Texecom TFM018-2 Replacement Transformer for Veritas R8/V8, 230–240V→12V

Introduction to the Texecom TFM018-2 Replacement Transformer

Texecom TFM018-2 Replacement Transformeris a genuine internal replacement transformer and power supply designed specifically for the Texecom Veritas R8 and V8 intruder alarm control panels. When a Veritas panel loses mains power, or its original transformer fails or becomes noisy, the TFM018-2 restores the AC supply required by the panel and ensures batteries charge correctly. Compact and built for internal mounting, it is the go-to replacement for professional installers and system owners who want a direct-fit Texecom genuine part.

Key Features

• Genuine Texecom part:Manufactured to match the original Veritas internal transformer specification and form factor.
• Mains input:230–240 V AC at 50–60 Hz — suitable for standard supply in most regions using this voltage range.
• Low-voltage output:Commonly listed as 12 V AC secondary for panel power and battery charging (see note below about a specification discrepancy reported by resellers).
• Compact direct-replacement form factor:Designed to mount inside the Veritas R8/V8 enclosure, providing an easy swap with minimal modification.
• Supplier code:ITM004299 for ordering and stock enquiries (your record shows stock = 0 as of 2025-09-12 — confirm with supplier).

Detailed Specifications and Benefits

Understanding the technical specification is essential when replacing internal power components for alarm panels. The TFM018-2 is typically described with the following specification points:

• Manufacturer:Texecom.
• Model / Part no.:TFM-018-2.
• Intended for:Texecom Veritas R8 and V8 alarm control panels.
• Input voltage:230–240 V AC.
• Frequency:50–60 Hz.
• Output voltage:Commonly listed as 12 V AC. Important note: at least one reseller listing references approximately 20 Vrms (21 VA). This discrepancy means you should confirm the exact secondary voltage/VA rating either from the original unit label or the official Texecom datasheet before fitting.
• Dimensions (reported):Approximately 50 × 55 × 45 mm (reseller reports — check the physical part against the existing fitting).
• Stock / supplier code:ITM004299 — verify current availability before ordering.

Benefits of choosing the genuine TFM018-2 include compatibility assurance, correct physical fit, and predictable behaviour with Veritas charging circuitry. Using the factory replacement reduces the risk of incorrect voltage output, mismatched mounting holes, or inadequate current/VA capacity that could damage the panel or cause battery charging faults.

Installation, Safety and Verification

Replacement of an internal transformer is not a routine user-level task. Key points to consider:

• Always isolate mains power before opening the alarm panel or replacing the transformer.
• Installation should be carried out by a qualified electrician or approved alarm installer. Texecom installation guidance should be followed closely.
• Verify the exact secondary voltage and VA rating printed on the replacement unit and compare it with the label on your original transformer or the official Texecom specification. Voltage discrepancies can affect battery charging behaviour and the panel's AC sensing.
• If the original transformer exhibited audible noise or overheating before failure, confirm the cause — sometimes symptoms relate to other failing components such as capacitors in the panel power circuitry.

Use Cases and Scenarios Where the TFM018-2 Excels

This replacement transformer is particularly suitable in the following scenarios:

• Failed or noisy original transformer:If the Veritas panel is losing AC power, not charging the backup battery, or producing transformer hum, installing a genuine Texecom TFM018-2 restores the intended power source.
• Direct-fit requirement:Installers who prefer to use OEM parts to guarantee physical compatibility and preserve warranty and performance characteristics will favour an original Texecom unit.
• Minimal downtime:For commercial or residential systems where quick, reliable replacement is needed, the compact direct-replacement design reduces modification and installation time.
• Maintenance replacements:As part of periodic alarm system maintenance, replacing an aging transformer with the same model can prevent future nuisance alarms and power-related faults.

Comparisons with Similar Products on the Market

When evaluating replacement transformers for alarm panels you typically have three options: genuine OEM replacements (like the TFM018-2), aftermarket or third-party replacements, and universal/bench power modules. Each has trade-offs:

• Genuine Texecom (TFM018-2):Pros — assured compatibility, correct mounting and electrical characteristics, better support for warranty or service. Cons — availability can be limited (stock shows 0 in your record), and price may be slightly higher than generic alternatives (suggested price reference: 8.99 in your data).
• Aftermarket/third-party transformers:Pros — often cheaper and more readily available. Cons — risk of incorrect voltage/VA ratings, different pinouts, larger noise, or unreliable battery charging behaviour. Using non-OEM parts can introduce installation headaches and potential damage to the panel if the output does not match the original design.
• Universal power modules or external power supplies:Pros — flexibility and sometimes higher power capacity. Cons — may require re-housing, additional wiring, or modifications to the panel; not a direct internal replacement and may void support agreements.

In short, for a direct internal replacement where minimal modification and guaranteed compatibility are priorities, the Texecom TFM018-2 is the sensible choice. If the exact secondary voltage/VA rating is critical — for example, if you see a listing suggesting ~20 Vrms instead of 12 V — take the time to confirm before fitting or consider contacting Texecom support.

Customer Testimonials and Installer Feedback

There are few publicly available formal customer reviews specifically for the TFM018-2 part number. Instead, the typical feedback available from trade forums and installer notes tends to emphasize the following themes (these are aggregated observations rather than verbatim customer quotes):

• Installers appreciate the direct-fit nature of genuine Texecom replacements because it saves time and reduces on-site adaptation.
• When the correct secondary voltage is confirmed, the transformer reliably restores battery charging and AC presence to the Veritas panels.
• Some resellers list a different secondary voltage/VA on their pages, prompting installers to double-check the physical label and official datasheet before completing the swap.
• Customers replacing failing or noisy transformers often report that the replacement eliminates hum and power-fail warnings, restoring normal operation.

If you depend on verified user reviews for purchase decisions, consider asking suppliers for return policies, warranty terms, or whether they can supply datasheets and photographs of the actual unit to confirm secondary markings before buying.

Conclusion: Why the Texecom TFM018-2 Is a Strong Choice

The Texecom TFM018-2 replacement transformer is a practical and sensible option for anyone maintaining or repairing Texecom Veritas R8 and V8 intruder alarm panels. As a genuine Texecom part, it offers the advantages of compatibility, correct form factor, and predictable interaction with the panels charging and sensing circuits. Its compact design simplifies internal replacement and reduces installation time.

Key caveats are straightforward: verify the exact secondary voltage and VA rating against the original unit or official Texecom documentation before fitting, and always have a qualified electrician or approved alarm installer perform the replacement. Also, note current stock records may show zero availability — always confirm supply with your vendor using supplier code ITM004299.

For professional installers and conscientious system owners who prioritise reliability and a direct-fit replacement, the TFM018-2 is an economical and effective solution to restore mains-derived power and battery charging functions to Veritas alarm panels.