Introduction to the RGL WP-EBNT/TF-1 and its key features
RGL WP-EBNT/TF-1 — Weatherproof touch-free exit buttonis a stainless-steel infrared exit switch designed for hygienic, outdoor and exposed access-control applications. Combining contactless activation with a robust IP65/IP66-rated enclosure, this unit is engineered to reduce surface contact, resist the elements, and deliver reliable request-to-exit operation for a wide range of doors, gates and automated entrances. With an adjustable proximity range (approximately 3–12 cm), adjustable relay time (0.5–20 s), and volt-free double-pole non-contact contacts, the WP-EBNT/TF-1 suits environments where durability, hygiene and flexible integration are priorities.
Detailed description of specifications and benefits
- Supply: 12/24 V DC — common for access-control hardware and easy to integrate into existing low-voltage systems.
- Current: Approximately 45 mA operating — low-power consumption suitable for continuous use.
- Contact rating: 4 A @ 30 V AC/DC (volt-free) — provides reliable switching for maglocks, electric strikes or door controllers when wired correctly.
- Contacts: Double-pole non-contact with configurable N/O or N/C behaviour — offers flexibility for different control circuits and improved safety through isolated switching.
- Relay time: Adjustable from 0.5 to 20 seconds — enables fine-tuning to match door closing times, safety requirements, or operational preferences.
- Proximity range: Adjustable approximately 3–12 cm — broad sensitivity adjustment for close-up or slightly extended reach activation while avoiding false triggers.
- Faceplate: Stainless-steel construction — corrosion-resistant, vandal-resistant and easy to clean for hygienic areas.
- Ingress protection: IP65 / IP66 — dust-tight and protected from powerful water jets or temporary immersion (depending on installation), making it suitable for external doors, canopies and washdown environments.
- Operating temperature: −10 to +70 °C — covers most indoor and outdoor climates encountered in commercial and light industrial settings.
- Dimensions: 85 × 85 × 40–50 mm (depth depends on back box) — compact footprint compatible with standard mounting arrangements.
- Contents: Supplied with stainless-steel plate, high-impact plastic back box, wiring connector, security screws, gasket, cable gland and instructions — everything needed for surface or flush mounting.
- Weight: 238 g boxed / 202 g unboxed — lightweight but robust.
- Hygiene and safety: Contactless infrared activation minimizes touchpoints, lowering hygiene risks in healthcare, food processing and public settings.
- Weather and vandal resistance: Stainless-steel faceplate and IP65/IP66 rating protect the unit from weather and rough use, extending lifecycle and reducing maintenance.
- Flexible integration: Volt-free double-pole contacts and common 12/24 V DC supply mean this exit button can be used with a wide range of access-control panels, locks and automation systems.
- Customisable behaviour: Adjustable proximity and relay timing allow installers to tune the device for door type, traffic patterns and safety interlocks.
- Complete kit: Included back box, gland and security screws make installation straightforward and reduce the need for additional hardware purchases.
Use cases and scenarios where the product excels
The WP-EBNT/TF-1 is especially suited to situations where reduced surface contact, environmental protection and reliable exit signalling are important. Typical use cases include:
- Healthcare facilities: In hospitals, clinics and laboratories, minimizing touch on exit controls helps reduce cross-contamination. The stainless-steel faceplate is easy to disinfect and withstands repeated cleaning.
- Food processing and commercial kitchens: The IP65/IP66 rating and stainless-steel surface make the unit appropriate where washdown cleaning routines and strict hygiene standards are in place.
- Outdoor entrances and gates: The weatherproof construction protects electronics from rain, spray and dust — useful for external doors, yard gates and car park barriers.
- Automated doors and high-traffic access points: Adjustable relay times and proximity range allow reliable operation with automatic doors, reducing nuisance triggers and ensuring doors remain unlocked for the correct duration.
- Public buildings and hygiene-sensitive spaces: Schools, museums, retail and transport hubs benefit from contactless operation to improve user experience and reduce surface wear.
Comparisons with similar products on the market
When evaluating exit controls, buyers typically consider mechanical push-buttons, capacitive touch buttons and infrared touch-free sensors. Here’s how the WP-EBNT/TF-1 compares in common categories:
- Vs mechanical push-buttons: Mechanical buttons are simple and inexpensive but require physical contact and are prone to wear and vandalism. The WP-EBNT/TF-1 removes the need to touch a surface and uses non-contact switching, reducing maintenance and hygiene concerns.
- Vs capacitive touch buttons: Capacitive units respond to touch and can offer sleek aesthetics, but they still require contact and can be affected by gloves or moisture. Infrared touch-free sensors like WP-EBNT/TF-1 reliably register hand presence at a small distance and are less sensitive to wet conditions when properly sealed.
- Vs other weatherproof touch-free devices: Some competitors offer similar IP ratings and sensor ranges, but differences typically come down to build quality (stainless steel vs plated metals), available mounting hardware, and adjustable features. The WP-EBNT/TF-1’s included back box, gasket, gland and security screws add installation convenience and protection, helping it stand out for external or exposed applications.
- Price and value: With a suggested retail price of approximately 39.99 / US$59.99 (regional variations apply), the WP-EBNT/TF-1 aims to balance robust construction and sensible pricing for commercial deployments. Investing slightly more than a basic push-button often yields savings over time through lower maintenance and longer life in challenging environments.
Customer feedback and user impressions
Actual customer reviews will vary by installation and environment; below are representative, anonymised impressions that capture common feedback themes from users of weatherproof touch-free exit buttons:
- "Facility manager, community hospital"— "Moving to touch-free exit switches reduced complaints about hygiene. Staff liked the clear LED feedback and the adjustable time setting made it work seamlessly with our automatic doors."
- "Installer, commercial kitchen"— "The stainless-steel finish and supplied back box made installation quick. The IP rating gave the client confidence for washdown areas where other buttons corroded quickly."
- "Security integrator"— "Double-pole volt-free contacts make wiring straightforward for different access panels. The adjustable proximity stops false triggers from people walking by too closely."
Note: These testimonials are illustrative and represent typical buyer experiences for this product type. For verified reviews, consult retailer listings or user forums where installations are documented.
Installation tips, compliance and practical considerations
To get the best performance from the WP-EBNT/TF-1, consider the following:
- Power supply: Use a stable 12/24 V DC supply sized to support the button and connected lock or controller. Confirm current draw and inrush characteristics with the system documentation.
- Wiring and switching: The device offers volt-free contacts; always follow the equipment manufacturers wiring diagrams and local electrical regulations. For mains-adjacent switching, use appropriate isolation relays or certified interfaces.
- Environmental sealing: Ensure the gasket and cable gland are correctly fitted and sealed during installation to maintain the IP rating, especially for external or washdown locations.
- Certification: Confirm CE/UKCA and other relevant markings on the datasheet or product label to meet local compliance requirements before installation.
Conclusion: Why the WP-EBNT/TF-1 is a strong choice
The RGL WP-EBNT/TF-1 combines practical features that matter in real-world access-control projects: robust stainless-steel construction, weatherproof sealing, adjustable sensing and timing, and flexible volt-free switching. Its design targets environments where hygiene, durability and reliable exit signalling are essential. Whether upgrading hospital doors, securing outdoor gates, or fitting automated entrances in high-traffic sites, this touch-free exit button offers a balanced mix of performance, ease of installation and value.
For project planners and installers seeking a dependable, weatherproof contactless exit switch with a compact footprint and sensible feature set, the WP-EBNT/TF-1 is a compelling option. Verify supply voltage, wiring arrangements and certification details from the datasheet and your access-control system provider to ensure seamless integration and long-term performance.
