Introduction: Meet the Texecom Premier Elite PSU200
Texecom Premier Elite PSU200 (HAA-0001)is a purpose-built, monitored 2.5 A switch‑mode power supply designed for commercial and industrial wired intruder alarm systems. Housed in a tamper‑protected metal enclosure, the PSU200 delivers a supervised 12 V auxiliary output, selectable battery charge rates, fault reporting and internal space for standby batteries. For installers who need reliable mains/battery supervision and panel‑level diagnostics, the PSU200 represents a pragmatic balance of features, size and performance.
The unit is commonly listed with a suggested retail price of 129.99; check local suppliers for current pricing and availability. A PSU200XP variant adds an 8XP zone expander for applications that need monitored expansion alongside the power supply.
Key features at a glance
- Intelligent 2.5 A switch‑mode supply (nominal usable output ≈2.3 A) with >80% efficiency.
- Monitored outputs and full diagnostics when integrated with Premier / Premier Elite panels (fault, AC fail, battery fault, tamper).
- Internal battery bay supporting 2 × 7 Ah or 1 × 17/18 Ah sealed lead‑acid (SLA) batteries.
- Selectable battery charge current (0.3 A or 0.75 A), periodic battery load test and deep discharge protection.
- Front and rear tamper switches plus dedicated fault relay outputs for panel integration.
Detailed specifications and benefits
The PSU200 is targeted at systems where supervision and predictable battery management are important. Below are the core technical details and how they translate into practical benefits.
- Mains supply: 100–240 V AC, 50 Hz, up to 1 A — enables worldwide mains compatibility and convenient installation in varied sites.
- Output current: 2.5 A supply (nominal usable ≈2.3 A) — sufficient for many small to medium commercial systems powering a control panel, detectors, signalling devices and accessories.
- Output voltage: 10.7–13.9 V DC (charge target 13.7 V ±2%) — provides stable, regulation suitable for modern alarm panels and peripherals.
- Battery charge options: selectable 0.3 A or 0.75 A — gives installers flexibility to match charge rate to fitted battery capacity for longevity and correct maintenance.
- Maximum ripple: 0.5 V pk‑pk — low ripple helps minimise nuisance resets or interference with sensitive alarm electronics.
- Fuses: mains fuse (3 A or 3.15 A) and output fuse (1.6 A) — standard, serviceable protection for safe operation.
- Supported battery types: sealed lead acid (SLA) — the industry standard for standby power in alarm systems.
- Internal battery bay: accommodates 2 × 7 Ah or 1 × 17/18 Ah — convenient for installers who want internal battery mounting without a separate enclosure.
- Battery low alarm: approximately 11.0 V ±5% at the BATT terminal — allows the connected panel to flag low battery conditions before critical failure.
- Deep discharge cut‑off: electronic disconnect ≈9.0 V — protects the battery from excessive discharge and extends service life.
- Dimensions: 310 × 410 × 100 mm — compact enough for typical cabinets or plant rooms while providing internal space for batteries.
- Packed weight: ≈3.9 kg — lightweight for its class, simplifies handling on site.
- Enclosure: metal with front and rear tamper — improves physical security and helps meet site tamper detection requirements.
- Operating range: −10 °C to +50 °C, humidity up to 95% non‑condensing — suitable for most commercial indoor environments.
Where the PSU200 stands out is in integration with Texecom Premier and Premier Elite control panels. The supply provides supervised fault outputs for AC fail, battery fault and general fault conditions as well as tamper signals. These outputs allow the alarm panel to report PSU status centrally, enabling remote diagnostics and clear site reporting — an important feature for managed security installs and service contracts.
Use cases and scenarios where the PSU200 excels
The PSU200 is well suited for a range of installations where supervised, serviceable power is required. Typical scenarios include:
- Small to medium commercial premises: offices, retail units and small warehouses where a single panel serves multiple detection zones and requires monitored power and battery backup.
- Multi-site managed services: sites covered by maintenance contracts benefit from the PSU200’s panel‑level diagnostics and event reporting so engineers can prioritise, diagnose and respond quickly.
- Industrial or plantroom installations: the metal enclosure, tamper protection and selectable charge rates make it suitable for harsher installed environments where battery longevity and secure mounting are priorities.
- Installations needing onboard battery storage: when an external battery enclosure is undesirable, the internal bay that fits 2×7 Ah or a single 17/18 Ah battery keeps the footprint compact.
- Systems requiring monitored expansion: choose the PSU200XP variant when you need power and an 8‑zone monitored expander combined in one enclosure for neat installations.
How the PSU200 compares with similar power supplies
To evaluate the PSU200, it helps to compare it in two dimensions: with basic, unmonitored alarm power supplies and with higher‑end / competitor monitored units.
Compared with simple, unmonitored switch‑mode supplies, the Texecom PSU200 offers clear advantages for security installations: supervised outputs, tamper detection and battery diagnostics. Unmonitored supplies may be cheaper up front but they provide no panel‑level fault reporting, which increases service overheads and can leave sites blind to power issues until a scheduled or reactive visit.
Higher‑end PSUs from other manufacturers may offer larger currents, advanced networked telemetry or integrated surge protection. The PSU200, by contrast, focuses on the sweet spot for many commercial installs: adequate output (≈2.3 A usable), on‑board battery capacity for typical backups, and seamless integration with the Texecom Premier Elite ecosystem. If your project requires significantly higher current or advanced remote management, look to larger or branded networked PSUs; if you need solid, panel‑level supervision without unnecessary complexity, the PSU200 is competitive.
- Selectable charge rate — helps match the battery to load and prolongs battery life compared with fixed‑rate units.
- Integrated tamper and fault relays — simplifies wiring and panel integration versus using separate modules.
- Compact internal battery bay — reduces parts count and installation time compared with remote battery enclosures.
Customer feedback and installer impressions
There are no specific public customer testimonials supplied here, but typical installer feedback for monitored Texecom power supplies centres on reliability and easy integration. Common practical observations reported by installers in the field include:
- Appreciation for the monitored outputs — faults and AC failures are visible at panel level, reducing time spent diagnosing site issues.
- Positive notes on build and tamper features — the metal box and front/rear tamper switches suit commercial installs where physical security is a requirement.
- Approval of selectable charge currents — installers value the option to use a lower charge for smaller batteries to extend life, or a higher charge when a larger battery is installed.
If you require formal user reviews or case studies, consult reseller sites and Texecom’s documentation or request case examples from distributors and installers who have deployed the Premier Elite range.
Conclusion: Why choose the Texecom Premier Elite PSU200?
The Texecom Premier Elite PSU200 is a sensible, feature‑rich power supply for commercial and industrial intruder alarm projects that demand supervised power and reliable battery management. It combines a compact metal enclosure with monitored outputs, selectable charging, internal battery accommodation and tamper detection — all designed to integrate tightly with Texecom Premier and Premier Elite control panels.
For installers and security managers who prioritise panel‑level diagnostics, predictable battery performance and a neat installation footprint, the PSU200 provides a practical balance of capability and cost. If your system needs modest continuous auxiliary power with robust monitoring — or you prefer a power supply that simplifies service and fault reporting — the PSU200 is worth considering. For larger power requirements or advanced remote telemetry, evaluate higher‑current or networked alternatives, but for many sites the PSU200 will meet the requirement efficiently and reliably.
Note on certification and installation:reseller listings indicate the Premier Elite range is associated with PD6662 / EN50131 Grade 3 Class II; confirm exact certifications (CE/UKCA) for your region with Texecom and always follow local wiring regulations and the supplied installation manual. Isolate mains before installation and use the recommended SLA battery types to maintain safety and system longevity.
