cases and ideal scenarios
The DS-K1107AMK is versatile and suits many common installations where reliability, weather resistance and flexible authentication are priorities. Here are typical applications where it excels.
For offices that require employee badge access with occasional PIN verification (for higher security areas), the integrated keypad removes the need for separate devices. The reader’s multi‑protocol support lets it connect to existing controllers, reducing retrofit complexity.
Campuses often use MIFARE student cards for door access and other campus services. The DS‑K1107AMK delivers durable outdoor mounting at building entries and supports PIN entry for selective areas like server rooms or administrative offices.
Industrial environments that require rugged hardware appreciate the IP65 protection and wide operating temperature range. Tamper input and audible alerts help secure loading bays, maintenance doors and staff-only zones.
In properties with mixed tenants or contractors, the ability to configure card+PIN or PIN‑only modes provides flexible access levels without changing hardware. Wiegand or OSDP compatibility makes integration with a variety of access control platforms straightforward.
Comparisons with similar products
When selecting a card reader, three key axes matter: credential technology, environmental robustness and integration flexibility. Here’s how the DS‑K1107AMK stacks up against common alternatives.
Many inexpensive readers support only Wiegand output and lack keypad or OSDP support. The DS‑K1107AMK adds an integrated keypad and OSDP, offering stronger authentication options and the possibility of encrypted, authenticated communication when OSDP is used — a significant security advantage over legacy Wiegand connections.
Older 125 kHz prox readers are common but use less secure credential formats and are more susceptible to cloning. The MIFARE (13.56 MHz) standard used by the Hikvision reader offers better credential management and is more widely accepted for modern deployments.
High‑end readers that include BLE, NFC or Wi‑Fi enable mobile credentials and advanced features but come at a higher cost and sometimes greater power/installation complexity. The DS‑K1107AMK sits in a middle ground — offering robust, proven card+PIN options, weatherproofing and flexible integration at a lower price point, making it an excellent value for many installations that do not require mobile credentialing.
Installation and compliance considerations
The DS‑K1107AMK is designed for wall mounting — not for gang box installation. Follow Hikvision’s manual for wiring detail and DIP switch configuration. Use shielded cable where recommended, especially for long RS‑485 or Wiegand runs, and ensure an appropriate external 12 V DC supply for extended cable distances. The product references CE/FCC compliance in the manual; consult the latest documentation and firmware notices on Hikvision’s site for regulatory and disposal information.
Price and value
With a suggested price of $64.99 (cost price $39.89), the DS‑K1107AMK is positioned as an affordable, full‑featured reader for professional access control systems. Its combination of MIFARE support, keypad, IP65 ingress protection and multi‑protocol compatibility gives it a strong price‑to‑feature ratio compared with both low‑cost, limited‑feature readers and much more expensive smart readers with mobile credential capability.
What users say: typical feedback
While individual experiences vary by installation, common feedback themes from installers and facility managers include:
- "Compact and easy to mount — the wall plate and wiring were straightforward and it fit well on exterior entrances."
- "The keypad is a useful addition for shared doors where card+PIN is required; it saved us from installing separate PIN pads."
- "Good weatherproofing and clear LED/buzzer feedback — it handles our warehouse environment without issues."
Note: These are representative comments based on common installer observations. For verified customer testimonials, check retailer listings or reach out to reference customers when evaluating for large‑scale deployments.
Limitations and considerations
- Mounting is limited to wall surfaces — it is not designed for gang box recessing.
- It uses MIFARE Classic/ISO14443‑A credentials — if your project requires other credential families (e.g., 125 kHz prox or specific high‑security smart card formats), confirm compatibility before purchasing.
- Warranty information should be confirmed with the seller or Hikvision; the product documentation and manufacturer site are the authoritative sources for warranty, firmware updates and compliance details.
Conclusion: Why choose the Hikvision DS-K1107AMK?
The Hikvision DS‑K1107AMK offers a balanced mix of security, durability and integration flexibility at a competitive price. Its MIFARE 13.56 MHz support and integrated 12‑key keypad provide flexible authentication modes (card, PIN, card+PIN) without adding extra devices. Multi‑protocol interfaces — including OSDP — make it suitable for modern access control systems while providing backward compatibility with Wiegand controllers. The IP65 rating and broad operating temperature range mean it’s well suited to outdoor entrances and demanding environments.
For organizations deploying or upgrading access control where cost, reliability and environmental protection are important, the DS‑K1107AMK is a practical, value‑oriented choice. As with any access hardware, confirm credential compatibility, installation requirements and warranty details for your specific project before purchase.
