Introduction to the Ruijie RG-POE-50-60W-MG and its key features
Ruijie RG-POE-50-60W-MGis a compact single‑port Power over Ethernet (PoE) injector designed to deliver substantial power and faster-than‑Gigabit data to a single powered device (PD). It supplies up to 60 W (56 V DC @ ~1.08 A) over all four pairs of an Ethernet cable while supporting 2.5G (2500Base‑T) links. That combination makes it a focused solution for installers and integrators who need to power high‑performance Wi‑Fi access points, high‑power PoE cameras, and other 56 V passive PoE devices where speeds above 1 Gbit/s are required.
Key features at a glance:
- Single RJ45 port delivering data + power using 4‑pair powering (pins 1,2,4,5 = +; pins 3,6,7,8 = −).
- Output: 56 V DC @ 1.08 A (60 W) — suitable for Reyee/Ruijie 56 V devices and other compatible equipment.
- 2.5G Ethernet support for higher throughput than standard 1 Gbit links.
- Wide AC input range (100–240 VAC), internal surge/clamping protection, and low controlled inrush current.
- Compact desktop form factor for easy placement in closets, near APs, or in wiring cabinets.
Detailed description of specifications and benefits
The RG-POE-50-60W-MG is engineered for the niche where power-hungry PoE devices meet the need for multi‑gigabit connectivity. Below is a walkthrough of the principal specifications and the practical benefits they bring.
- Output:56 V DC, 1.08 A (60 W). This level of power supports modern high‑power access points and surveillance cameras that require more than the 30 W offered by PoE+ (802.3at).
- Powering method:4‑pair powering (pins 1,2,4,5 = + ; 3,6,7,8 = −). Using all four pairs improves current distribution and helps support higher power levels over Cat5e/Cat6 cabling.
- AC input:100–240 V AC (50/60 Hz) — suitable for global deployments and flexible in environments with varying line voltages.
Benefit: The combination of higher voltage and 4‑pair powering reduces cable heating and voltage drop over longer runs compared with some lower‑power options, enabling reliable delivery of up to 60 W where needed.
- Port speed:2.5G (2500Base‑T). Faster than standard 1 Gbit Ethernet, useful where access points or cameras can push more throughput.
- Ports:Single RJ45 carrying both data and power.
- PoE type:56 V passive / PoE++ style (non‑negotiated). It does not perform IEEE 802.3af/at negotiation; it applies power at a fixed voltage.
Benefit: 2.5G support future‑proofs deployments that leverage multi‑gig APs or edge devices capable of more than 1 Gbit throughput, avoiding a data bottleneck while supplying enough power.
- Efficiency:Approximately 80% or higher; switching frequency around 65 kHz.
- Protection:Difference and common‑mode surge/clamping protection with clamping around ≈65 V to help protect the powered device from transients.
- Environmental:Operating temperature 0 to 40 °C, storage −30 to 70 °C, and 35–95% RH non‑condensing humidity.
Benefit: Reasonable conversion efficiency keeps waste heat modest in the compact desktop form factor, while integrated protections and regulated output reduce risk to connected devices when used within the specified environment.
- Size:137.4 × 62.3 × 32.6 mm; weight ≈225 g.
- Form factor:Compact desktop — small enough for placement near a switch, inside a rack cabinet shelf, or in a conduit box area with AC access.
Benefit: The small footprint simplifies one‑off deployments where a full PoE switch is unnecessary or where a single high‑power device needs to be powered at a remote location.
Use cases and scenarios where the RG-POE-50-60W-MG excels
Because it pairs substantial power delivery with 2.5G data, this injector is well suited to a handful of focused applications:
- Wi‑Fi 6/6E access points:Many modern enterprise and high‑end consumer APs can draw well over 30 W and benefit from multi‑gig uplink speeds to handle airtime demand. This injector supplies both requirements.
- High‑power surveillance cameras:PTZ or multi‑sensor cameras with heaters, IR, and onboard processing often require more power while streaming high‑resolution video—2.5G helps prevent network congestion between camera and recorder.
- Edge devices and industrial PDs:Some industrial or edge compute devices accept passive 56 V PoE and need a single dedicated injector for installation simplicity.
- Quick site installs and retrofits:For installers adding a single AP or camera where running local AC is inconvenient, a single‑port injector is faster and cheaper than installing a PoE switch or dedicated PSU circuit.
These scenarios emphasize one‑device deployments or situations where data speed and power exceed what legacy 802.3af/at injectors can provide.
Comparisons with similar products in the market
When evaluating the RG-POE-50-60W-MG, consider three common categories of alternatives:
Pros: Auto‑negotiation with IEEE devices and broad interoperability. Cons: Limited to 15–30 W, insufficient for many Wi‑Fi 6 APs or high‑power cameras. The Ruijie unit wins on raw power and multi‑gig data capability but requires a PD that accepts 56 V passive PoE.
Pros: Centralized power management, multiple ports, and sometimes per‑port monitoring. Cons: Higher upfront cost, larger footprint, and may be overkill for a single powered device. A multi‑port switch is a better choice for dense deployments, while the Ruijie injector is more cost‑effective for single‑device needs.
Pros: Similar simplicity and power levels. Key differentiators are data speed (2.5G vs 1G), protection features, packaging, and brand ecosystem compatibility. The RG-POE-50-60W-MG stands out when 2.5G throughput and Reyee/Ruijie 56 V compatibility are priorities.
Customer testimonials and reviews
There are no official customer reviews included in the provided product data. However, based on common installer feedback patterns for similar devices, purchasers generally highlight:
- Appreciation for the simple, compact design that is easy to deploy for single devices without the need for a bulky switch.
- Positive reaction to the 2.5G capability when used with multi‑gig APs—customers note improved uplink headroom versus 1 Gbit injectors.
- Reminders from integrators to verify device compatibility because the injector uses 56 V passive PoE; mismatched PDs can be damaged if they do not explicitly accept this powering method.
Tip: Before purchasing, check vendor documentation for your AP or camera to confirm acceptance of 56 V passive PoE and, if possible, consult real‑world reviews from customers who have used the same PD‑injector pairing.
Conclusion: Why this product is a great choice
The Ruijie RG-POE-50-60W-MG occupies a clear niche: a small, affordable, single‑port injector that combines 60 W of power delivery with 2.5G data throughput. For installers and integrators tasked with powering a single high‑power device—especially modern Wi‑Fi 6/6E access points or advanced cameras—that require both higher voltage and faster-than‑Gigabit links, this injector provides a targeted, cost‑effective solution.
Its strengths are straightforward: higher power via 4‑pair 56 V delivery, multi‑gigabit Ethernet support to avoid bottlenecks, wide AC input for flexible deployment, and built‑in surge/clamping protections. The small footprint and desktop form factor make it easy to position where needed without complex infrastructure changes.
Important caveats: because this is a passive 56 V PoE device (non‑negotiated), compatibility must be verified with the powered device to avoid damage. Also confirm local certification and supplier warranty terms before installation.
Overall, if you need a single, reliable injector capable of powering demanding PoE devices while supporting 2.5G network speeds, the RG-POE-50-60W-MG is a pragmatic choice that balances power, performance and simplicity at an attractive price point.
