Introduction to the Texecom Premier Elite PSU200XP
Texecom Premier Elite PSU200XP (CCJ-0001)is a purpose‑built, commercial‑grade power supply and battery charger designed for wired intruder alarm systems. Combining a 2.5 A switch‑mode power supply with a built‑in Premier Elite 8XP zone expander, the PSU200XP simplifies installation and improves system reliability for medium and larger alarm installations. It is housed in a locked metal enclosure, offers monitored power and diagnostics with Premier Elite control panels, and is engineered to meet industry standards including PD6662 and EN50131 (Grade 3, Class II).
Key features at a glance
- 2.5 A rated switch‑mode power supply with nominal available current around 2.3 A depending on battery configuration.
- Integrated Premier Elite 8XP zone expander — adds additional wired zones without a separate module.
- Selectable battery charging: 0.3 A or 0.75 A with 13.7 V ±2% charge voltage.
- Supports 1×18 Ah (or 17 Ah) sealed lead‑acid battery, or 2×7 Ah monitored batteries.
- Monitored mains/battery diagnostics, over‑voltage protection, low battery signalling and deep‑discharge cut‑off.
- Designed and approved for commercial installations — PD6662 / EN50131 Grade 3 compliance.
Detailed specifications and benefits
The PSU200XP combines careful electrical design with practical installer features. Below are the most relevant specifications and the benefits they deliver in real installations.
- Rated output current:2.5 A (nominally ~2.3 A available to the system depending on battery and wiring). This output is sufficient for many medium commercial intruder alarm systems, allowing multiple detectors, sounders and ancillary devices to be powered without requiring a larger external PSU.
- Output and charge regulation:Output voltage range 10.7 V – 13.9 V with battery charge voltage set to 13.7 V ±2%. Accurate voltage regulation helps ensure reliable detector and communicator operation and good battery lifecycle performance.
- Selectable battery charge current:0.3 A or 0.75 A. Lower charge rates are appropriate for larger batteries or long battery life priorities, while the higher rate shortens recharge time after discharge events.
- Battery support:Accepts 1×18 Ah (or 17 Ah) sealed lead‑acid battery or 2×7 Ah batteries. This flexibility lets installers choose battery capacity based on standby time requirements and enclosure space.
- Protection features:Includes deep discharge cut‑off (8.6 V ±5% at BATT terminals), low battery signalling (11.0 V ±5%), and over‑voltage protection (16 V). These protections safeguard connected electronics and the battery, and they provide supervised status reporting to Premier Elite control panels.
- Metal enclosure:Durable, lockable metal housing suitable for commercial sites and tamper‑resistant installations.
- Dimensions and weight:310 × 410 × 100 mm, packed weight approximately 4.1 kg — compact enough for standard alarm cabinets while allowing room for a full‑size 18 Ah battery when required.
- Operating conditions:−10 °C to +50 °C, up to 95% non‑condensing humidity — suitable for a wide range of indoor commercial environments.
- PD6662 / EN50131‑1 / EN50131‑6:Compliance with these standards and Grade 3, Class II designation means the PSU200XP meets the robustness and supervision requirements expected in commercial or higher‑risk sites where alarm integrity is critical.
- Integrated zone expansion:The built‑in 8XP saves space and installation time compared with fitting a separate expander module. Fewer components also simplifies wiring and reduces potential points of failure.
- Monitored power:When used with Premier Elite control panels, the PSU200XP offers supervised mains and battery diagnostics which allow early detection of issues such as battery depletion, charger faults or power supply failure.
- Switch‑mode efficiency:Switch‑mode design yields lower heat, smaller size, and higher efficiency than older linear PSUs — beneficial in enclosed cabinets and for energy consumption.
Use cases and scenarios where the PSU200XP excels
The PSU200XP is aimed at commercial and industrial intruder alarm systems where supervision, reliability and compliance are priorities. Typical scenarios include:
- Retail premises and multiple‑room stores:The integrated 8‑zone expansion and reliable power make it well suited to retail sites with multiple detection zones and door contacts across storefronts and stockrooms.
- Small to medium offices:Offices that need discrete, supervised alarm installations can benefit from the compact metal enclosure, monitored diagnostics and battery backup capability.
- Light industrial and workshops:Sites with higher risk exposure often require Grade 3 systems and supervised PSUs — the PSU200XP meets these expectations while supporting larger batteries for longer standby times.
- Refurbishments and upgrades:When upgrading an older alarm system, replacing an out‑of‑date PSU with the PSU200XP adds zone capacity and modern supervised power without the need for a full control panel swap (when compatible Premier Elite panels are present).
Comparisons with similar options on the market
When selecting a PSU for a commercial alarm system, installers typically weigh capacity, supervision, expandability and compliance. The PSU200XP’s distinguishing points are the built‑in 8XP expander and Grade 3 compliance.
Many switch‑mode PSUs offer similar current ratings, but they require a separate expander for additional zones. The PSU200XP reduces parts count and wiring complexity by combining both functions in one enclosure — a practical advantage in installs where cabinet space and cabling runs are at a premium.
Consumer and low‑grade PSUs often lack monitored outputs, supervised battery diagnostics and the compliance required for commercial sites. For installations that must meet PD6662 / EN50131, selecting a Grade 3 rated unit such as the PSU200XP is essential to meet regulatory or insurance requirements.
Higher‑capacity PSUs exist for large systems that demand higher continuous currents or multiple huge batteries. The PSU200XP sits in the middle: it is ideal for medium systems and offers a balance of current, battery support and on‑board expansion. For very large sites, a higher‑rated PSU or multiple supplies may still be appropriate.
Customer testimonials and installer feedback
There are limited publicly available, product‑specific testimonials for the CCJ‑0001 at the time of writing. However, common feedback themes from professional installers and integrators installing Premier Elite systems generally include:
- Appreciation for the integrated 8‑zone expander that reduces installation time and simplifies wiring runs.
- Positive remarks about the monitored outputs and how integration with Premier Elite control panels helps with remote diagnostics and faster fault resolution.
- Recognition that Grade 3 compliance is necessary for higher‑risk commercial premises and that the PSU200XP provides compliant power supervision at a reasonable price point.
If you require detailed user reviews, consult installer forums, trade distributors or ask your Texecom supplier for references from local integrators who have used the unit in similar installations.
Conclusion: Why choose the Texecom PSU200XP?
The Texecom Premier Elite PSU200XP (CCJ‑0001) is a well‑balanced choice for commercial intruder alarm installations that need a reliable, supervised power supply with built‑in zone expansion. Its combination of a 2.5 A switch‑mode supply, selectable charging, support for substantial sealed lead‑acid batteries, and Premier Elite supervised diagnostics makes it particularly suitable for retail, office and light industrial environments where compliance and continuity of protection matter.
For integrators, the integrated 8XP reduces material and labour costs; for end customers, Grade 3 compliance and monitored battery management offer peace of mind. Priced at a suggested retail of around £169.99, the PSU200XP provides a pragmatic balance of features and value for medium‑sized professional alarm systems. As with any safety‑critical equipment, ensure installation is carried out by a qualified engineer and that battery selection and wiring follow Texecom’s datasheet and local regulations.
