Introduction to the Texecom Veritas Impaq E Vibration Sensor (AEA-0002)
The Texecom Veritas Impaq E Vibration Shock Sensor (model AEA-0002) is a compact, wired perimeter detector designed to give early warning of forcible entry to doors, windows and other exposed surfaces. Built around Texecoms VIBER1 3-axis accelerometer technology and digital signal processing (DSP), the Impaq E senses sub-surface shock transmission while rejecting many common airborne noises that cause false alarms. Available in a brown finish to blend with timber frames and joinery, the AEA-0002 is presented as a practical Grade 2-capable option for both domestic and light commercial installations.
Key features at a glance
- Model: Texecom Veritas Impaq E AEA-0002 (Brown)
- Detection type: Vibration / shock (3-axis accelerometer)
- Technology: VIBER1 accelerometer with DSP for sub-surface shock detection
- Sensitivity: 5 selectable digital sensitivity settings to adapt to different surfaces and environments
- Setup: LED-assisted setup and sensitivity indication for easier commissioning
- Standards: Listed as EN 50131-2-8 / Grade 2 capable (Impaq family)
- Form factor: Compact, surface-mounted design in brown finish ideal for wooden frames
- Price guidance: Suggested retail price approx. 15.99 (confirm local tax/VAT treatment)
Detailed specifications and benefits
The Impaq E AEA-0002 is engineered around a 3-axis accelerometer and digital signal processing. This combination provides several tangible benefits for perimeter protection:
- Sub-surface detection The VIBER1 accelerometer senses shock transmitted through the structure (glass, frames or panels) rather than relying solely on airborne sound. That means forcible impacts, chiselling or levering that generate structural vibration are more likely to be detected early.
- False alarm resilience DSP filtering helps reject airborne noise and other environmental disturbances that frequently trigger acoustic glassbreak detectors or simple piezo sensors. The result is fewer nuisance activations in typical domestic and light commercial settings.
- Adjustable sensitivity Five digital sensitivity levels let installers tune detection for the specific substrate and security requirement: high sensitivity for brittle glass or thin panels, lower settings for heavier frames or vibration-prone locations.
- LED-assisted setup Visual indicators speed up commissioning by showing detection events and sensitivity response during placement and calibration.
- Standards The Impaq family is listed as EN 50131-2-8 / Grade 2 capable, making it suitable for standard residential and light commercial systems where Grade 2 compliance is required by insurance or specification. Installers should confirm the exact listing and system configuration for formal compliance.
Note: Certain technical details such as wiring/EOL resistor values, power consumption and device dimensions were not provided in the available data. Installers should consult Texecoms official installation manual for exact wiring diagrams, EOL requirements and mounting instructions before installation.
How it performs in real-world scenarios: use cases and ideal applications
The Impaq E AEA-0002 is particularly well-suited to situations where early detection of forcible entry is needed and where aesthetics or discreet mounting are priorities. Typical use cases include:
- Domestic windows and patio doors For homeowners seeking early warning of break-in attempts, the sensor can be surface-mounted to frames or glazing beads where it picks up vibration from forced impacts or levering.
- Timber and composite doors The brown finish matches many wooden frames and doors, making it a neat option where visible sensors must be unobtrusive.
- Secondary glazing and lightweight panels The ability to tune sensitivity helps the detector work on a range of substrates, from single-pane glass to composite panels that transmit vibration differently.
- Light commercial premises Small shops, offices and storage rooms that require Grade 2-level perimeter detection can use Impaq E sensors as part of a wired alarm system.
- Complementary detection layers Use Impaq E units alongside magnetic contacts and motion detectors for layered protection: the vibration sensor targets forced entry methods that might defeat simple reed switches.
Because the sensor is wired, it is best deployed where cabling is accessible or can be concealed during installation. It is a trade-friendly device that also appeals to DIY-savvy users comfortable with basic alarm wiring, though installers should always follow the manufacturers guidance for compliance and reliability.
Comparisons with similar products and alternative approaches
Vibration/shock sensors occupy a distinct niche among perimeter detectors, and understanding how the Impaq E compares helps specify the right system for a given site:
- Vs acoustic glassbreak detectors Acoustic sensors listen for the sound signature of glass breaking. They can be effective but are susceptible to noise and sometimes struggle with insulation or secondary glazing. The Impaq Es accelerometer approach senses structural shock rather than airborne sound, improving resilience to environmental noise and reducing false alarms in many situations.
- Vs simple piezo shock contacts Basic piezo devices detect surface vibration but often lack sophisticated DSP and multi-axis sensing. The Impaq Es 3-axis accelerometer and digital filtering provide a more refined detection profile and better rejection of non-threatening stimuli.
- Vs magnetic/reed contacts Reed switches detect opening events but can be defeated if a window or panel is forced without breaking the contact. Vibration sensors detect impact and levering actions that might not interrupt a magnetic contact, so combining both types provides stronger protection.
- Vs higher grade sensors For high-security Grade 3 or specialist applications, there are sensors with more rigorous certification and environmental tolerance. The Impaq E is targeted at Grade 2 scenarios: it offers a strong balance of performance and cost for residential and light commercial sites, but specify higher-grade equipment where required by risk assessment.
Customer feedback and installer impressions
At the time of writing, there are limited verified public customer testimonials specifically for the AEA-0002. However, installer commentary on VIBER-based Impaq sensors in general highlights a few recurring themes:
- Positive: Installers often praise the tuning flexibility and false-alarm resilience provided by DSP and selectable sensitivity settings. The LED-assisted setup is noted as practical for commissioning on site.
- Neutral / Cautionary: Some installers point out the need to follow mounting and wiring guidance closely. Surface type and mounting method affect sensitivity, so initial setup and testing are important to avoid nuisance triggers.
- Price perception: The suggested retail price (around 15.99) is perceived as affordable for adding an extra layer of perimeter protection compared with some specialist glassbreak or wireless sensors.
Because comprehensive warranty and dimensional data were not provided, prospective buyers should verify warranty terms and physical compatibility with their frames before purchase. Where possible, consult trade reviews or seek hands-on feedback from local installers familiar with Texecoms Impaq family.
Conclusion: why choose the Texecom Veritas Impaq E AEA-0002?
The Texecom Veritas Impaq E (AEA-0002) represents a practical, cost-effective option for perimeter vibration detection. Its use of VIBER1 3-axis accelerometer technology with DSP gives it an edge over basic shock contacts and many acoustic detectors by focusing on sub-surface shock and rejecting common airborne noise sources. Five selectable sensitivity levels and LED-assisted setup make it adaptable to different materials and straightforward to commission.
As a Grade 2-capable device, the Impaq E suits most domestic and light commercial applications where reliable early warning of forcible entry is required without the premium cost of higher-grade products. The brown finish provides a discreet aesthetic for timber doors and windows, and the modest suggested price makes it an accessible addition to a layered alarm strategy.
Final note: installers and buyers should consult Texecoms official installation manual for wiring, EOL resistor values and mounting guidance to ensure correct operation and compliance. Where higher security or specific certification is required, consider the broader Impaq range or alternate Grade 3 solutions as appropriate.
