RG-ES110FG-P 8-Port PoE+ Switch, 110W PoE Budget, 2 x Gigabit Uplink

Introduction: RG-ES110FG-P at a glance

RG-ES110FG-P 8-Port PoE+ Switch — 110W, 2 x Gigabitis an unmanaged desktop PoE+ switch designed for compact but power-hungry networks. With eight 10/100 Mbps PoE/PoE+ downlink ports, two gigabit uplinks, a total PoE budget of 110 W and a fanless metal chassis, this unit targets small offices, retail outlets, CCTV deployments and home-office users who need reliable power-over-Ethernet without the complexity of managed switching.

• 8 PoE/PoE+ downlink portssupporting 802.3af/at for cameras, access points and phones.
• 110 W total PoE budgetwith up to 30 W per port (vendor-stated), able to power a mix of devices.
• 2 x Gigabit uplinksfor high-speed connections to a router or aggregation switch.
• Fanless metal housingfor quiet, reliable indoor operation.
• Simple plug-and-play operation(unmanaged) with helpful PoE management features: PoE watchdog, auto-recovery and PoE extend modes.
• Compact, desktop formwith typical dimensions around 166 x 132.6 x 43 mm and a three-year warranty.

Detailed specifications and benefits

The RG-ES110FG-P combines practical hardware specs with features that matter when deploying powered devices at the network edge. Below is a concise breakdown of the major specifications and why they are useful.

• Downlink ports:8 x 10/100 Mbps RJ45 with PoE/PoE+. These are ideal for IP cameras, Wi‑Fi access points and VoIP phones where full gigabit on every powered device is often unnecessary but reliable power and stable connectivity are required.
• Uplink ports:2 x 10/100/1000 Mbps RJ45. Gigabit uplinks let you aggregate traffic to a router or core switch without creating a bottleneck, especially useful when several cameras stream video or multiple APs handle many clients.

• Standard:802.3af/at (PoE/PoE+).
• Total PoE budget:110 W. This total determines how many high-power devices you can run simultaneously; for example, several mid-power PoE+ cameras or a mix of phones and APs.
• Per-port max:Vendor states up to 30 W per port (PoE+), allowing the switch to support devices with higher power needs.
• PoE management:Watchdog and auto-recovery features help keep critical devices online by rebooting or cycling power when a device becomes unresponsive. PoE extend modes can also stretch reach in legacy or constrained cabling situations.

• Switching capacity:5.6 Gbps and an approximate forwarding rate of 4.17 Mpps — more than adequate for typical 10/100 PoE edge scenarios.
• MAC address table:≈8K entries, sufficient for small-to-medium deployments with multiple endpoint devices.
• Chassis:Fanless metal housing for quiet operation and improved longevity; suitable for offices, retail counters or camera closets where noise and dust are a concern.
• Surge protection:Vendor-listed 4 kV protection to help the switch survive transient electrical events often seen on external cabling runs.
• Operating environment:Typical indoor operating range 0 °C to 45 °C and a packaged weight around 1.22 kg for easy handling.

• AC input:100–240 VAC, so the switch can be used in many regions with a standard power cord.
• Warranty:3 years (typical reseller listing), giving reasonable assurance for small-business deployments.

Use cases and scenarios where the RG-ES110FG-P excels

Because it blends PoE+ capability, a compact fanless design and gigabit uplinks, the RG-ES110FG-P is especially strong in several real-world scenarios:

• CCTV and video surveillance:Feeding power and network to multiple IP cameras at a shopfront, small parking area or branch office. PoE watchdog/auto-recovery can help reduce manual site visits by automatically rebooting a hung camera.
• Small office and branch connectivity:Powering VoIP phones and a couple of access points while uplinks carry aggregated traffic back to the router or WAN link.
• Retail and point-of-sale environments:Quiet operation and metal construction suit customer-facing counters and stockrooms, while PoE supplies wireless APs and security devices from a single point.
• Edge and remote locations:Fanless design, surge protection and compact size make this a candidate for edge racks or cabinets where space and noise are constrained.
• Temporary or event networks:Fast plug-and-play deployment for short-term installations such as trade shows or pop-up retail with multiple APs and cameras.

How it compares with similar products on the market

The 8-port PoE+ switch category is competitive, with options from Netgear, TP-Link, Ubiquiti and others. Here are the practical ways the RG-ES110FG-P stacks up:

• Value for money:With a suggested price around $99.99 (and typical reseller pricing often competitive), the RG-ES110FG-P presents strong value compared with some branded alternatives that price similarly but may offer fewer PoE watts or lack gigabit uplinks.
• Port and power mix:Many consumer-focused 8-port switches offer PoE but only 65–80 W total. The 110 W budget of the RG-ES110FG-P provides more headroom for PoE+ devices, allowing a larger mix of cameras and APs before power limiting would occur.
• Uplinks:Dual gigabit uplinks are an advantage over models with only 100 Mbps uplinks or a single gigabit port, improving aggregation and reducing potential bottlenecks in busy camera or AP deployments.
• Build and noise:The fanless metal chassis competes well with plastic, fan-cooled devices in office or retail environments where noise and dust are concerns.
• Management:As an unmanaged switch, it lacks VLANs, QoS configuration or SNMP that managed or smart switches provide. If you need advanced traffic shaping, VLAN isolation or remote management, a managed alternative (from the same vendor or others) would be a better fit. That said, the RG-ES110FG-P can appear in Ruijie Cloud when a managed Ruijie device is present on the same network, which can ease discovery in mixed environments.

Customer feedback and typical reviews

While individual opinions vary, the type of feedback this class of product typically receives highlights a few consistent points. Below are representative snippets of customer impressions based on common reseller and integrator feedback for similar devices:

• "Easy to deploy and rock-solid for cameras — the PoE watchdog saved us a site visit when one camera froze." — Small business IT manager.
• "Good power budget for the price. We could run multiple APs and phones without worrying about running out of PoE watts." — Retail store integrator.
• "Quiet and compact. The metal case feels robust for the price point." — Home-office user.
• "Wish there were basic VLAN options, but for plug-and-play needs this is perfect." — Branch networking technician.

Note:These are representative sentiment examples reflecting common user priorities for unmanaged PoE switches and are not verbatim verified reviews from a specific public source.

Conclusion: Why choose the RG-ES110FG-P?

The RG-ES110FG-P is a practical, cost-effective choice when you need reliable PoE+ distribution without the complexity of managed switching. Its 110 W budget, eight PoE/PoE+ downlinks and two gigabit uplinks make it especially well suited for small offices, retail stores, CCTV installations and edge deployments where quiet operation and durability matter.

If your deployment requires plug-and-play simplicity, enough PoE power to support several cameras or APs, and a compact, fanless metal chassis, this switch delivers strong capabilities for its suggested price point. For environments that need advanced traffic management, VLANs or centralized management across many switches, consider comparing it with managed or cloud-managed alternatives. Otherwise, the RG-ES110FG-P offers a balanced blend of power, performance and value for many everyday PoE deployment scenarios.