Introduction: Meet the Ruijie RG‑AirMetro460G
Ruijie (Reyee) RG‑AirMetro460Gis a purpose‑built outdoor Customer Premises Equipment (CPE) tailored for long‑range wireless bridging on the 5 GHz band. Combining an integrated 23 dBi circular directional antenna, 802.11ac (Wi‑Fi 5) radio performance and a rugged IP65 housing, the unit targets wireless Internet service providers (WISPs), CCTV/backhaul links, and remote site connectivity projects. With a single Gigabit Ethernet port, included 24 V passive PoE injector and cloud management support, the RG‑AirMetro460G balances ease of deployment with the durability required for demanding outdoor environments.
Key features at a glance
- 5 GHz 802.11a/n/ac radio with up to 867 Mbps physical throughput.
- Integrated 23 dBi circular directional antenna (H: 9° / V: 9°) for long‑range PTP links (typical up to 15 km LOS).
- 1 × Gigabit Ethernet (10/100/1000) with 24 V passive PoE (injector included).
- Rugged IP65 enclosure, −40°C to +70°C operating range and high wind survivability.
- Electrical protection: 6 kV surge protection and ±24 kV ESD.
- Cloud and local management: Ruijie Cloud, Reyee mobile app and web GUI with diagnostic tools.
Detailed specifications and the benefits they deliver
- Frequency & standards:5 GHz, 802.11a/n/ac (Wi‑Fi 5). This provides modern OFDM modulation efficiency and compatibility with many contemporary wireless bridges.
- Throughput & channel widths:Up to 867 Mbps physical rate using 80 MHz channels (20/40/80 MHz supported). While real‑world throughput depends on link quality and overhead, the unit delivers ample capacity for many backhaul and last‑mile scenarios.
- Transmit power:0 to +26 dBm adjustable output to help balance range, regulatory compliance and interference management.
- Integrated 23 dBi circular directional antenna:Narrow 9° horizontal and vertical beamwidth focuses RF energy to extend range and reduce off‑axis interference—ideal for clear line‑of‑sight (LOS) point‑to‑point links out to roughly 15 km in good conditions.
- Circular polarization:Better resilience to multipath and alignment tolerances compared with some linear‑polarised dishes, useful where exact mechanical alignment is difficult.
- Gigabit Ethernet:Single 10/100/1000 Mbps RJ‑45 port supports high‑speed backhaul and PoE power feeding—useful when connecting cameras, switches or CPEs.
- Passive PoE (24 V) injector included:Simplifies installation by supplying power over the data cable; installers should verify cable lengths and voltage drop considerations for long runs.
- Rugged enclosure & protections:IP65 rating, wide operating temperature (−40°C to +70°C), 6 kV surge protection and ±24 kV ESD make the unit suitable for exposed towers, rooftops and remote poles.
- Power consumption & dimensions:Low power draw (<12 W) reduces requirements for feed power and battery backup; compact footprint eases mounting and wind loading considerations.
- Cloud and local management:Ruijie Cloud and the Reyee app provide remote monitoring, one‑touch pairing and firmware management—helpful for multi‑site deployments.
- On‑device diagnostics:Spectrum scan, ping, traceroute and link optimisation tools assist in planning links and troubleshooting interference or alignment issues.
- Security support:WPA2‑PSK, VLAN tagging and WMM—important controls for protecting traffic and prioritising real‑time streams such as video.
Use cases and scenarios where the RG‑AirMetro460G excels
- WISP last‑mile and subscriber backhaul:For small to medium WISPs, the integrated antenna and high gain simplify deployments by removing the need to source and align separate dishes—an attractive option for extending service to outlying subscribers.
- CCTV/video surveillance backhaul:The combination of directional gain, throughput and QoS (WMM) support makes the unit a good fit for delivering multiple camera streams from remote sites back to a central NVR or headend.
- Site‑to‑site bridging:Connect two buildings or remote facilities without leased lines. When clear LOS exists, users can expect stable throughput over substantial distances.
- Temporary or emergency links:Rapid deployability with included PoE injector and mounting hardware makes it useful for temporary connectivity in events, construction sites or emergency response setups.
- Rural broadband initiatives:In rural contexts where fiber is unavailable or expensive, the AirMetro460G helps carry customer traffic from a tower to remote subscriber locations or relays.
Comparisons with similar products on the market
Outdoor 5 GHz CPEs and bridges are offered by several vendors; the RG‑AirMetro460G sits in a competitive niche defined by integrated high‑gain antennas, rugged design and management flexibility. Here are some practical comparison points to consider when weighing options:
- Integrated antenna vs. separate dish:Integrated‑antenna devices like the RG‑AirMetro460G simplify mounting and alignment and reduce parts count. Alternatives using separate dishes can offer interchangeable antenna options and higher peak gain choices but add complexity.
- Throughput and radio generation:The RG‑AirMetro460G uses Wi‑Fi 5 (802.11ac) for up to 867 Mbps physical rates—performance adequate for many bridges today. Newer Wi‑Fi 6/6E CPEs may provide better spectral efficiency and higher MIMO capabilities, but at higher cost and sometimes greater power needs.
- Management ecosystem:Ruijie Cloud and Reyee app are strong for centralized visibility. Competing vendors (for example, Ubiquiti, Cambium, Mimosa) also provide cloud or controller ecosystems; choice often comes down to operator familiarity, third‑party integration and feature parity.
- Protection and reliability:The RG‑AirMetro460G’s IP65 rating and electrical protections are comparable to professional outdoor CPEs. High‑end models from other brands may offer higher ingress ratings (IP67) or factory‑certified extended warranties—consider site conditions when deciding.
- Price vs. performance:With a suggested retail price of around $89.99 (price may vary by region and reseller), the RG‑AirMetro460G positions itself as a cost‑effective option for installers looking for long‑range capability without a large capital outlay.
Customer feedback and installer impressions
Official customer testimonials for this specific model vary by reseller and region. Broadly, installer and user feedback for similar Ruijie/Reyee outdoor CPEs highlights a few recurring themes:
- Ease of deployment:The included PoE injector and mounting kit, plus cloud pairing features, are frequently cited as time‑savers in field installations.
- Link stability:When properly aligned in LOS conditions, users report stable throughput suitable for video and internet backhaul workloads.
- Value for money:Many small operators appreciate the balance of integrated antenna gain, ruggedness and an affordable price point.
- Areas for attention:As with all outdoor RF equipment, success depends on careful planning—cable quality, grounding/earthing, regulatory compliance and correct antenna alignment are commonly emphasised by experienced installers.
If you require verified user reviews, consult reseller pages, forum posts from installers in your region or Ruijie’s product pages where customer case studies may be posted.
Installation, safety and best practices
- Mount outdoors using the supplied hardware and ensure secure mechanical mounting to withstand wind and vibration.
- Use appropriate lightning protection and grounding per local regulations—outdoor antennas and metal structures are exposed to strikes and require bonding.
- Verify local radio regulations for allowed transmit power and channel usage; adjust settings and antenna alignment to minimise interference with neighbouring links.
- Perform a spectrum scan and link test during commissioning to confirm channel choice, signal‑to‑noise ratio and expected throughput.
Conclusion: Why choose the RG‑AirMetro460G?
The Ruijie RG‑AirMetro460G is a practical, well‑rounded outdoor wireless bridge aimed at installers and small to medium WISPs who need dependable, long‑range 5 GHz links without a premium price tag. Its integrated 23 dBi circular directional antenna, rugged design, electrical protections and support for cloud management make it particularly well suited to CCTV backhaul, rural broadband extension and site‑to‑site bridging where line‑of‑sight conditions exist. At a suggested retail price near $89.99, it represents an accessible option in the outdoor CPE market—offering strong value when balanced against performance and durability.
As with any RF deployment, success hinges on proper planning, careful alignment, appropriate grounding and adherence to local regulations. For a cost‑effective, easy‑to‑deploy 5 GHz solution with long‑range capability, the RG‑AirMetro460G is a solid choice—especially for projects that prioritise simplicity, integrated hardware and remote management.
